RACBOX PRJHELA5_L

Contents

RACBOX 3.0 inch Bi-xenon Projector Lens User Manual

Model: PRJHELA5_L

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your RACBOX 3.0 inch Bi-xenon Projector Lenses. These lenses are designed for retrofitting headlights, compatible with D1, D2, D3, and D4 HID car lamps, and are an ideal replacement for Hella 3R G5 projectors. Please read this manual thoroughly before use to ensure proper function and safety.

RACBOX Bi-xenon Projector Lens and accessories
Figure 1: RACBOX 3.0 inch Bi-xenon Projector Lens with included accessories.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Product Information & Specifications

The RACBOX 3.0 inch Bi-xenon Projector Lens is constructed from full metal material for durability and a long lifespan. It features a high-quality anti-seize motor for precise control of the projector's bi-xenon function, ensuring reliable switching between high and low beams.

Close-up of the projector lens showing full metal material and high-quality anti-seize motor.
Figure 2: Internal components highlighting durable metal construction and anti-seize motor.
View of the bi-xenon projector lens mechanism, illustrating how it changes between high and low beam.
Figure 3: Bi-xenon mechanism allowing for high and low beam switching.

Technical Specifications

Feature Detail
Brand Name RACBOX
Model Name PRJHELA5_L
Item Type Lens
Socket Type D2S (Compatible with D1, D2, D3, D4 HID bulbs)
Certification CE
Origin Mainland China
Material Full metal
Package Weight 1.0 kg
Package Dimensions (L x W x H) 15 cm x 10 cm x 5 cm
Detailed product size diagram with measurements in millimeters and inches.
Figure 4: Product dimensions for the projector lens.

4. Installation Instructions

Installation of projector lenses requires careful attention and may involve working with vehicle electrical systems. If you are not confident in performing the installation yourself, it is recommended to seek assistance from a qualified professional.

  1. Turn off the engine and disconnect the vehicle battery to prevent short circuits.
  2. Remove the headlight assembly from the vehicle.
  3. Open the headlight housing properly using professional tools.
  4. Remove the original reflector or bulb from the headlight.
  5. Mount the projector lens into the headlight housing and fix it with brackets or screws.
  6. Adjust the lens position to ensure it is centered and stable.
  7. Connect the low beam and high beam wires correctly.
  8. Install the shrouds or lens covers if needed.
  9. Re-seal the headlight housing to ensure it is waterproof and airtight.
  10. Reinstall the headlight assembly back into the vehicle.
  11. Adjust the light beam pattern and test low beam and high beam functions.
  12. Check all connections and ensure no abnormal shadows or glare.
Step-by-step visual guide for replacing D1/D2/D3/D4 HID bulbs in the projector.
Figure 5: Guide for installing D1/D2/D3/D4 HID bulbs into the projector lens.

5. Operation

The bi-xenon projector lens allows for both low beam and high beam functionality from a single HID bulb. The internal mechanism shifts to change the light pattern. After installation, ensure proper adjustment for optimal visibility and to avoid dazzling other drivers.

  • Low Beam: Provides a wide and clear light pattern, ideal for regular driving and preventing glare to oncoming traffic.
  • High Beam: Offers a wide and focused light pattern for maximum illumination when needed, such as on unlit roads.
Comparison of low beam (wide and clear) and high beam (wide and focused) light patterns.
Figure 6: Example of low beam and high beam patterns.

6. Maintenance

To ensure the longevity and optimal performance of your projector lenses, follow these maintenance guidelines:

  • Regularly inspect the headlight housing for any signs of moisture ingress or damage to the seals.
  • Keep the outer lens surface clean using a soft cloth and mild cleaning solution. Avoid abrasive materials that could scratch the lens.
  • Periodically check the electrical connections for corrosion or looseness.
  • If a bulb needs replacement, refer to the installation instructions for safe and correct procedure.

7. Troubleshooting

If you encounter issues with your projector lenses, consider the following common troubleshooting steps:

  • No Light Output: Check bulb connection, ballast connection, and vehicle's headlight fuse. Ensure the bulb is correctly seated.
  • Abnormal Shadows or Glare: Re-check lens alignment and adjustment. Ensure shrouds are properly installed and not obstructing the beam.
  • Flickering Light: This could indicate a faulty HID bulb, ballast, or an unstable power supply. Inspect connections and components.
  • High/Low Beam Not Switching: Verify the wiring for the bi-xenon solenoid. Ensure the motor is functioning correctly and not obstructed.

8. User Tips

Based on user experiences, here are some tips for getting the most out of your RACBOX projector lenses:

  • Pre-test Components: Before sealing the headlight housing, connect all electrical components (bulbs, ballasts, solenoids) and test their functionality to ensure everything works as expected.
  • Aiming: Proper headlight aiming is crucial after installation. Use a wall or a professional aiming station to adjust the beam pattern to legal specifications.
  • Seal Quality: Pay extra attention to re-sealing the headlight housing. A good seal prevents moisture and dust from entering, which can significantly extend the lifespan of your projector and bulb.

9. Manufacturer & Compliance

Manufacturer Information

Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com

Compliance Information

This product is an auxiliary accessory for automotive lighting and is only used for the normal replacement and upgrade of the original car lights, not for illegal modification or illegal use. The products meet the relevant national automotive lighting industry standards, and have undergone strict quality testing before leaving the factory, and are qualified to leave the factory.

This product is CE certified.

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.