1. Introduction
The DATEIYOU K24 Turbine Flow Meter is an electronic device designed for accurate measurement of liquid flow rates. It is suitable for various liquids including water, urea, diesel, and methanol. This manual provides essential information for the safe and effective installation, operation, and maintenance of your flow meter.
Video: Overview of K24 Turbine Flow Meter variants.
2. Safety Information
- Warning! Before installation, please ensure that the selected medium (liquid) and the flow meter's specified flow range are compatible. Incompatible liquids or flow rates can damage the device or lead to inaccurate readings.
- Ensure all connections are secure and leak-free to prevent hazards.
- Do not expose the device to extreme temperatures or corrosive environments beyond its specifications.
- Handle the device with care to avoid physical damage.
3. Package Contents
Upon unpacking, please verify that you have received the following:
- 1 x K24 Turbine Flow Meter (selected variant)
- Instruction Manual (this document)
4. Product Overview
The K24 Turbine Flow Meter features a digital display for real-time flow rate and total volume. It is available in various configurations to suit different pipe sizes and material requirements:
- G1" Plastic Thread: Internal thread, plastic body.
- G1" Stainless Steel: Internal thread, stainless steel body.
- G1/2" Pagoda Connector: Plastic body with hose barb connector.
- G1" External Thread (Red/Blue): External thread, plastic body.
Figure 1: Various K24 Flow Meter types including G1" plastic, G1/2" Pagoda, and G1" stainless steel.
Figure 2: Close-up of the electronic display showing flow rate and total volume.
Figure 3: View of the internal turbine mechanism.
5. Setup and Installation
Follow these steps for proper installation:
- Select the Correct Meter: Ensure the meter's material (plastic or stainless steel) and connector type (G1" thread, G1/2" Pagoda) are compatible with your piping system and the liquid being measured.
- Check Compatibility: Verify that the liquid medium and its flow rate fall within the meter's specified range (refer to Specifications section).
- Prepare the Installation Point: Ensure the pipe section where the meter will be installed is clean and free of debris.
- Install the Meter:
- For threaded connections (G1"), apply thread sealant (e.g., PTFE tape) to the threads and screw the meter securely into the pipeline.
- For Pagoda connectors (G1/2"), attach the hose securely and use a hose clamp if necessary to prevent leaks.
- Ensure Flow Direction: Install the meter in line with the liquid flow. While not explicitly marked, turbine meters typically require flow in a specific direction for accurate measurement. Ensure the turbine can rotate freely.
- Check for Leaks: After installation, slowly introduce liquid into the system and check all connections for leaks.
Figure 4: Dimensions for G1" Plastic Thread Flow Meter (100mm length, 85mm height, 55mm width).
Figure 5: Various connector types including Pagoda, G1/2", and G3/4". G1/2" Pagoda meter has a length of 105mm and height of 75mm.
6. Operation
The K24 Flow Meter is designed for straightforward operation:
- Display: The digital display shows the current flow rate (e.g., L/min) and a cumulative total volume (e.g., L).
- RESET Button: Press this button to reset the current batch or trip volume reading to zero. The total cumulative volume usually remains unaffected.
- CAL Button: This button is used for calibration. Refer to specific calibration procedures if precise adjustments are required. For general use, the factory calibration is sufficient.
- Power: The device is typically battery-powered (details not specified, assume internal long-life battery or common replaceable type).
7. Maintenance
- Cleaning: Periodically inspect the meter for any build-up or debris, especially if measuring liquids that may leave residue. Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Internal Inspection: If flow accuracy degrades, the internal turbine may need inspection for blockages or wear. This typically requires professional servicing.
- Battery Replacement: If the display becomes dim or unresponsive, the battery may need replacement. Consult the manufacturer or seller for specific battery type and replacement instructions.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Display dim | Low or dead battery | Replace battery (if accessible). |
| No flow reading | No liquid flow; Turbine blocked; Incorrect installation direction | Ensure liquid is flowing; Check for blockages; Verify installation direction. |
| Inaccurate reading | Flow rate outside range; Air in line; Turbine wear/damage; Calibration needed | Ensure flow is within range; Purge air from system; Inspect turbine; Recalibrate if necessary. |
| Leakage at connections | Loose connections; Insufficient sealant | Tighten connections; Reapply thread sealant. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | COH-102-02 |
| Brand Name | DATEIYOU |
| Joint Pipe Bore Size | 1" (G1"), 1/2" (G1/2") |
| Coupling Type | Join (Threaded, Pagoda) |
| Measurement Range (Liquid Water) | 3-100 L/min (LPM) |
| Specific Flow Ranges |
|
| DIY Supplies | Electrical |
| Origin | Mainland China |
| Certification | CE |
| Product Material | Plastic, Stainless Steel, Glass (display) |
| Dimensions |
|
10. User Tips
No specific user tips were available from provided reviews or Q&A content.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.