PaiPaitek PD 529V

Contents

PaiPaitek PD 529 Dog Training Collar User Manual

Model: PD 529V

Introduction

Thank you for purchasing the remote dog training collar PD 529. This product has been tested to meet stringent quality standards and is covered by a 12-month warranty from the date of purchase. For any issues, please contact us with your order ID.

Training collars are designed as tools to train dogs, not for punishment. When used properly and with care, this collar can be a safe and effective tool to build communication and strengthen the bond with your pet. Always follow all safety messages to prevent possible injury. Do not use this product if your dog has heart disease, high blood pressure, cerebral thrombosis, or skin allergies.

A happy dog wearing the training collar, with the remote control next to it.
The PaiPaitek PD 529 Dog Training Collar and Remote

Package Contents

The package includes the following items:

Contents of the dog training collar package, including remote, receiver, collar, charging cable, and manual.
Typical package contents for the dog training collar system.

PD 529-1 (For 1 dog)

  • 1 x Remote Transmitter
  • 1 x Receiver
  • 1 x Collar Strap
  • 2 x Long Contact Points
  • 1 x USB Charging Cable
  • 2 x Short Contact Points
  • 2 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 2 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 2 x Anti-Shock Pads
  • 1 x Lanyard

PD 529-2 (For 2 dogs)

  • 1 x Remote Transmitter
  • 2 x Receivers
  • 2 x Collar Straps
  • 4 x Long Contact Points
  • 1 x USB Charging Cable
  • 4 x Short Contact Points
  • 4 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 4 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 4 x Anti-Shock Pads
  • 1 x Lanyard

PD 529-3 (For 3 dogs)

  • 1 x Remote Transmitter
  • 3 x Receivers
  • 3 x Collar Straps
  • 6 x Long Contact Points
  • 1 x USB Charging Cable
  • 6 x Short Contact Points
  • 6 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 6 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 6 x Anti-Shock Pads
  • 1 x Lanyard

Setup

Charging the Devices

Before first use, charge both the remote transmitter and receiver for at least 2 hours. The collar cannot receive signals while charging.

Diagram showing USB charging for both the remote and receiver collar.
USB Charging for Remote and Receiver

How to Choose a USB Charger

Use a USB charger with the following parameters:

  • Input: 100-240V ~ 50-60Hz
  • Output: 5V 1000mA (or 300mA/500mA)

You can use a smartphone charger or a laptop/computer USB interface.

Charging the Remote Transmitter

  1. Connect the charging cable to the charging port on the remote.
  2. Plug the charger into a standard socket.
  3. The battery icon will flash during charging and become solid when fully charged.

Charging the Receiver

  1. Remove the rubber cover and connect the receiver to a charger.
  2. The red indicator light will flash slowly during charging and remain on when fully charged.

Wearing the Receiver Collar Correctly

Proper wearing ensures effective training and your dog's health.

  1. The receiver should be placed at the bottom of the dog's neck.
  2. The screw caps (contact points) must make direct contact with the dog's skin.
  3. If your dog has thick hair, use longer screw caps.
  4. Anti-shock pads can prevent skin abrasion. It is recommended to use them 2-3 times a week.
  5. Maintain a finger's distance between the receiver collar and the dog's neck. If it's too loose, static shock effectiveness will be reduced.
  6. The extra part of the strap can be trimmed or handled by other methods.
Close-up of the receiver collar showing 'No Shock' and dimensions.
Receiver Collar Design (No Prongs)
Chart showing suitable dog breeds and sizes for the collar, ranging from 8lbs to 130lbs.
Collar suitability for various dog sizes (8lbs to 130lbs, up to 27 inches).

Pairing the Remote Transmitter and Receiver

  1. Turn on the remote transmitter. Press the CH button to select the desired signal channel (1, 2, or 3).
  2. Hold the power button on the receiver for 2 seconds until the indicator light flashes.
  3. Within 10 seconds, press any function button (beep, vibration, or static shock) on the remote transmitter to pair.
  4. If pairing fails, repeat the process.

For multiple receivers, you can choose the same signal channel or different channels for each receiver.

Operation

Turning the Receiver On and Off

  • Turn On: Press the power button once. The receiver will emit a short "beep" sound, indicating it's on.
  • Turn Off: Press the power button once. The receiver will emit a long "beep" sound, and the indicator light will stop flashing.

Checking Receiver Power

When the receiver is on, quickly press the power button twice to check the power:

  • 5 beeps: 100% (80-100%)
  • 4 beeps: 80% (60-80%)
  • 3 beeps: 60% (40-60%)
  • 2 beeps: 40% (20-40%)
  • 1 beep: 20% (1-20%)

Remote Control Buttons

The remote control features several buttons for different functions:

  1. Signal Channel Button (CH): Press to select channel 1, 2, or 3 for dog training.
  2. Power Button/Keylock: Press to turn the remote transmitter on and off.
  3. Static Shock Button: Activates a mild static shock on the receiver.
  4. Vibration Button: Activates vibration on the receiver.
  5. Tone Button: Activates a beep sound on the receiver. The tone function is not adjustable.
  6. LED Light Button: Activates the LED light on the remote.
  7. LED Light: Indicator light.
  8. +/- Button: Adjusts the vibration and static shock levels (1-100 levels).
  9. Charging Port: For connecting the USB charging cable.

Reinforcing Learning Behaviors

If your dog understands a command but responds inconsistently, the training collar can help sharpen their skills. For example, to teach your dog to come when called:

  1. Set the collar to an initial stimulation level and test it.
  2. Fit the collar on your dog's neck alongside their regular collar.
  3. Allow your dog to roam. Give the command and simultaneously press the stimulation button.
  4. If your dog moves towards you, stop stimulation and praise them.
  5. If your dog stops or turns away, repeat the command and continue stimulation. Stop immediately when they respond and reward them with praise or a treat.
  6. Repeat this process 3-4 times.

This method can be applied to stopping unwanted behaviors and reinforcing desired learning behaviors in nearly every training scenario.

A dog running in a field with a remote control in the foreground, illustrating a remote range of up to 2800FT.
Remote Range for Training (up to 1000 meters / 3300 feet)

Product Overview Video

This video provides a visual overview of the dog training collar, its components, and basic usage.

Maintenance

  1. Regularly inspect the receiver for tightness and any external damage.
  2. Clean the screw caps with alcohol weekly.
  3. Examine your dog's neck and clean it weekly.
  4. The battery is rechargeable. To maintain battery life, charge it every 2 months if not often used.

Troubleshooting (FAQ)

Q: How old must my dog be to use the training collar?
A: Do not use on puppies younger than 6 months.
Q: Can I use the dog training collar for more than one dog?
A: Yes, you can add one or two receivers to the system to control two or three dogs, as three dog channels are available with one remote transmitter.
Q: What should I do if my dog's neck becomes red and irritated?
A: Stop using the dog training collar for a few days. If the condition persists beyond 48 hours, please consult your veterinarian. Continue to monitor your dog's skin condition closely even if the skin becomes normal.
Q: Can I attach a leash to the receiver?
A: No. This will pull the screw caps (contact points) too tightly against your dog's neck. Use a separate collar placed above the receiver.
Q: How do I know when to charge the battery?
A: For the Remote Transmitter, the battery level icon is displayed on the left side of the LCD screen. For the Receiver, quickly press the power button twice; if only one beep is emitted, charge it.
Q: How long can I leave the receiver on my dog?
A: The receiver is not designed to be worn constantly. We recommend wearing the receiver on your dog for less than 18 hours per day.
Q: How long should a training session be?
A: Training sessions should be positive and short, ideally about 10-15 minutes each time.
Q: What are the proper levels of static shock for my dog?
A: Start from the lowest level and gradually increase to find the most suitable level for your dog. Excessive stimulation should be avoided.
Q: What is the effective distance of my dog training collar?
A: Without obstacles, the effective distance can be up to 1000 meters (3300 feet). However, factors like telecom signal stations, magnetic fields, obstacles, battery volume, other wireless devices, land form, and vegetative cover can influence the actual effective distance.
Q: Once my dog is trained, is it still necessary for them to wear the receiver?
A: Yes, you may need to reinforce your dog's memory with the receiver from time to time.
Q: Are there other training methods?
A: You can use dog food as an incentive. After correcting misbehavior, clearly communicate what is expected. With repetition, your dog will learn desired behaviors.
Q: I want to test the static shock function myself, but it doesn't work. What's wrong?
A: If you test the receiver collar by hand or leg, you must touch both screw caps (contact points) simultaneously. Touching only one will not work.
Q: The dog training collar does not work, or my dog does not respond after correct installation. How should I solve this problem?
  1. Ensure both remote transmitter and receiver collar have sufficient battery power.
  2. Check if the receiver collar is turned on.
  3. Verify that the signal channel button on the remote transmitter is correctly configured.
  4. Try to pair the remote transmitter and receiver again.
  5. Remove the receiver collar and test all three functions (beep, vibration, static shock) to ensure they work properly.
  6. Ensure the receiver collar is properly worn and not loose.
  7. Trim your dog's hair where the screw caps (contact points) can touch the neck.

Specifications

FeatureDescription
ModelPD 529
FunctionTraining Dogs
Working ModesBeep, Vibration, Static Shock
Vibration and Static Shock Levels1-100 Levels
Net WeightRemote Transmitter: 50g, Receiver: 45g
Channels3 Channels
Remote Range1000m/3300ft/1100yds
Battery CapacityRemote Transmitter: 300mAh, Receiver: 650mAh
Working TimeRemote Transmitter: 180 days, Receiver: 25-40 days
Waterproof LevelRemote Transmitter: IPX3, Receiver: IPX7
MaterialPlastic
Battery IncludedYes
Target PetDog (Small, Medium, Large Sized Dogs)
Battery TypeRechargeable Li-on Battery
Battery Life450 Charge Cycles
Charge Time3 Hours

User Tips

  • **Consistency is Key:** When training, always be consistent with commands and corrections. Your dog learns best through clear, repeated associations.
  • **Positive Reinforcement:** Always pair corrections with positive reinforcement when your dog performs the desired action. Treats and praise are highly effective.
  • **Short Training Sessions:** Keep training sessions brief, around 10-15 minutes, to maintain your dog's focus and prevent fatigue.
  • **Monitor Skin Health:** Regularly check your dog's neck for any signs of irritation from the collar. If irritation occurs, remove the collar and consult a veterinarian if it persists.
  • **Avoid Over-Correction:** Start with the lowest effective stimulation level and only increase if necessary. The goal is to get your dog's attention, not to cause distress.
  • **Water Safety:** If your dog is swimming, ensure the charging rubber cap is tightly closed. For prolonged water exposure, it's recommended to remove the receiver.

Warranty and Support

This product comes with a 12-month warranty from the date of its original purchase. The warranty is void if defects are caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or failure to follow operating instructions. It does not cover normal wear and tear or commercial use.

Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.

If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day to advise you on how to correct the problem or how to return the defective unit for repair or replacement.

For a more detailed user manual, you can refer to the official PDF document available at: PaiPaitek PD 529 User Manual (PDF).

© 2023 PaiPaitek. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.