Milfra MFA05 MFA06 Smart PIR Motion Switch

Contents

Milfra Smart PIR Motion Sensor Light Switch

Models: MFA05, MFA06

1. Introduction

Thank you for choosing the Milfra Smart PIR Motion Sensor Light Switch. This device integrates a Passive Infrared (PIR) motion sensor with a standard light switch, offering automated lighting control and smart home integration via Tuya WiFi. It is designed to enhance convenience and energy efficiency in various indoor environments.

This smart switch is compatible with a variety of lamps, including energy-saving lamps, incandescent lamps, and LED lamps, ensuring stable performance.

Milfra Smart PIR Motion Sensor Light Switch, front view
Milfra Smart PIR Motion Sensor Light Switch (MFA05/MFA06)
Motion Sensor Light Switch with automatic turn-off feature
Automatic turn-off feature after a delay of approximately 45 seconds.

2. Safety Information

WARNING: Risk of Electric Shock. Improper installation can be dangerous or illegal. Consult a qualified electrician if you are unsure about any part of the installation process.

  • Always turn off power at the circuit breaker before installing or servicing the switch.
  • Ensure all wire connections are secure and properly insulated.
  • This device is designed for indoor use only.
  • Operate within the specified voltage and current ratings.
  • The product is rated for AC100-125V. Using it outside this range may cause damage or present a safety hazard.

3. Package Contents

Please check that all components are present:

  • Milfra Smart PIR Motion Sensor Light Switch (1-gang or 2-gang model)
  • Mounting Screws
  • Wire Nuts (or similar connectors)
  • User Manual (PDF available for reference: View PDF Manual)

4. Specifications

Attribute Value
Model Number MFA05, MFA06
Item Type SWITCHES
Features Smart switch with PIR Sensor
Is Smart Device Yes (Tuya WiFi)
Current 15A
Voltage AC100-125V
Material Plastic
Certification RoHS, CE
Wireless Frequency 2.4GHz WiFi
Origin Mainland China

5. Installation

Before you begin, ensure you have basic electrical knowledge and tools. If you are unsure, please consult a qualified electrician.

  1. Turn off Power: Locate your circuit breaker and turn off the power to the switch you are replacing. Verify the power is off using a voltage tester.

  2. Remove Old Switch: Carefully remove the old switch from the wall box. Disconnect the wires, noting which wire was connected to which terminal (Live, Load, Neutral, Ground).

  3. Identify Wires: Identify the Live (Hot), Load, Neutral, and Ground wires in your wall box. Typically:

    • Live (Hot) Wire: Usually black, carries power from the circuit breaker.
    • Load Wire: Usually black or red, connects to the light fixture.
    • Neutral Wire: Usually white, completes the circuit. (A neutral wire is required for this smart switch).
    • Ground Wire: Usually green or bare copper, for safety.
  4. Wire the Smart Switch: Connect the wires from your wall box to the corresponding terminals on the Milfra Smart PIR Motion Sensor Light Switch using wire nuts or appropriate connectors. Refer to the wiring diagram below.

    Product wiring diagram for Milfra Smart PIR Motion Sensor Light Switch
    Wiring Diagram: Connect Neutral Wire (White), Live Wire (Black), Load 1 (Red), Load 2 (Red, for 2-gang), and Ground (Green).

    Wiring Key:

    • Neutral Wire: Connects to the 'N' terminal (often white).
    • Live Wire: Connects to the 'L' terminal (often black).
    • Load 1: Connects to the 'Load 1' terminal (often red).
    • Load 2: Connects to the 'Load 2' terminal (for 2-gang models, often red).
    • Ground Wire: Connects to the 'Ground' terminal (green or bare copper).

    CAUTION: Ensure all connections are tight and insulated. The ground wire MUST be connected for safe operation.

  5. Mount the Switch: Gently push the wired switch into the wall box. Secure it with the provided screws. Attach the faceplate.

    Installed switch with exposed wiring during installation
    Example of wiring connections inside the wall box.
    Front view of the installed motion sensor light switch
    Front view of the installed switch.
  6. Restore Power: Turn the power back on at the circuit breaker.

6. Initial Setup and App Pairing

To utilize the smart features, you need to pair the switch with the Tuya Smart or Smart Life app.

  1. Download the App: Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store (iOS or Android).

  2. Register/Login: Open the app and register for a new account or log in with an existing one.

  3. Enter Pairing Mode: With the power on, the switch should automatically enter pairing mode (often indicated by a rapidly blinking LED). If not, press and hold the main switch button for 5-10 seconds until the LED blinks rapidly.

  4. Add Device: In the app, tap the "+" icon (usually in the top right corner) to add a new device. Select "Lighting" > "Switch (Wi-Fi)" or allow the app to auto-discover the device.

  5. Connect to Wi-Fi: Follow the on-screen instructions to connect the switch to your 2.4GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4GHz network during pairing.

  6. Configuration: Once successfully paired, you can rename the switch and configure its settings within the app.

    App interface for adjusting delay time and sensitivity settings
    App screenshot showing delay time adjustment (2 seconds to 60 minutes).

7. Operation

7.1 Manual Control

  • Press the main switch button to manually turn the connected light(s) ON or OFF.

7.2 Motion Sensor (PIR) Functionality

  • The integrated PIR sensor detects human body movement. When motion is detected, the light will automatically turn ON.
  • After a period of no motion, the light will automatically turn OFF. The default delay is 30 seconds, but this is adjustable via the app.
  • The motion sensor is designed to control the light(s) connected to the switch.
  • For 2-gang models, the PIR sensor typically controls one of the gangs (usually the primary one), while the other gang can be operated manually or configured independently via the app if supported. Please check app settings for specific configurations.
Installed switch indicating motion detection with a red light
The sensor may indicate motion detection with a light (e.g., red light).

7.3 App Control

  • Use the Tuya Smart/Smart Life app to remotely turn the light ON/OFF.
  • Adjust the motion sensor's delay time (from 2 seconds to 60 minutes).
  • Adjust the motion sensor's sensitivity (if available in app settings).
  • Set schedules, timers, and create smart scenes with other Tuya-compatible devices.

7.4 Voice Control

This switch works with Amazon Alexa and Google Home. Link your Tuya Smart/Smart Life account to your voice assistant app (Alexa or Google Home) and discover devices. You can then use voice commands like:

  • "Alexa, turn on [Switch Name]"
  • "Hey Google, turn off [Switch Name]"

8. Maintenance

  • Clean the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the PIR sensor lens is clear of dust and obstructions for optimal performance.
  • Periodically check wire connections for tightness, especially if you experience intermittent issues.

9. Troubleshooting

Light does not turn on/off:
Check if the circuit breaker is on. Verify all wiring connections are correct and secure. Ensure the light bulb is working.
Switch is not responding to motion:
Check the app settings for the PIR sensor's delay time and sensitivity. Ensure there are no obstructions blocking the sensor's view. Confirm the sensor mode is enabled in the app.
Cannot pair with the app:
Ensure your Wi-Fi network is 2.4GHz. Make sure your phone is connected to the same 2.4GHz network. Bring your phone closer to the switch and Wi-Fi router. Try resetting the switch by holding the main button until the LED blinks rapidly again.
Voltage discrepancy (120V vs. 220V):
The product is officially rated for AC100-125V. While some users report it working at 220V, this is not recommended or supported by the manufacturer and may void the warranty or pose a safety risk. Always adhere to the specified voltage range of AC100-125V.
2-gang model: Does the sensor control both lights?
Typically, the PIR sensor is integrated with one of the gangs (usually the primary one). The other gang often functions as a manual switch. Specific configurations and whether the sensor can control both gangs simultaneously may depend on the app's advanced settings. Check the Tuya Smart/Smart Life app for customization options.

10. User Tips

  • Easy Installation: Users have reported that the switch is easy to install and fits standard wall plates.
  • App Configuration: Take time to explore the Tuya Smart/Smart Life app settings for the PIR sensor, especially the delay time and sensitivity, to optimize performance for your specific environment.
  • Neutral Wire: Remember that a neutral wire is required for this smart switch to function correctly.

11. Frequently Asked Questions (FAQ)

Q: Is a neutral wire required for installation?
A: Yes, a neutral wire is required for the proper functioning of this smart switch.
Q: What is the voltage requirement for this switch?
A: The switch is designed for AC100-125V. Please ensure your electrical system matches this specification.
Q: Can I adjust the PIR sensor's settings?
A: Yes, you can adjust the delay time (from 2 seconds to 60 minutes) and potentially sensitivity through the Tuya Smart or Smart Life app.
Q: Does the 2-gang model have two independent motion sensors?
A: No, the PIR sensor is typically integrated to control one of the gangs. The other gang usually operates as a manual switch. App settings may offer some customization for the second gang.
Q: Is this switch compatible with EU standards (220-240V)?
A: This specific model is designed for US standard AC100-125V. Please check for models specifically designed for EU voltage standards if needed.

12. Warranty and Support

For warranty information and technical support, please refer to the official Milfra website or contact your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.