Smartour 5 Inch AHD IPS Monitor User Manual

1. Product Overview

The Smartour 5 Inch AHD IPS Monitor is designed to enhance vehicle safety by providing a clear rear view when reversing. It is composed of a monitor/head unit, a rear camera (sold separately or as part of a kit), and a video cable. The system automatically displays the rear view when the vehicle shifts into reverse gear, aiding in safer parking and maneuvering.

Front view of the Smartour 5-inch AHD IPS monitor with RCA cables connected.

2. Key Features

Automatic Activation: The monitor automatically turns on when the vehicle shifts into reverse gear.
High Definition Display: Supports AHD 720P/AHD 1080P/CVBS signals for high-quality resolution (1920*1080P).
Starlight Night Vision: Enhanced night vision capabilities for clear images in low-light conditions.
Wide Viewing Angle: Features a wide viewing angle (120°-170°) for comprehensive rear coverage.
Durable Design: Waterproof (IP67/IP68) and shockproof construction for reliability in various conditions.
Parking Guide Lines: Includes parking guide lines to assist with distance judgment.
IPS Screen: Provides excellent viewing angles and color reproduction.
Adjustable Bracket: Allows for flexible positioning of the display screen.

Comparison image showing 480P, 720P, and 1080P resolutions on the monitor, highlighting the clarity of 1080P. — Comparison of 480P, 720P, and 1080P resolutions on the monitor, highlighting the clarity of 1080P.

Image demonstrating the adjustable bracket of the monitor, showing its range of motion. — The monitor features an adjustable bracket for optimal viewing angles.

3. Specifications

Feature	Specification
Display Size	5 inches
Resolution	1920*1080P (AHD)
Video Signal Support	AHD / CVBS (all cameras)
Aspect Ratio	16:9
Screen Brightness	500 CD/M2
Screen Contrast	300:1
Screen Type	IPS
Signal Format	PAL / NTSC
Night Vision Features	Automatic gain control, automatic white balance, automatic backlight compensation
Working Voltage	DC 12V
Working Temperature	-20°C ~ +70°C
Power Consumption	<= 6W
Item Weight	350g
Item Size (Monitor)	Approx. 12.6cm (W) x 8.3cm (H)
Certification	CE

Diagram showing the dimensions of the 5-inch monitor: 12.6cm width and 8.3cm height. — Monitor dimensions for installation planning.

4. Setup and Installation

Camera Installation:

Install the camera at the license plate light, trunk handle, or bumper.
Ensure the camera lens is pointed downward and centered for optimal view.
Fix the camera firmly in place to prevent movement.

Wiring:

Connect the Red wire to the reverse light positive (+) terminal.
Connect the Black wire to ground (-) or the reverse light negative (-) terminal.
Connect the Video cable from the camera to the AV IN port on the monitor.
Ensure all wiring is properly insulated and secured to prevent short circuits.

Monitor Installation:

Connect the monitor to your car radio or navigation system.
The monitor is designed to auto-switch to the camera view when reversing.
Use the adhesive tape on the bottom of the monitor stand to secure it to your dashboard or desired surface. Press firmly for a secure fit.

Rear view of the Smartour monitor showing the adjustable bracket and mounting point. — Rear view of the monitor, highlighting the adjustable bracket for flexible positioning.

Image showing the easy installation method of the monitor using adhesive tape on its base. — Secure the monitor to your dashboard using the provided adhesive tape.

5. Operating Instructions

Start your vehicle.
Shift the vehicle's gear to R (Reverse).
The monitor will automatically display the rear view from the camera.
Use the on-screen guide lines to assist in judging distance:
- Near: Indicates a dangerous proximity to objects.
- Middle: Indicates a safe distance.
- Far: Indicates a safer distance.
When you exit reverse gear, the screen will return to its normal display mode.

The Smartour monitor installed on a car dashboard, displaying a clear rear view image. — Monitor displaying the rear view image during operation.

6. Maintenance

Clean the lens regularly: If the camera lens is blocked by rain, snow, or dust, clean it gently to maintain clear visibility.
Inspect wiring: Periodically check all cables for wear and tear. Ensure they are securely connected and insulated to prevent short circuits.
Long-term storage: If the system will not be used for an extended period, disconnect its power supply.

7. Troubleshooting

Problem	Possible Cause / Solution
No image on monitor	Check the reverse light connection to ensure power is supplied. Verify all video cable connections are secure.
Blurry or shaking image	Clean the camera lens. Check the camera mounting to ensure it is stable and not vibrating.
Monitor does not auto-switch	Check the trigger wire connection to the reverse light. Review monitor settings to ensure auto-switch is enabled (if applicable).

8. User Tips

Optimal Monitor Placement: Adjust the monitor's bracket to find the best viewing position that doesn't obstruct your primary driving view but is easily visible when reversing.
Regular Lens Check: Before driving, especially in adverse weather, quickly check the camera lens for dirt, snow, or water droplets to ensure a clear view.
Guide Line Interpretation: Familiarize yourself with the parking guide lines in a safe, open area to accurately judge distances in various parking scenarios.
Complementary Aid: Remember that this system is an aid. Always use your mirrors and direct observation in conjunction with the monitor for maximum safety.

9. Warranty and Support

This product is certified with CE, indicating compliance with health, safety, and environmental protection standards. For detailed warranty information or technical support, please refer to the official product documentation or contact the manufacturer directly. A comprehensive user manual in PDF format is available for download, which may contain additional details not covered here. (Reference: User manual (PDF))