Fredorch F22 Automatic Wireless Sex Machine User Manual

1. Product Overview

The Fredorch F22 is an automatic wireless sex machine designed for adult use. It features a robust metal construction, remote control operation, and adjustable settings for a personalized experience. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting.

2. Safety Information

• The machine's power is very strong. Do not use glass attachments to prevent damage to the human body. Any damage resulting from such use is not the responsibility of the manufacturer.
• This machine is equipped with 3-times overcurrent protection.
• This product is strictly prohibited for use by individuals under the age of 18. Please use this product responsibly and within legal limits.

3. Setup Instructions

Follow these steps to assemble your Fredorch F22 machine:

1. Install 2 casing brackets: Insert the long pipe into the short pipe clamp and tighten the screw clockwise with an inner hexagon wrench.
2. Assembly of main machine and tube bracket: Loosen the snap wrench in a reverse direction, insert the pipe bracket into the snap wrench and pull the snap wrench to lock it.
3. Install the telescopic rod: The threaded end of the telescopic rod is inserted into the main engine through the main engine bushings and connected with the slider in the main engine, and then twisted clockwise into the threaded hole of the slider for locking.
4. Install the power supply: Install the power plug into the socket to power up.
5. Installation method of self-locking joints and appliances: Insert the appliance connector directly into the circular hole of the connector as shown in the figure and automatically lock it. If you want to remove the appliance, you need to pull the connector ring in the opposite direction.
6. Installation completed.

4. Operating Instructions

4.1 Remote Control Functions

The wireless remote control allows for easy adjustment of the machine's functions:

• Accelerate: Increases the speed/frequency.
• Slow down: Decreases the speed/frequency.
• Suspend: Pauses operation.
• Frequency conversion: Adjusts the stroke pattern or frequency.

4.2 Adjusting Pipe Clamp Tightness

The tightness of the pipe clamp can be adjusted as needed using the small hand screw.

4.3 Adjusting Distance (Stroke Length)

To adjust the stroke length (distance):

1. Loosen the screw counterclockwise by turning the screw by hand.
2. Drag the screw to adjust to an appropriate distance (stroke length is 3-9cm).
3. Lock it clockwise.

4.4 Adjustable Angle

The machine's angle can be adjusted from 45 degrees to 90 degrees to suit your preferences.

4.5 Using Mobile Power Supply

If you are using a mobile power supply:

1. Insert the yellow end of the wiring into the power socket of the machine.
2. Insert the black end into the mobile power socket.
3. Turn on the mobile power to use.

Charging Mobile Power Supply: If there is no power in the mobile power supply for charging, the blue light indicates full power when full. If the charger light changes from red to blue, it means full power.

5. Maintenance

• Cleaning: After each use, wipe down the machine and any accessories with a damp cloth and a mild, non-abrasive cleaner. Ensure all parts are dry before storage. Avoid submerging the main unit in water or using harsh chemical cleaners.
• Storage: Store the machine in a cool, dry place away from direct sunlight and extreme temperatures. Keep it disassembled in its carrying bag (if provided) to protect components.
• Lubrication: Periodically check moving parts for smooth operation. Apply a small amount of silicone-based lubricant if needed, avoiding contact with electrical components.

6. Troubleshooting

• Machine stops running (overcurrent protection): If the machine stops unexpectedly, it may be due to the overcurrent protection system. Unplug the power supply for 30 seconds, then plug it back in and power it on again.
• Remote control not working: If the remote control fails to operate the machine, unplug the main power plug. While the power is on, press the circle button on the remote control for 5 seconds. Then reconnect the main power.
• Attachments not fitting securely: Ensure the self-locking joint is properly engaged. Insert the appliance connector directly into the circular hole until it locks automatically. To remove, pull the connector ring in the opposite direction.
• Unusual noise during operation: The machine operates at a low noise level (30-38 dB). If you notice unusual or excessive noise, ensure all parts are securely assembled and tightened.

7. Specifications

8. User Tips

• Responsible Use: Always use the product within the scope permitted by law and ensure all safety guidelines are followed.
• Speed and Frequency: Experiment with the 'Accelerate', 'Slow down', and 'Frequency conversion' buttons on the remote control to find your preferred pulse rate and pattern.
• Angle Adjustment: Utilize the adjustable angle feature (45 to 90 degrees) to optimize comfort and experience.
• Attachment Compatibility: While the machine is powerful, avoid using fragile attachments, especially glass, to prevent damage and ensure safety.

9. Frequently Asked Questions (FAQ)

Q: What is the wattage of the Fredorch F22 machine?

A: The exact wattage (e.g., 120W or 200W) is not specified in the product information. However, it operates on a 24V DC power supply and is described as having 'super strong' power.

Q: How many pulses per minute does the machine provide?

A: The Fredorch F22 features adjustable speed and frequency via its wireless remote control, allowing users to customize the pulse rate. Specific pulses per minute are not provided as a fixed value.

10. Warranty and Support

For detailed information regarding warranty, returns, or technical support, please refer to the official product documentation or contact the seller directly.

An additional user manual in PDF format is available for download: View User Manual (PDF).