AELED TC420 TC421

Contents

AELED TC420/TC421 Wifi Time Programmable LED Controller User Manual

Models: TC420, TC421

1. Introduction

This programmable time controller allows users to customize LED load output changes over time. It is designed to control LED strip lights with up to five channels, making it suitable for various applications such as plant lights, light box advertising, stage lighting, and home decoration. The controller can be programmed via a PC using a USB connection, and the TC421 model also supports WiFi programming via a mobile application.

For a comprehensive guide, please refer to the official user manual PDF: User Manual (PDF)

2. Safety Information

  • Ensure the power supply voltage matches the controller's specifications (DC 12-24V).
  • Do not exceed the maximum load current of 4A per channel or 20A total.
  • Avoid exposing the controller to extreme temperatures outside the -20°C to 60°C range.
  • Keep the device dry and away from moisture.
  • Disconnect power before making any connections or performing maintenance.

3. Package Contents

The package typically includes the following items:

  • 1 x LED Time Controller (TC420 or TC421)
  • 1 x USB Wire
  • 1 x CD Disk (containing software and drivers)
  • 1 x User Manual
AELED TC420/TC421 LED Time Controller and packaging
Image: AELED TC420/TC421 LED Time Controller and its packaging.
TC420 package contents including controller, USB cable, CD, and manual
Image: TC420 package contents, showing the controller, USB cable, CD disk, and user manual.

4. Product Overview

The LED Time Controller features a compact design with an LCD display, control buttons, and various input/output ports.

4.1. Controller Layout

Front view of the LED Time Controller with display and buttons
Image: Front view of the LED Time Controller, showing the display, Power/Signal indicators, and control buttons (Menu, Enter, Up, Down).

4.2. Input and Output Interfaces

Side view of the controller showing Reset button, USB port, and DC power input
Image: Side view of the controller, highlighting the Reset button, USB port, and DC power input.
Diagram of controller input interface with numbered descriptions
Image: Input Interface Description. 1. Reset button (for controller crash). 2. USB signal joint (for programming). 3. DC plug (for input voltage, especially for small loads).
Close-up of the controller's output terminals for LED channels
Image: Close-up of the output terminals (CH1-CH5, V+, V-).
Diagram of controller output interface with numbered descriptions
Image: Output Interface Description. 1-5: Load output negative poles for channels 5-1 respectively. 6: Load output common anode. 7-8: Power supply input positive and negative poles (choose one between this and DC plug if load power is too large).

4.3. Model Differences (TC420 vs TC421)

Table comparing features of TC420 and TC421 models
Image: Main differences between TC420 and TC421 models.
Main Differences: TC420 vs TC421
FeatureTC420TC421
WiFiNoneYes
SoftwarePC (Windows) PledPC (Windows) + APP (Android & iOS) Pled Smart Timer
Time Setting1 min/time level shortest, can be set30 min/time level, cannot be changed

5. Setup

5.1. Wiring Diagram

Connect your LED strips and power supply to the controller as shown in the diagram below. Ensure correct polarity (V+ to V+, V- to V-, and individual channel negatives to the corresponding LED strip negative inputs).

Wiring diagram for connecting LED strips to the controller
Image: Typical application wiring diagram for connecting LED strips to the controller.

5.2. Software Installation (PC)

Insert the provided CD disk into your computer's CD-ROM drive. Follow the on-screen instructions to install the Pled software. This software is used to create and download custom lighting schedules to the controller via the USB cable.

5.3. TC421 Wireless Programming Setup

For the TC421 model, you can program wirelessly via a computer connected to a 2.4GHz WiFi router. 5GHz networks are not supported.

Diagram for wireless programming of TC421 via a 2.4GHz router
Image: Diagram illustrating how to program the TC421 wirelessly on a computer. The TC421 connects to a 2.4GHz router, and your PC can connect to the same router via 2.4GHz WiFi or an RJ45 cable.

6. Operation

6.1. Power Saving Mode

When the controller is in setup mode without any key press for 30 seconds, the screen backlight will turn off. If no key is pressed for another 30 seconds, the controller will enter energy saving mode. In this mode, the first line of the screen shows the current date and mode, and the second line displays the current time.

Controller display in energy saving mode
Image: Controller display in energy saving mode (Figure 1).

6.2. Menu Navigation and Settings

Press the "Menu" button to enter the time display interface. The display will automatically switch between current time/date and mode every two seconds. Press "Enter" to access the main menu.

The main menu displays options like "1. Mode", "2. Setup", and "3. Run". Use the "+" and "-" keys to switch between options and "Enter" to select.

Controller display in time setting mode
Image: Controller display in Time setting mode (Figure 6).
Controller display in date setting mode
Image: Controller display in Date setting mode (Figure 7).
Controller display in sound setting mode
Image: Controller display in Sound setting mode (Figure 8).
Controller display in mode selection
Image: Controller display in Mode selection (Figure 4).
Controller display in run menu
Image: Controller display in Run menu (Figure 9).

6.3. WiFi Connection (TC421 Only)

To connect the TC421 to your WiFi network and use the mobile app:

  1. Ensure your mobile device is connected to a 2.4GHz WiFi network.
  2. Open the dedicated mobile application (available for Android and iOS).
  3. Navigate to the WiFi settings within the app.
  4. Select your WiFi network. If your network has no password, follow the left example in the image below. If it has a password, follow the right example.
  5. Click the WiFi icon to switch between password/no password input.
  6. Search for the device within the app.
Mobile app screenshot showing WiFi network selection
Image: Mobile app screenshot for WiFi network selection.
Mobile app screenshot showing WiFi password input and device search
Image: Mobile app screenshot for WiFi password input and device search function.

7. Maintenance

  • Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure proper ventilation around the device to prevent overheating.
  • Regularly check all wiring connections for looseness or damage.
  • If the controller crashes, press the "Reset" button on the side to restart it.

8. Troubleshooting

  • Controller not responding: Check power connections. If powered, try pressing the "Reset" button.
  • LEDs not lighting up: Verify all wiring connections, especially polarity. Ensure the power supply is functioning and providing the correct voltage. Check the load current to ensure it does not exceed the controller's limits.
  • Programming issues: Ensure the USB cable is securely connected to both the controller and the PC. For TC421 WiFi programming, confirm your router is operating on 2.4GHz and your mobile device is connected to it.
  • Mobile app not working: Some users have reported regional issues with the app. Check for app updates or contact support if the app is not functioning in your area.

9. Specifications

FeatureDetail
Model NumbersTC420, TC421
Brand NameAELED
Working Temperature-20°C to 60°C
Supply VoltageDC 12-24V
Power SourceDC
Output Channels5 channels (five COMS drain-open output)
Max Load Current4A each color (20A total)
Connection ModeCommon anode
MaterialAluminum
Gross Weight370g
External Dimension120mm x 69mm x 24mm
FeaturesTime programmable
CertificationCCC
Warranty2 Years
Applicable LightsLED strip lights like SMD5050, 3528, 2835, 5630

10. User Tips

  • The controller functions effectively as a dimmer, providing smooth light adjustments.
  • If you do not have a CD drive for software installation, check the manufacturer's website or the user manual PDF for alternative download links for the Pled software.
  • For TC421 WiFi models, ensure your network is 2.4GHz, as 5GHz is not supported for connection.

11. Warranty and Support

This product comes with a 2-year warranty from the date of purchase. For technical support, software updates, or warranty claims, please refer to the contact information provided in the full user manual PDF or contact your retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.