1. Introduction
Thank you for purchasing our Any Toyo Toyota 4A/8A smart key data collector & emulator. With this collector, an XTOOL tablet, Internet connection and a KC501 key programmer, you can generate an emulated Toyota 4A/8A smart key without searching for pincode, which could be used for emergency ignition or act as an original key in order to add keys when there are no original keys available. With our programmable keys, you can also generate a 4A/8A smart key which is matched on this car without searching for pincode or connecting to the module.
The emulated data will be erased from the emulator once it is disconnected to XTOOL devices.
The XTOOL D7 is an advanced automotive diagnostic tool designed for comprehensive vehicle system diagnostics, ECU coding, key programming, and bi-directional control. It supports modern protocols like CAN FD and DOIP, offering a one-stop solution for vehicle maintenance and repair.
Video 1: XTOOL D7 Bidirectional Scan Tool Overview
2. Safety Information
Please read all instructions carefully before using the device. Failure to follow safety guidelines may result in injury or damage to the device or vehicle. Always operate the device in a well-ventilated area. Do not expose the device to moisture or extreme temperatures. Keep the device away from children.
3. Package Contents
The XTOOL D7 package includes the following items:
- D7 V2.0 Smart Diagnostic Tablet
- VGA Main Cable
- OBD II-16 Connector
- Micro USB Cable
- Charger for Tablet
- EU Charger Adapter
- US Charger Adapter
- User Manual (this document)
4. Product Overview
The XTOOL D7 is a powerful diagnostic tool with enhanced hardware and software, offering a comprehensive solution for vehicle diagnostics. Key features include:
- 3 Years Free Update
- All System Diagnostic
- ECU Coding & ECU Code
- Active Test/Bi-Directional Controls
- CAN FD & DOIP Protocol
- Key Programming
- 8 in 1 Live Data Graph
- FCA Auto Auth
- Full OBDII Functions
- Auto VIN & Auto Scan
- 7-inch Screen, Android 10.0, 2+64GB RAM+ROM, HD Display (1024x600), 2500mAh 7.3V (5000mAh 3.7V) Battery
5. Setup and Installation
5.1. Connecting the Emulator
The emulator is used to collect data and emulate key data. It connects to the XTOOL D7 tablet via a USB 3.0 port. If your XTOOL tablet has a Type-C port, use a USB3.0 to Type-C adapter.
- Antenna: Used to collect data and emulate key data.
- Light: When connected, the green light will be turned on. When collecting data, the green light will flicker, then goes off once it is done collecting.
- USB 3.0 Port: Used to connect to the XTOOL devices. When using XTOOL tablets with Type-C ports, please connect the USB3.0 to Type-C adapter before use.
5.2. Initial Device Setup
Upon first use or after a major update, ensure the device is connected to the internet for activation and software downloads. Follow the on-screen prompts to activate the device using your email address and serial number.
6. Operating Instructions
6.1. Data Collection from Start/Stop Button
- Connect the emulator to the tablet and start the process.
- When the notice pops up from the tablet, put the antenna close to the vehicle's start button.
- The light on the emulator will flicker when collecting data and go off once collection is finished.
6.2. Data Collection / Emergency Start from Low-Frequency Antenna
The low-frequency antenna is typically located at:
- At the front, beneath the armrest storage area.
- In the middle, under the backseats.
- Door handle (for models with keyless entry).
- Connect the emulator to the tablet and start the process.
- When the notice pops up from the tablet, put the antenna close to the low-frequency antenna.
- The light will flicker when collecting and go off once collection is finished.
- After collecting data, put the emulator close to the antenna and press the start button to perform an emergency start.
6.3. Full System Diagnostics
The XTOOL D7 can scan all available electronic systems of a car to identify and troubleshoot issues. This includes reading/clearing codes, viewing ECU information, live data, active tests, and special functions for systems like ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.
Video 2: Automatic Scan Demonstration
6.4. ECU Coding
The ECU coding function allows you to reprogram adaptive data of certain components after replacement to enhance vehicle performance. It can also refresh hidden functions to customize car settings and disable annoying features. This function is available for specific vehicle brands like BMW, Mercedes-Benz, VW, Audi, Skoda, and Mitsubishi.
6.5. Bi-Directional Control (Active Test)
The XTOOL D7 allows you to perform active tests on car subsystems, enabling you to check the working status and functionality of components like solenoids and injectors. This helps in quick troubleshooting and fixes, significantly improving efficiency.
Video 3: Actuation Test Demonstration
6.6. Special Functions (Maintenance Services)
The D7 supports over 36 frequently used maintenance functions for daily car upkeep and repairs. These include:
- Oil Reset
- EPB Reset
- BMS Reset
- DPF Regeneration
- Key Programming
- Injector Coding
- ABS Bleeding
- SAS Adjustment
- Throttle Relearn
- Airbag Repair
- TPMS Reset, Air Suspension, Gear Learning (Crankshaft Relearn), Gearbox Match, Headlight Adjustment, Window Initialization, Seat Configurations, Disable Transportation, Tire Upgrade, Electronic Pump Activation, Power Balance, A/F Reset, Start/Stop Reset, Language Change, Reset Control Unit, Rain/Light Sensor, A/C Relearn, HV Battery, VGT Relearn, FRM Reset, SRS, Clutch Adaptation, Speed Limit.
Video 4: Special Function - Throttle Matching Demonstration
6.7. Key Programming
The IMMO service allows you to disable lost vehicle keys and program replacement key fobs. This includes programming new key fobs, reading PIN codes, generating keys, adding keys, and handling all key lost scenarios.
6.8. Full 10 OBD2/EOBD Functions
The XTOOL D7 provides comprehensive OBD2/EOBD functions to diagnose emission-related issues:
- Read Trouble Codes (DTCs)
- Clear Trouble Codes (Turns off Check Engine Light)
- Live Data Stream
- Read Freeze Frame
- Read ECU Information
- Component Test
- On-Board Monitor Test
- O2 Sensor Monitoring Test
- I/M Readiness
- Read Vehicle Information (VIN, CID, CVN)
6.9. Live Data Stream
The device can read, graph, and combine up to 8 independent streams of sensor data in real-time. Data can be exported to a CSV file for storage, comparison, and later analysis of graphical changes and textual readouts.
Video 5: Live Data Stream Demonstration
6.10. Auto VIN
The D7 can automatically retrieve the vehicle identification number (VIN) for a comprehensive scan of all available systems. For vehicles not supporting Auto VIN, manual input or selection of the vehicle model is possible.
6.11. Diagnostic Report 2.0
Generate a full system Diagnostic Report with one click. Reports can be emailed or printed, and customized with your name and address. This allows mechanics to provide clear documentation of vehicle issues to customers.
Video 6: Diagnostic Report Generation
6.12. FCA AutoAuth & CAN FD & DOIP
The XTOOL D7 supports SGW gateway access via registered AutoAuth for 2018 and later FCA-SGW vehicles (Chrysler, Dodge, Jeep, etc.) to perform diagnostics and advanced functions. It also supports CAN FD Protocol for GM 2020+ models and DoIP for BMW, Mercedes-Benz, and Land Rover 2018+ vehicles, ensuring fast and stable communication without additional adapters.
6.13. AI-Assisted Feature
The newly added AI-Assisted feature automates car diagnostics by swiftly identifying common faults, interpreting DTCs and live data, and offering step-by-step repair guidance. It supports real-time health monitoring, predictive maintenance alerts, and generates detailed reports, simplifying complex issues for all users.
7. Maintenance
7.1. Software Updates
The XTOOL D7 comes with 3 years of free software updates. Connect the device to the internet and use the one-click update feature to download the latest models and functions. Even after the free update period expires, previously downloaded software can be used normally.
7.2. Cleaning and Storage
Keep the device clean and free from dust and moisture. Store it in its carrying case when not in use to protect it from damage. Avoid exposing the device to direct sunlight or extreme temperatures.
8. Troubleshooting
If you encounter issues with your XTOOL D7, consider the following:
- Device Not Working: Ensure all cables are securely connected. Check the device's battery level. If the device is new, ensure all necessary software and vehicle functions have been downloaded and updated.
- Communication Issues: Verify the OBDII connector is properly seated in the vehicle's port. Ensure the vehicle's ignition is on. If using an emulator, check its connection and indicator light.
- Difficulty Navigating Menus: The touch screen interface can have many subcategories. Take your time to carefully select the correct options. Refer to the relevant sections of this manual or the PDF manual for guidance.
- Software Errors: Perform a software update to ensure you have the latest version. If issues persist, contact technical support.
9. Specifications
| Attribute | Value |
|---|---|
| Operating System | Android 10.0 O.S. |
| Display | 7.0 inch 1024 X 600 resolution |
| Battery | 5000mAh, 3.7V |
| Memory | 2GB RAM + 64GB ROM |
| Power Consumption | 8W |
| Power Voltage | 5V |
| Processor | Quad-core 1.6GHz Processor |
| Connectivity | Micro USB + WIFI (2.4Ghz & 5Ghz) |
| Dimensions (L*W*H) | 218*150*29mm |
| Sensors | Gravity sensor, light sensor |
| Item Weight | 0.2kg |
| Item Height | 4inch |
| Item Width | 8inch |
| Item Length | 10inch |
| External Testing Certification | CE |
| Material | Plastic |
| Is Batteries Included | Yes |
9.1. Supported Vehicles (Partial List)
The XTOOL D7 supports over 88 brands and 10,000 vehicles. Below is a partial list of supported Toyota and Lexus models for smart key data collection:
| Model | Model Year | Chip Type | PCB Number |
|---|---|---|---|
| TOYOTA | |||
| Alphard | 2017.1+ | 8A-85 | 0120 |
| Avalon | 2019.1+ | 8A-88 | 0410 |
| Camry | 2018.1+ | 8A-88 | 0410 |
| Camry | 2018-2021 | 8A-85 | 0351 |
| Corolla | 2019-2021 | 4A | 2000 |
| C-HR | 2018.1+ | 8A-88 | 0410 |
| C-HR (US) | 2018-2021 | 8A-85 | 0010 |
| Crown | 2018.1+ | 8A-82 | 2110 |
| Highlander | 2018.1+ | 8A-82 | 2110 |
| Land Cruiser | 2018-2019 | 8A-82 | 2110 |
| Land Cruiser | 2020-2021 | 8A-85 | 0010 |
| Land Cruiser Prado | 2018.1+ | 8A-82 | 3330 |
| Levin | 2019-2021 | 4A | 2000 |
| Prius | 2018.1+ | 8A-88 | 0410 |
| Prius | 2016-2021 | 8A-85 | 0351 |
| RAV4 | 2019.7+ | 8A-88 | 0410 |
| RAV4 | 2019-2020 | 8A-85 | 0351 |
| Vellfire | 2017.1+ | 8A-85 | 0120 |
| Wildlander | 2019.1+ | 8A-88 | 0410 |
| LEXUS | |||
| ES | 2018.1+ | 8A-88 | 0440 |
| GS | 2018.1+ | 8A-88 | 0440 |
| IS | 2017.1+ | 8A-82 | 2020 |
| LS | 2018.1+ | 8A-88 | 0440 |
| NX | 2018.1+ | 8A-82 | 2110 |
| RX | 2018.1+ | 8A-85 | 0010 |
| UX | 2018.1+ | 8A-88 | 0440 |
| GS | 2018.1+ | 8A-88 | 0440 |
Note: The chip information shown on the list may vary in different markets or models. The list is for reference only. For a complete and up-to-date list of supported vehicles, please visit the official XTOOL website or contact support.
10. User Tips
- Initial Setup: Always download all available vehicle software and functions after receiving the device to ensure full functionality.
- Diagnostic Reports: The Diagnostic Trouble Codes (DTCs) are clear and can be generated into a complete report, which is useful for sharing with clients or for personal records.
- Navigation: The touch screen interface can have many subcategories. Navigate carefully to avoid getting lost in the menus.
- Quality: The XTOOL D7 and its accessories, including cables and connectors, are noted for their original quality and robust build.
11. Frequently Asked Questions (FAQ)
- Q: Can I purchase replacement cables and connectors?
- A: Yes, replacement cables and connectors are available. Please contact XTOOL support for purchasing options.
- Q: Is this device compatible with XTOOL X100 Pad 3?
- A: Compatibility with other XTOOL devices may vary depending on the specific function. Please refer to the product specifications or contact XTOOL support for detailed compatibility information.
12. Warranty and Support
XTOOL provides a 2-year warranty and lifetime technical support for the D7 diagnostic tool. For any after-sales services or technical assistance, please contact:
- Official Website: http://www.xtooltech.com
- After-sales Support Email: supporting@xtooltech.com
- Corporate & Business Inquiries: marketing@xtooltech.com
A detailed user manual in PDF format is available for download: XTOOL D7 User Manual (PDF).