Hi-Link HLK-15M24C

Contents

Hi-Link HLK-15M24C 15W 24V 625mA AC DC Power Supply Module Instruction Manual

Model: HLK-15M24C

Video: Product overview showing the Hi-Link 15W C series AC DC power module, highlighting its compact size and input voltage range.

1. Product Overview

The Hi-Link HLK-15M24C is a compact and efficient 15W AC to DC power supply module designed for a wide range of applications. It features a global universal input voltage range and provides a stable 24V DC output. This module is engineered for high reliability, low power consumption, and robust protection against short circuits and over-current conditions.

Front view of the Hi-Link HLK-15M24C power module, showing input/output labels and certifications.

Image: Front view of the Hi-Link HLK-15M24C power module, showing input/output labels and certifications.

2. Key Features

  • Ultra-thin, ultra-small, compact volume.
  • Global universal input voltage (85~265Vac).
  • Low power consumption, green environmental protection, no-load loss <0.1W.
  • Low ripple and low noise output.
  • High output short circuit and over-current protection with self-recovery function.
  • High efficiency and high power density.
  • Input and output isolation voltage of 3000Vac.
  • 100% full load aging and testing for reliability.
  • High reliability, long life design with continuous working time greater than 100,000 hours.
  • Meets UL, CE requirements; product design adheres to EMC and safety testing standards.
  • Environmentally friendly waterproof plastic potting, providing moisture, vibration, water, and dust resistance to IP65 standards.
  • Economic and cost-effective solution.
  • Operates without the need for external circuitry.
  • 1-year quality guarantee period.

3. Specifications

3.1 Electrical Specifications

ParameterValue
Model NumberHLK-15M24C
Input Voltage Range85~265Vac
Output TypeDC
Output Voltage24V
Output Current625mA
Output Power15W
Isolation Voltage3000Vac
Voltage Regulation±0.2
ConnectionPlug In
CertificationRoHS

3.2 Environmental Conditions

ItemTechnical ParametersUnitsNotes
Working temperature-25—+60℃
Storage temperature-40—+80℃
Relative humidity5—95%
Thermal methodsNatural cooling
Atmospheric pressure80—106Kpa
Altitude≤2000m
VibrationVibration coefficient 10~500Hz, 2G 10min./1 cycle, 60min. each along X,Y,Z axesMeets requirements for secondary road transportation

3.3 Physical Dimensions

  • Size: 47.5mm * 28.5mm * 22mm
  • Pin dimension: 5mm
  • Waterproof standard: IP65
Dimensional drawing and pinout diagram for the Hi-Link 15W AC DC power module, with measurements in millimeters.

Image: Dimensional drawing and pinout diagram for the Hi-Link 15W AC DC power module, with measurements in millimeters.

4. Setup and Installation

The HLK-15M24C module is designed for easy integration into various electronic systems. It requires minimal external components for basic operation. Always ensure power is disconnected before making any connections.

4.1 Pinout Description

  • AC (Pins 1 & 2): AC input terminals (85-265Vac).
  • -Vo (Pin 3): Negative DC output terminal.
  • +Vo (Pin 4): Positive DC output terminal (24V).

For optimal performance and safety, especially when meeting certification requirements, certain external components are recommended:

Component Number / Recommended DeviceFunctionsRecommended Value
Input Part
FuseProtect the circuit from damage when the module is working wrong1A/250Vac, Slow fuse
VaristorThe cumulative surge is to protect the module from damage10D561K
C1/Safety capacitanceFiltering, safety protection (EMC certification)0.1uF/275Vac
L1/Common-mode inductanceEMI filteringSensible value: 10-20mH, Current: 70-500mA
Output Part
C2/filter capacitorFilter, after adding this capacitor, the user can adjust the output ripple voltageAluminium electrolytic capacitance, capacity 100-220 UF, voltage reduction greater than 75%
R1/LoadLoad

Notes:

  • Fuse and varistor are basic protective circuits and must be connected.
  • If authentication/certification is required, the safety capacitance and common-mode inductance should not be omitted.
Diagram illustrating recommended input and output circuit components for the power module, including fuse, varistor, capacitors, and inductors.

Image: Diagram illustrating recommended input and output circuit components for the power module, including fuse, varistor, capacitors, and inductors.

5. Operating Instructions

Once correctly installed with the necessary protective components, the HLK-15M24C module operates automatically upon receiving AC input within its specified range (85-265Vac). It will provide a stable 24V DC output.

5.1 Input Voltage and Load Characteristics

The module is designed to maintain stable output across its specified input voltage range. The load capacity may vary slightly with input voltage and ambient temperature. Refer to the characteristic curves for detailed performance.

Graphs showing input voltage and load characteristics curve, and working environment temperature and load characteristics for the power module.

Image: Graphs showing input voltage and load characteristics curve, and working environment temperature and load characteristics for the power module.

5.2 Thermal Considerations

The module uses natural cooling. Ensure adequate airflow around the module, especially when operating at higher loads or ambient temperatures, to prevent overheating and maintain long-term reliability.

6. Maintenance

The HLK-15M24C power module is designed for maintenance-free operation under normal conditions. However, adhering to the following guidelines can prolong its lifespan:

  • Environmental Control: Operate the module within the specified working temperature range of -25°C to +60°C and relative humidity of 5-95%. Avoid exposure to extreme temperatures, high humidity, or corrosive environments.
  • Cleanliness: Keep the module free from dust and debris to ensure proper heat dissipation.
  • Physical Inspection: Periodically inspect the module and its connections for any signs of physical damage, loose wiring, or discoloration.
  • Waterproof Integrity: While rated IP65, avoid submerging the module or exposing it to high-pressure water jets. Ensure the potting remains intact.

7. Troubleshooting

If you encounter issues with your HLK-15M24C module, consider the following:

7.1 No Output Voltage

  • Check Input Power: Verify that the AC input voltage is within the 85-265Vac range and is correctly connected to pins 1 and 2.
  • Inspect Fuse: If an external fuse is used, check if it has blown. Replace with a 1A/250Vac slow fuse if necessary.
  • Overload Protection: The module has over-current protection. Disconnect the load and check if the output voltage returns. If so, the load may be drawing too much current.
  • Short Circuit: Ensure there is no short circuit on the output terminals. The module features short-circuit protection with self-recovery.

7.2 Incorrect Output Voltage

  • Load Condition: Ensure the load is within the module's 15W capacity. Excessive load can cause voltage drop.
  • External Components: Verify that any external filter capacitors (C2) are correctly installed and of the appropriate value (100-220uF).

7.3 Overheating

  • Ambient Temperature: Ensure the operating environment temperature is within -25°C to +60°C.
  • Ventilation: Provide adequate airflow around the module. Avoid enclosing it in a sealed space without ventilation.
  • Load: Reduce the load if the module is consistently running hot, especially in high ambient temperatures.

8. User Tips

  • For applications requiring strict EMC compliance, ensure all recommended input and output filtering components are properly implemented.
  • Always double-check wiring polarity before applying power to prevent damage to the module or connected devices.
  • Consider using a heatsink if the module is to be operated continuously at maximum load in high ambient temperatures, even though it's designed for natural cooling.

9. Warranty and Support

The Hi-Link HLK-15M24C power supply module comes with a 1-year quality guarantee period from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For technical support, inquiries, or warranty claims, please refer to the official Hi-Link documentation or contact your vendor. Additional resources, including a user manual in PDF format, may be available:

© 2024 Hi-Link. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.