AK Hanhope Dashboard LCD Screen Display for Land Rover Range III

Contents

AK Hanhope Dashboard LCD Screen Display for Land Rover Range III

Instruction Manual

1. Product Overview

This high-quality LCD display is designed for pixel repair in the dashboard instrument cluster of Land Rover Range III vehicles. It addresses common issues such as dark, dim, or missing pixels, restoring clarity and functionality to your vehicle's display.

LCD panel with an arrow pointing to its location in a car dashboard, showing 'RANGE 335 KM' display.
Figure 1: LCD panel integrated into a Land Rover Range III dashboard, displaying vehicle information.

2. Features

  • High quality LCD display specifically for pixel repair.
  • Resolves issues where the LCD is dark, dim, or has missing pixels.
  • 100% Brand New product, tested prior to leaving the factory.

3. Specifications

AttributeValue
Brand NameAK Hanhope
MaterialLCD Display for Land Rover
Item Length170.0mm
Item Width29.3mm
Item Height2.15mm
Item Weight0.1KG
Country/Region of ManufactureChina
OriginMainland China
Special FeaturesLCD Display for Land Rover
Placement on VehicleLCD Display for Land Rover
Manufacturer Part NumberLCD Display for Land Rover
Interchange Part NumberLCD Display for Land Rover
Other Part NumberLCD Display for Land Rover
OEM NO.LCD Display for Land Rover
High-concerned chemicalNone

Compatibility

  • Land Rover Range Rover (2002 - 2006)

OEM Part Numbers

  • 28185BH30C
  • 28185BH30D

4. Installation Guide

Installation of this LCD display requires specialized electronic handling and proper heat seal techniques. It involves soldering the silver ribbon cable onto the Printed Circuit Board (PCB) using heat T bonding. This process demands skillful techniques to avoid damaging the delicate silver flat cable.

Professional installation is highly recommended due to the precision and specialized tools required. Attempting installation without adequate experience and equipment may result in damage to the product or vehicle components.

Required Tools (Not Included):

  • Heat T bonding tool
  • Precision soldering equipment
  • Other specialized tools for dashboard disassembly and reassembly
Comparison image showing a dashboard display 'BEFORE' with pixel issues and 'AFTER' with the repaired display.
Figure 2: Visual representation of display improvement after installation, showing 'BEFORE' pixel issues and 'AFTER' clear display.
Rear view of the LCD display panel, showing the ribbon cable connection area.
Figure 3: Rear view of the LCD display, highlighting the ribbon cable connection point for heat bonding.
Front view of the LCD display panel.
Figure 4: Front view of the LCD display panel.
Angled view of the LCD display panel.
Figure 5: Angled view of the LCD display panel.

Product Video

Video 1: A 7-second clip showcasing the LCD display panel from various angles.

For a detailed visual guide, you may refer to the official user manual PDF available at this link.

5. Operating Instructions

Once correctly installed, the LCD screen display functions as an integral part of your Land Rover Range III's instrument cluster. It will automatically display vehicle information such as speed, RPM, fuel level, temperature, and other relevant data, as controlled by the vehicle's onboard computer system. No direct user operation is required for the display itself beyond the vehicle's standard controls.

6. Maintenance

The LCD display is designed for durability and requires minimal maintenance. To ensure longevity and clear visibility:

  • Clean the screen gently with a soft, lint-free cloth.
  • Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the screen surface.
  • Do not apply excessive pressure to the screen.

7. Troubleshooting

Common Issues and Solutions:

  • Display is dark, dim, or has missing pixels: This product is specifically designed to resolve these issues. If the problem persists after installation, it indicates an issue with the installation process or a fault in other components of the instrument cluster. Re-check connections or consult a professional.
  • No display after installation: Verify all connections, especially the heat-bonded ribbon cable, are secure and correctly aligned. Ensure the vehicle's power supply to the instrument cluster is functioning correctly.
  • Incorrect display information: This is typically not an issue with the LCD panel itself but rather with the vehicle's sensors or the instrument cluster's main board. Consult a vehicle diagnostic specialist.

8. User Tips

  • Seek Professional Help: Given the delicate nature of heat bonding the ribbon cable, it is strongly advised to have this component installed by a qualified automotive electronics technician. Incorrect installation can lead to permanent damage.
  • Verify Compatibility: Before purchasing, ensure the OEM part numbers (28185BH30C, 28185BH30D) and vehicle model (Land Rover Range Rover 2002-2006) match your specific requirements to avoid compatibility issues.

9. Warranty and Support

For any questions regarding product functionality, installation, or warranty claims, please contact the seller directly. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.