Fccemc 120cm Colorful Dynamic LED Trunk Tail Light Strip

Contents

Fccemc 120cm Colorful Dynamic LED Trunk Tail Light Strip

User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Fccemc 120cm Colorful Dynamic LED Trunk Tail Light Strip. This product is designed to enhance vehicle visibility and aesthetics with its dynamic lighting functions, including driving, braking, turning, double flash, and reversing modes. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Warnings

  • Install only on 12V DC vehicle electrical systems. Connecting to a different voltage (e.g., 24V or household power) will cause burnout and fire.
  • Observe polarity (+/-) strictly. Reverse connection will damage the product.
  • Install with proper fuse protection to prevent overcurrent, short circuit, and fire risk.
  • Installation by a qualified electrician is recommended. Improper installation may cause vehicle failure or accident.
  • This product is not E-marked and not for road legal use in all regions; use on public roads at your own risk.
  • Keep out of reach of children.
  • Disconnect the vehicle's power during installation to avoid short circuits.

3. Specifications

Feature Detail
Product Name Car decorative light
Model 1
Item Type Trunk lamp
Voltage 12 V DC
Length 120cm
Material High-quality, bend-resistant
Waterproof Effectively waterproof
Controller Intelligent decoder
Origin Mainland China

Compliance: This product complies with EU RoHS and REACH environmental directives, LVD 2014/35/EU low-voltage electrical regulations, and EMC 2014/30/EU electromagnetic compatibility regulations.

4. Setup and Installation

The installation process is straightforward, but careful attention to wiring and surface preparation is crucial for optimal performance and longevity. Professional installation is recommended.

  1. Prepare the Installation Surface: Clean and thoroughly dry the area on your vehicle's rear trunk where the light strip will be attached. Ensure it is free from dust, grease, and moisture for proper adhesion.
  2. Position the Light Strip: Carefully position the 120cm LED strip along the desired line on your trunk. Ensure it is centered and aligned before removing the adhesive backing.
  3. Secure the Light Strip: Once satisfied with the positioning, remove the adhesive backing and firmly press the light strip onto the prepared surface. Apply even pressure along the entire length to ensure strong adhesion.
  4. Wiring Connection: The light strip comes with a tail box lamp controller and multiple wires for different functions. Refer to the wiring diagram below for correct connections. Disconnect the vehicle's power before making any electrical connections.
    • Red Wire: Connect to positive (+) power supply (ACC V+).
    • Black Wire: Connect to negative (-) power supply (VCC V-).
    • Blue Wire: Connect to Reversing light V+.
    • Green Wire: Connect to Width Lamp V+.
    • White Wire: Connect to Brake V+.
    • Yellow/Left (Y/L) Wire: Connect to Left Turn V+.
    • Yellow/Right (Y/R) Wire: Connect to Right Turn V+.
    Wiring diagram for the Fccemc LED Trunk Tail Light Strip controller
    Figure 1: Wiring connection diagram for the tail box lamp controller.
    Close-up of the LED strip and controller showing wiring
    Figure 2: Product components including the LED strip and intelligent decoder controller.
  5. Fuse Protection: Ensure proper fuse protection is in place for all connections to prevent damage from overcurrents.
  6. Test Functionality: After all connections are made and secured, reconnect the vehicle's power and test all lighting functions (driving, brake, turn signals, double flash, reverse) to ensure they operate correctly.
Comparison of car rear before and after LED strip installation
Figure 3: Visual comparison of a car's rear before and after the LED strip installation.
LED strip being installed on a car's trunk
Figure 4: The LED strip being prepared for installation on the vehicle's trunk.
LED strip adhered to the car's bumper during installation
Figure 5: The LED strip being carefully adhered to the car's rear bumper.

5. Operating Instructions

The Fccemc LED Trunk Tail Light Strip offers various dynamic lighting modes that activate automatically based on your vehicle's signals:

  • Driving Mode: When the vehicle is driving, the strip illuminates in a colorful dynamic pattern or a steady ice blue, depending on the selected SKU.
  • Braking Mode: When the brake pedal is pressed, the entire strip illuminates in a solid red color to indicate braking.
  • Turn Signal Mode (Left/Right): When the left or right turn signal is activated, the corresponding side of the strip will illuminate with an amber sequential flow.
  • Double Flash Mode: When hazard lights are activated, the entire strip will flash amber.
  • Reversing Mode: When the vehicle is put into reverse, the strip illuminates in a bright white light to assist with visibility.
Demonstration of various lighting modes: Magic, Braking, Double Flash, Reverse
Figure 6: Visual representation of the different operating modes.
Driving, Reversing, Brake, and Turning light functions demonstrated
Figure 7: Detailed view of driving, reversing, brake, and turning light functions.
Video 1: Demonstration of the LED strip's various lighting modes, including driving (ice blue and colorful), turn signals, double flash, brake light, and reversing mode.

6. Maintenance

  • Cleaning: Regularly clean the surface of the LED strip with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners that could damage the strip or its waterproof sealing.
  • Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or loose contacts. Ensure the adhesive remains secure.
  • Damage: If the LED strip or its wiring becomes damaged, discontinue use immediately and consult a qualified technician for repair or replacement.

7. Troubleshooting

  • Light strip not illuminating:
    • Check all power connections to ensure they are secure and correctly wired according to the diagram.
    • Verify that the vehicle's 12V DC power supply is active.
    • Inspect the fuse for the circuit; replace if blown.
    • Ensure correct polarity (+/-) for the red and black wires.
  • Specific functions (e.g., turn signals, brake light) not working:
    • Re-check the specific wire connections for that function (e.g., yellow wires for turn signals, white wire for brake).
    • Ensure the vehicle's corresponding signal is active and providing power to the correct wire.
  • LED strip falling off or adhesive failing:
    • Ensure the installation surface was thoroughly cleaned and dried before initial application.
    • For improved adhesion, consider using additional automotive-grade adhesive or mounting tape, especially in extreme weather conditions or if the original adhesive proves insufficient.

8. User Tips

  • Many users appreciate the multi-functionality of this light strip, noting its effectiveness as turn signals, stop light, and reverse light.
  • If you experience issues with the adhesive, consider supplementing it with a stronger, weather-resistant automotive adhesive for a more permanent fix.

9. Warranty and Support

For product support, technical assistance, or warranty inquiries, please contact the manufacturer or their authorized representative:

  • Manufacturer: Guangzhou Zhengji Information Technology Co., Ltd
  • Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
  • Tel: 86-13535102100
  • E-mail: zj634216187@163.com
  • EU Authorized Representative: Apex CE Specialists GmbH, Grafenberger Allee 277, 40237 Dusseldorf, DE
  • EU Support E-mail: Info@apex-ce.com
  • EU Support Tel: +49 21312066043

For a comprehensive overview of item guides and documents, including the user manual in PDF format, please refer to the official product page or contact support. The PDF manual can be found at: User manual (PDF)

© 2023 Fccemc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.