CCXTMT 50cc 70cc 90cc 110cc 125cc 140cc 150cc 160cc 170cc to 200cc 250ccPit D

Contents

CCXTMT Motorcycle Front and Rear Brake Pads User Manual

Model Compatibility: 50cc - 250cc Pit Dirt Bikes, ATVs, Quads, Motocross, Scooters

1. Product Overview

This series of motorcycle modification parts, including these brake pads, is developed by the brand CCXTMT, a professional manufacturer specializing in motorcycle accessories. Designed for users seeking to replace original factory parts, upgrade performance, and enhance riding comfort, these brake pads are precision-manufactured using high-strength and wear-resistant materials. They undergo rigorous bench tests and road validations to ensure superior adaptability, stability, and safety. These parts directly replace corresponding original factory brake components, providing enhanced functionality and a more comfortable riding experience for daily commuting, mountain riding, and light competition scenarios.

Set of CCXTMT Motorcycle Front and Rear Brake Pads

Figure 1: Complete set of CCXTMT Motorcycle Front and Rear Brake Pads.

2. Specifications

2.1 General Specifications

  • Material: Metal & Brass Alloys (Ceramic/semi-metallic composite material)
  • Origin: Mainland China
  • High Temperature Resistant: Yes
  • Position: Front & Rear
  • Adaptability Principle: 1:1 matching with original factory part mounting positions; direct replacement without additional drilling, welding, or body structure modification.
  • Interface Standard: Fully compatible with original factory part connection standards.
  • Installation Compatibility: Does not affect the functionality of other original vehicle systems (electrical, cooling, fuel).
  • Material Standard: Complies with motor vehicle component safety standards; strength, temperature resistance, and corrosion resistance are superior or equivalent to original factory parts.

2.2 Braking System Specifics

  • Brake Pad Material: Ceramic/semi-metallic composite material (superior friction performance and heat resistance).
  • Friction Coefficient: 0.45-0.6
  • Operating Temperature Range: -30°C to 600°C
  • Service Life: 20%-30% longer than original factory parts.
  • Installation Adaptability: Fully consistent with original factory parts for direct replacement.

2.3 Dimensions

PartLengthHeightThickness
Front Brake Pad (A)77mm42mm9mm
Rear Brake Pad (B)45mm41mm6.8mm
Front Brake Pad Dimensions

Figure 2: Front Brake Pad Dimensions.

Rear Brake Pad Dimensions

Figure 3: Rear Brake Pad Dimensions.

3. Setup (Installation Requirements)

Installation must be performed by professional personnel with motorcycle maintenance experience or at a professional repair shop.

  1. Compatibility Check: Before installation, carefully check whether the CCXTMT brake pad model is compatible with your motorcycle model. Confirm that the part is free of damage or deformation, and that accompanying accessories (if any) are complete.
  2. Disassembly: Follow the original factory part disassembly specifications to remove old parts to avoid damaging the vehicle body or new modification parts due to improper operation.
  3. Tools and Torque: Use appropriately sized sockets, wrenches, and other tools. Ensure that the bolt tightening torque meets requirements (refer to your motorcycle's service manual for specific torque values) to prevent part damage caused by loosening or over-tightening. After replacement, the connection strength must not be lower than the original factory standard.
  4. Brake Bleeding: After installing braking system modification parts, repeatedly step on the brake pedal to bleed air from the brake pipeline.
  5. Functionality Check: Check whether the brake sensitivity and braking force are normal (must meet or exceed the original factory braking effect) and confirm no leakage before riding.
  6. Final Inspection: After installation, fully inspect all connection parts for tightness and check for interference between the modification part and other vehicle components. Ensure there are no potential safety hazards and that the normal functionality of other vehicle systems is not affected.

4. Operating (Function and Comfort Enhancement)

High-performance braking system modification parts replace original factory braking accessories, enhancing brake friction performance and shortening braking distance by 10%-15% compared to original factory parts. They improve brake response speed and continuous braking stability, avoiding issues such as rapid thermal attenuation and insufficient braking force often found with original factory brake pads. This results in safer and more comfortable riding with smoother operation.

5. Maintenance

  1. Break-in Period: After replacing original factory parts with new CCXTMT brake pads, it is recommended to conduct a 500km break-in ride. During this period, avoid aggressive driving behaviors such as sudden acceleration, sudden braking, and prolonged high-speed driving to allow full adaptation between the modification parts and the vehicle, ensuring subsequent stability and comfort.
  2. Environmental Care: During daily riding, avoid driving through deep water or muddy roads to prevent modification parts from water ingress, debris contamination, corrosion, or malfunction. Avoid colliding or scratching modification parts to keep them intact and maintain their performance.
  3. Regular Inspection: Regularly inspect the connection parts of each CCXTMT modification part. Tighten loose bolts in a timely manner. Check for excessive wear or leakage in braking system modification parts. Repair or replace damaged parts promptly to ensure their functions remain optimal.
  4. Brake Pad Wear: Regularly inspect the wear of brake pads and brake discs. Replace brake pads promptly when the thickness is less than 3mm or if the brake disc has severe scratches or deformation to ensure braking performance and riding safety.
  5. Corrosive Substances: Keep modification parts away from corrosive substances such as strong acids and alkalis. When cleaning the vehicle, avoid directly flushing the connection parts and seals of modification parts with a high-pressure water gun to prevent corrosion or water ingress and extend their service life.

6. Troubleshooting

If any abnormality is found in CCXTMT brake pads during use (e.g., abnormal noise, leakage, performance degradation, failing to meet the expected effect of replacing original factory parts), immediately stop riding, inspect and eliminate the fault cause before continuing to use.

7. User Tips

  • Always ensure professional installation to guarantee optimal performance and safety.
  • Adhere to the recommended break-in period for new brake pads to maximize their lifespan and effectiveness.
  • Regularly check brake fluid levels and the condition of brake lines in conjunction with pad inspections.

8. Safety Warnings

  1. Legal Compliance: This series of CCXTMT modification parts is only for legal and compliant replacement of corresponding original factory motorcycle parts. Modification must comply with local traffic regulations and shall not exceed the scope permitted by law.
  2. Adaptation Period: After replacing original factory parts with modification parts, the vehicle's performance, handling feel, and comfort will be optimized. Riders need to gradually adapt to avoid safety accidents caused by unfamiliarity with new performance.
  3. Prohibited Actions: Drunk driving, speeding, and other dangerous behaviors are strictly prohibited. Do not arbitrarily modify or disassemble CCXTMT modification parts a second time, as it may cause part damage and performance failure, leading to potential safety hazards and loss of brand warranty service.
  4. Immediate Action for Abnormalities: If any abnormality is found in CCXTMT modification parts during use (e.g., abnormal noise, leakage, performance degradation), immediately stop riding, inspect and eliminate the fault cause before continuing to use.

9. Warranty and Support

If a CCXTMT modification part has quality issues, do not disassemble or repair it yourself. Contact the purchasing merchant or CCXTMT after-sales service in a timely manner and enjoy the brand's independent warranty service with the purchase certificate (refer to the product warranty card for warranty period) to ensure post-replacement usage guarantee.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.