1. Product Overview
The VaneAims CF-10PV DC PV Fuse is designed for the protection of photovoltaic systems. It adheres to the IEC60269 standard and is suitable for high-voltage DC applications.
Product Description
- Brand: VaneAims
- Product Name: DC PV Fuse
- Standard: IEC60269
- Rated Voltage: DC 1000V
- Available Amperage (AMP): 1A, 2A, 3A, 10A, 15A, 20A, 25A, 30A
- Application: Solar Panels, Solar Photovoltaic Systems, DC Strings.
Product Features
- Excellent Manufacture & Exquisite Workmanship: Adopts high-quality materials and precision manufacturing technology, ensuring stable performance and a long service life.
- Easy to Install: Features a standard 10x38mm cylindrical design, compatible with universal fuse holders for simple and fast installation and replacement.
- High Breaking Capacity: Rated breaking capacity up to 20kA, effectively protecting the circuit from overcurrent and short circuit damage.
- PV-specific Design: Specially designed for DC photovoltaic systems, suitable for 1000V DC high-voltage scenarios, meeting the safety requirements of solar power generation systems.
- Wide Application: Suitable for solar panels, photovoltaic combiner boxes, DC string circuits, and other photovoltaic power generation systems.


2. Setup and Installation
Proper installation is crucial for the safe and effective operation of the fuse. Always prioritize safety during installation.
Safety Warning
WARNING: Professional electricians are required for installation and maintenance. Strictly follow electrical safety operation procedures to prevent electric shock accidents.
Installation Steps
- Power Off: Confirm the circuit is completely powered off before beginning any installation work. Verify with appropriate testing equipment.
- Fuse Selection: Select the fuse with the matching rated current (AMP) and voltage (DC 1000V) for your specific photovoltaic system requirements.
- Installation: Install the fuse into its matching fuse holder. Ensure the fuse is seated correctly and makes reliable electrical contact within the holder.
- Verification: After installation, double-check all connections for tightness and proper seating before re-energizing the circuit.

3. Operating Instructions
The VaneAims CF-10PV fuse operates passively by interrupting the circuit when an overcurrent condition occurs. No user interaction is required during normal operation.
Application Guidelines
- This product is exclusively designed for DC 1000V photovoltaic system circuit protection.
- DO NOT use this fuse in AC circuits.
- DO NOT use this fuse in over-voltage or over-current scenarios beyond its specified ratings.
4. Maintenance
Fuses are generally maintenance-free components. However, proper storage and replacement procedures are important.
Storage
Store fuses in a dry, well-ventilated, and cool environment. Avoid exposure to high temperatures, high humidity, and mechanical vibration, which can degrade the fuse's performance or integrity.
Replacement
When a fuse blows (indicating a circuit fault):
- Troubleshoot: First, identify and troubleshoot the underlying circuit fault that caused the fuse to blow. Rectify the fault before replacing the fuse.
- Power Off: Ensure the circuit is completely de-energized before attempting to remove or replace the fuse.
- Replace: Replace the blown fuse with a new fuse of the exact same specification (model, voltage, and amperage).
- DO NOT use fuses with a higher rated current than the original, as this can lead to unsafe conditions and damage to equipment.
5. Troubleshooting
The primary troubleshooting scenario for a fuse is when it blows.
Fuse Blows
If the fuse blows, it indicates an overcurrent condition or a short circuit within the protected photovoltaic system. Follow these steps:
- Isolate the Problem: Identify the specific part of the PV system that caused the overcurrent. This may involve checking wiring, solar panels, inverters, or other components for faults.
- Rectify the Fault: Repair or replace any faulty components or wiring that led to the overcurrent.
- Replace Fuse: Once the fault is resolved, replace the blown fuse with a new one of the identical specifications (CF-10PV, DC 1000V, and the same amperage rating). Refer to the 'Replacement' section under Maintenance for detailed steps.
- Test System: Carefully re-energize the system and monitor its operation to ensure the fault has been resolved and the new fuse holds.
6. Specifications
| Parameter | Specification |
|---|---|
| Product Model | CF-10PV |
| Product Type | gPV DC Fuse |
| Rated Voltage | DC 1000V |
| Rated Current Range | 1A, 2A, 3A, 10A, 15A, 20A, 25A, 30A |
| Rated Breaking Capacity | 20kA |
| Dimension (Diameter × Length) | 10 × 38mm |
| Implementation Standard | IEC 60269 |
| Application Environment | Solar photovoltaic DC system |
| Material | CERAMICS |
| Safety Standards | CSA |
| Certification | CE |
| Use | High Voltage |
Product Dimensions
The VaneAims CF-10PV fuse adopts a standard cylindrical structure:
- Diameter: 10mm
- Total Length: 38mm
- End Cap Length: 10mm

7. User Tips
Based on available user feedback, no specific operational tips were highlighted. Users generally reported that the goods arrived safely and in good condition, and the product matched the description.
8. Warranty and Support
Specific warranty details for the VaneAims CF-10PV Solar DC1000V Ceramic PV Fuse are not provided in this manual or the available product information. For warranty claims, technical support, or further inquiries, please contact the manufacturer or your point of purchase directly.
A user manual in PDF format is available for download: View User Manual (PDF)