1. Introduction
The Douk Audio P6-MINI is a versatile HiFi tube preamplifier designed to enhance your audio experience. It features Bluetooth 5.0, USB (U-disk) playback, and Stereo RCA inputs, allowing connection to various audio sources. With independent treble and bass controls, and a replaceable tube design, it offers a warm, rich sound and customization options for audiophiles.
2. Key Features
- Multiple Audio Inputs: Supports Bluetooth 5.0, USB (U-disk), and Stereo RCA connections, compatible with phones, TVs, tablets, projectors, computers, and more.
- U-disk Playback: Supports APE, FLAC, WAV, WMA lossless formats, in addition to MP3, for high-quality audio directly from a U-disk.
- HIFI Warm Sound & Replaceable Tube Design: Features default 6K4 tubes to soften digital audio, providing a warmer, sweeter, and mellow sound. The pluggable tube design allows for upgrades to compatible tubes like 6*1N, JAN5725W, 6AK5, or EF95 to explore different sound styles.
- Separate Tone Control & Input Switch: Includes independent treble and bass knobs for precise sound adjustment, alongside a main volume control. An input selector switch with an LED indicator simplifies switching between audio sources.
- Compact Size & Attractive Appearance: Housed in a CNC machined black aluminum alloy chassis, offering durability and a sleek design. The vintage tube's warm orange light adds to its aesthetic appeal, making it suitable for various desktop setups.
3. Package Contents
Please check the package for the following items:
- 1x P6-MINI Preamp
- 2x 6K4 Vacuum Tubes
- 1x DC 12V Power Adapter
- 1x Bluetooth Antenna
- 1x User Manual (This document)

4. Product Overview







5. Setup Instructions
- Insert Vacuum Tubes: Carefully insert the vacuum tubes into the sockets on the P6-MINI. Ensure the pins of the tubes are not deformed before insertion.
- Connect Output: Connect your active speakers or an amplifier to the RCA output jacks on the rear panel of the P6-MINI.
- Connect Audio Source (Wired):
- For RCA input: Connect your audio source (e.g., CD player, TV) to the RCA input jacks on the rear panel using an RCA cable.
- For U-disk input: Insert a U-disk into the USB socket located on the top of the P6-MINI.
- Connect Power: Connect the provided 12V power adapter to the P6-MINI, then plug the power cable into a wall socket.
- Power On: Toggle the input switch from the 'OFF' position to 'RCA' or 'USB/BT' position.
- Connect Audio Source (Wireless - Bluetooth):
- Toggle the input switch to the 'BT' position. The blue indicator light will flash.
- On your phone or tablet, turn on Bluetooth, search for "BT HIFI AUDIO" (or similar, refer to product-specific manual if different), and connect. The blue indicator will become steady after a successful connection.
6. Operating Instructions
- Input Selection: Use the input switch on the front panel to select your desired audio source (Bluetooth, U-disk, or RCA). Note that U-disk input has priority; if a U-disk is inserted, Bluetooth will automatically disconnect and the unit will switch to U-disk mode.
- Playback Control (U-disk/Bluetooth): Use the 'Previous song', 'Play/Pause', and 'Next song' buttons on the front panel to control media playback.
- Volume Adjustment: Rotate the 'VOL' knob to adjust the main output volume to your preference.
- Tone Control: Use the 'BASS' and 'TRE' (Treble) knobs to fine-tune the low and high frequencies of the audio output. Adjust these according to your music style, connected devices, and personal listening preferences.
- Enjoy Music: Once your audio source is playing and settings are adjusted, enjoy the enhanced sound quality.
- Power Off Sequence: When finished, first toggle the power switch to the 'OFF' position, then disconnect the power adapter from the wall socket. This helps prevent impact sounds that could damage connected equipment.
7. Maintenance
7.1 Tube Replacement
- Power Off Before Replacement: Always turn off the P6-MINI and disconnect the power adapter before replacing vacuum tubes. The internal circuitry operates at high voltage, and attempting to replace tubes while powered on can cause damage to the unit or the tubes.
- Compatible Tubes: The default 6K4 tubes can be replaced with compatible models such as 6*1N, JAN5725W, 6AK5, EF95, 6J1, 6J2, 6J3, 6J4, 6J5, 5654/5654W, 5725, 6BA6, 403B, etc. Ensure the replacement tubes are compatible to avoid damage.
- Op-Amp Replacement: Commonly used replaceable op-amps include 2604/2134/Muse02 (dual op-amps are generally available). Different op-amps will produce different sound effects.
7.2 General Care
- Environmental Considerations: Vacuum tubes are sensitive components. Keep the P6-MINI away from RF interference, electromagnetic interference sources, and areas prone to vibration.
- Ventilation: Tubes generate heat during operation. Ensure the unit is placed in a well-ventilated area to allow for proper heat dissipation.
- Power Supply: Use only the original or a certified 12V power adapter. Using an incorrect power supply can damage the unit. Do not exceed 12V.
- Avoid High Temperature/Humidity: Do not place the P6-MINI in high-temperature or humid environments.
8. Troubleshooting
- No Sound:
- Check the P6-MINI's input indicator. If it's not lit, try another 12V power supply.
- If the indicator is on but no sound, verify the audio signal transmission chain: audio source > audio cable > preamp/decoder > amplifier > speaker.
- Ensure the audio source is not muted, paused, or set to a very low volume.
- Confirm the correct input mode is selected on the P6-MINI.
- Distorted Sound:
- The input amplitude might be too high. If both the audio source and P6-MINI volumes are maxed out, distortion can occur.
- Reduce the volume of either the audio source or the P6-MINI. A common practice is to set the amplifier volume to about 60% and then fine-tune the preamp volume.
- Loud Current Sound or Buzzing Noise:
- Use the original power supply. Many aftermarket power supplies can introduce interference.
- Ensure you are using shielded signal cables. Unshielded cables can pick up interference.
- To identify the source, disconnect all inputs, leaving only the power supply and power cable connected. If the noise disappears, it's from an audio input. If it persists, it may be the power supply or an internal issue with the P6-MINI.
- Thumping Sound When Switching On/Off:
- Follow the correct power-on sequence: Audio Source > Preamp/DAC > Amplifier > Speaker.
- Follow the correct power-off sequence (reversed): Speaker > Amplifier > Preamp/DAC > Audio Source. Turning off the preamp before the amplifier can cause impact sounds due to capacitor discharge, potentially damaging the amplifier or speakers.
- Bluetooth Cannot Be Searched / Disconnects / Background Noise:
- Ensure the input switch is set to 'BT' mode and the blue indicator is flashing.
- Verify the Bluetooth antenna is correctly installed.
- Check for interference from other wireless devices (e.g., Wi-Fi routers, cordless phones, FM radios) or inductive loads (fans, refrigerators).
- Ensure the Bluetooth device is within range (typically up to 15 meters) and not blocked by obstacles.
- If connecting to a PC, ensure your computer has Bluetooth functionality, updated drivers, and the P6-MINI is selected as the output device.
- U-disk Playback Issues (No Output / Laggy):
- Confirm the U-disk format is FAT32 and its capacity is within 64GB.
- Ensure music files are in supported formats (MP3, APE, FLAC, WAV, WMA).
- Place music files directly in the root directory of the U-disk; avoid creating new folders or including unsupported file types.
- Faint Sound Without Tubes:
- The preamp requires tubes for proper amplification. Other components may still produce weak signal coupling, but for intended operation, tubes must be correctly installed.
- Tube Warm-up Time:
- Unlike transistors, vacuum tubes need a warm-up period to reach optimal performance. It is generally recommended to warm up the unit for about 15 minutes before critical listening.
9. Specifications
| Parameter | Value |
|---|---|
| Audio Input | Bluetooth 5.0 / USB (U-disk) / Stereo RCA |
| Audio Output | Stereo RCA |
| Max U-disk Capacity | 64GB (FAT32 format) |
| Highest U-disk Sampling Rate | 24Bit/192K |
| U-disk Supported Formats | MP3 / APE / FLAC / WAV / WMA |
| Treble / Bass Range | ±6dB |
| Frequency Response | 20Hz-20kHz (±1dB) |
| Distortion (THD) | ≤0.03% (1kHz) |
| RCA Input Sensitivity | 0dBFS/1V |
| Signal-to-Noise Ratio (SNR) | ≥100dB |
| Working Voltage | DC 12V/1.5A |
| Dimensions (W*D*H) | 97*118*33mm (3.82*4.65*1.30in) |
| Net Weight | 337g / 0.74lb |
| Package Dimensions (W*D*H) | 250*215*65mm (9.84*8.46*2.56in) |
| Package Weight | 700g / 1.54lb |
10. User Tips
- Tube Rolling: Consider upgrading the default 6K4 tubes to compatible models like 6AK5 or EF95 to experiment with different sound characteristics and enhance your audio experience.
- Amplifier Pairing: The P6-MINI can be effectively paired with Class D amplifiers to introduce a warm, rich tube sound to your setup.
- Turntable Connection: If connecting a vinyl turntable, an external phono preamp is required before connecting to the P6-MINI's RCA input, as the P6-MINI is a line-level preamp and does not provide RIAA equalization.
- Bluetooth Optimization: For optimal Bluetooth performance, ensure the antenna is securely attached and minimize potential interference from other wireless devices.
11. Warranty and Support
For further assistance or inquiries, please use the following contact information:
- Website: www.doukaudio.com
- Email: nobsound@doukaudio.com
- WeChat/Whatsapp: +86-17704028602
- Address: Room 1329, Wang Cheng Building, Long Guan East Road, Long Hua District, Shen Zhen, Guang Dong, China, 518000
A detailed user manual in PDF format may also be available for download from the official website or via the provided link: User Manual (PDF).
Warning: Please do not open the shell yourself, as improper operation may cause a risk of electric shock. Use only the regular manufacturer's switching power supply. Do not change vacuum tubes at will without confirming compatibility, as this may damage the tubes or the P6-MINI. Avoid placing the unit in high temperature or humid environments. The default power adapter is 12V; exceeding this voltage will damage the P6-MINI.