1. Introduction
The XZT L336 Universal Smart Remote Control is designed to consolidate control of multiple infrared (IR) devices into a single, easy-to-use unit. Featuring a learning function, it can replicate signals from your original remote controls for various appliances such as TVs, Cable Boxes (CBL), DVD players, Satellite TV (SAT-T) receivers, VCD players, CD players, and HI-FI systems. This manual provides essential information for setup, operation, and maintenance.
Front view of the XZT L336 Universal Smart Remote Control.
2. Safety Warnings and Information
Please read all safety information before using the product.
- DANGER: Do not use in damp or high-temperature environments.
- WARNING: Keep out of reach of children to prevent accidental ingestion. In case of ingestion, seek medical attention immediately.
- CAUTION: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements. (Note: This remote uses standard AAA batteries, not lithium-ion. Please dispose of AAA batteries according to local regulations.)
- CAUTION: While using the product, please wear protective equipment and fully comply with the applicable law and regulations. (Note: This warning seems generic and may not directly apply to a remote control, but is included as per source material.)
- CAUTION: Please strictly follow the instructions, safety tips, and use the product with caution.
3. Setup
3.1 Battery Installation
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
Back view of the L336 remote control, illustrating the battery compartment.
3.2 Learning Function (Programming)
The L336 remote control learns commands from your original infrared (IR) remote controls. It is crucial to have a working original remote for this process. This remote does NOT support radio frequency (RF) remotes.
- Place the L336 remote control and your original remote control head-to-head on a flat surface, approximately 1-3 cm apart.
- On the L336 remote, press and hold the desired device button (e.g., TV, SAT, DVD) for about 3 seconds until the red LED indicator lights up continuously. This indicates it's in learning mode.
- Press the button on your original remote control that you wish to copy (e.g., Power button). The red LED on the L336 will flash rapidly.
- While the LED is flashing, press the corresponding button on the L336 remote control where you want to store the command (e.g., the Power button on the L336). The LED will flash three times and then remain lit, indicating successful learning.
- Repeat steps 3 and 4 for all other buttons you wish to program for that device.
- Once all desired buttons are programmed for a device, press the device button again (e.g., TV) on the L336 to exit learning mode. The red LED will turn off.
- Test the programmed buttons to ensure they function correctly.
Note: If the LED does not flash or the learning process fails, ensure the remotes are properly aligned and close enough, and that the original remote has sufficient battery power. Some original remotes may have stronger or weaker IR signals, requiring slight adjustments in distance.
Watch this video for a demonstration of the learning process:
Video demonstrating the learning function of the L336 remote control.
4. Operating Instructions
After successful programming, operating the L336 remote is straightforward:
- Select the desired device by pressing the corresponding device button (e.g., TV, SAT, DVD) at the top of the remote. The LED will briefly light up to confirm selection.
- Point the L336 remote control directly at your appliance.
- Press the desired function button (e.g., Power, Volume Up/Down, Channel Up/Down, Number buttons) to control your device.
Close-up view of the L336 remote control buttons.
5. Maintenance
- Keep the remote control clean by wiping it with a soft, dry cloth.
- Avoid exposing the remote to direct sunlight, extreme temperatures, or high humidity.
- If the remote control is not used for an extended period, remove the batteries to prevent leakage.
- Replace batteries when the remote's performance degrades or the LED indicator becomes dim.
6. Troubleshooting
- Remote not responding: Check if the batteries are inserted correctly and have sufficient charge. Replace them if necessary.
- Learning function not working:
- Ensure the L336 and original remote are placed head-to-head, 1-3 cm apart.
- Verify that the original remote is working and has fresh batteries.
- Make sure the L336 is in learning mode (red LED continuously lit) before pressing buttons.
- Some original remotes may have weaker IR signals; try adjusting the distance slightly or holding the button longer.
- Confirm that your original remote uses infrared (IR) signals. This remote does not support radio frequency (RF) remotes.
- Buttons not performing desired function: The learning process might have failed for specific buttons. Re-program the problematic buttons following the steps in Section 3.2.
- Damage or Malfunction: If the remote control is physically damaged or experiences a persistent malfunction that cannot be resolved by troubleshooting, please contact customer service for resolution.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | L336 |
| Wireless Communication | Infrared (IR) |
| Use | TV, CBL, DVD, SAT-T, VCD, CD, HI-FI |
| Origin | Mainland China |
| Length | 20 cm |
| Width | 10 cm |
| Height | 10 cm |
| Weight | 0.075 kg |
8. User Tips
- Always ensure you have a fully functional original remote control when attempting to program the L336.
- The L336 remote control is designed for infrared (IR) signals only. It will not work with devices that use radio frequency (RF) remote controls.
- If you encounter difficulties with programming, try replacing the batteries in both the L336 and your original remote.
- For optimal learning, ensure a quiet environment with minimal ambient light interference.
9. Warranty and Support
For any quality-related issues, malfunctions, or if you require further assistance, please contact customer service. You may also refer to the official user manual PDF for additional details, available at User manual (PDF).