AUTOXBERT VW Golf MK6 2009-2012 Mirror Glass

Contents

AUTOXBERT Heated Side Mirror Glass User Manual

Model: VW Golf MK6 2009-2012 Mirror Glass

Brand: AUTOXBERT

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AUTOXBERT Heated Side Mirror Glass. This product is designed as a direct replacement for the original side mirror glass on Volkswagen Golf MK6 models manufactured between 2009 and 2012. It features a wide-angle view and integrated heating functionality for improved visibility in various weather conditions.

AUTOXBERT Heated Side Mirror Glass for VW Golf MK6

Figure 1: AUTOXBERT Heated Side Mirror Glass with heating indicator and a VW Golf MK6.

2. Safety & Warnings

SAFETY FIRST: Always prioritize safety when working on your vehicle.

  • Disconnect Vehicle Battery: Before beginning any work, disconnect the negative (-) terminal of your vehicle's battery. This prevents electrical shorts, potential damage to vehicle control modules, and reduces airbag system risks.
  • Work in a Safe Area: Park your vehicle on a level surface, engage the parking brake, and ensure you are working in a well-lit area.
  • Use Appropriate Tools: Use plastic pry tools to avoid damaging paint or trim. Avoid excessive force.
  • Handle Glass with Care: Mirror glass can break. Handle it carefully to prevent injury.

3. Product Specifications

FeatureDescription
Brand NameAUTOXBERT
CompatibilityVW Golf MK6 (2009, 2010, 2011, 2012)
Item TypeMirror & Covers (Replacement Glass)
MaterialGlass, Plastic (backing plate)
Special FeaturesHeated, Wide Angle, Blind Spot Line
Item Length16.5 cm
Item Width13 cm
Item Weight0.28 kg
CertificationISO9001
Mirror Glass TypeConvex Angle
Mirror Glass Dimensions

Figure 2: Dimensions of the mirror glass (13cm width, 16.5cm length).

Front view of mirror glass with blind spot line

Figure 3: Front view of the mirror glass, showing the integrated blind spot line.

4. Installation Instructions

Follow these steps carefully to replace your wing mirror glass. Refer to Figure 4 for a visual guide.

How to Replace Wing Mirror Glass Diagram

Figure 4: Diagram illustrating the steps to replace wing mirror glass.

Step 1: Removing the Old Mirror Glass

  1. Adjust the mirror face to its maximum inward tilt (pointing towards the vehicle window). This provides the best access behind the glass.
  2. Gently insert your fingers or a plastic pry tool behind the lower outer edge of the mirror glass.
  3. Apply steady, firm pressure outwards and backwards (away from the housing). You will hear a series of clicks/pops as the plastic clips release.
  4. Work your way around the edge until the entire glass is free. DO NOT use excessive force or pry from the top center, as the glass can break.
  5. Once loose, carefully tilt the glass forward and locate the electrical connector on the back (for heated mirrors).
  6. Press the small locking tab on the connector and disconnect it.

Step 2: Preparing for New Glass

  1. Thoroughly clean the exposed mirror backing plate/motor assembly in the housing. Remove any old adhesive residue or debris.
  2. Inspect the new mirror glass. Remove any protective film.
  3. Ensure the new mirror glass matches the orientation (Left/Right) of the one being replaced.
Back of Mirror Glass with Heating Terminals

Figure 5: Rear view of the mirror glass, showing the mounting clips and heating element terminals.

Step 3: Installing the New Mirror Glass

  1. First, connect the electrical connector from the vehicle's wiring harness to the back of the new mirror glass. Ensure it clicks and locks into place.
  2. Carefully align the new glass with the motor/backing plate. It often helps to hook the top edge in first.
  3. Then, gently press the bottom and sides until all clips snap securely in place. Listen for soft clicks.
  4. Do not press on the center of the glass. Apply pressure evenly around the edges.

Step 4: Final Checks

  1. Gently press around the perimeter of the newly installed mirror to ensure a secure fit.
  2. Reconnect the vehicle battery.
  3. Test the power mirror adjustment function to ensure it moves smoothly in all directions.

5. Operating Instructions (Heated Function)

Your mirror glass may include a heated function as indicated in the product description. To test and operate the heating function:

  1. Start the vehicle engine.
  2. Activate the rear window defroster button. The mirror heaters are typically on the same circuit as the rear defroster.
  3. After a few minutes, carefully touch the mirror surface. It should feel warm.
  4. Important: Do not run the heater for more than 10-15 minutes on a dry surface during testing to prevent overheating. If your specific mirror type does not include heated functions, you can disregard this section.

6. Maintenance

  • Cleaning: Clean the mirror surface with standard automotive glass cleaner and a soft, lint-free cloth. Avoid abrasive cleaners or tools that could scratch the glass.
  • Inspection: Periodically check the mirror for any cracks or damage. Replace immediately if damaged to ensure clear visibility.
  • Electrical Connections: If you experience issues with the heating function, ensure the electrical connections behind the mirror are secure and free from corrosion.

7. Troubleshooting

Issue: Mirror does not fit correctly.

  • Check Compatibility: Ensure the mirror glass is specifically designed for your exact vehicle model and year (VW Golf MK6, 2009-2012). Some Golf variants (e.g., Golf Plus, specific GTI trims) might have slightly different mirror housings.
  • Verify Orientation: Confirm you have the correct mirror for the intended side (Left/Right).
  • Contact Support: If you are certain of compatibility and still face issues, contact customer support with your Vehicle Identification Number (VIN) and photos of your original mirror.

Issue: Heated function is not working.

  • Check Connections: Ensure the electrical connectors are securely attached to the terminals on the back of the mirror glass.
  • Vehicle Defroster: Verify that your vehicle's rear window defroster is functioning correctly, as the mirror heaters typically share this circuit.
  • Fuse Check: Consult your vehicle's owner manual to locate and check the fuse for the rear defroster/mirror heating system.
  • Product Type: Confirm that the specific mirror glass you purchased includes the heated function.

8. User Tips

  • Double-Check Fitment: Before starting installation, compare the new mirror glass with your old one to ensure it's the correct size and shape for your specific Golf MK6 model.
  • Gentle Pressure: When installing, apply even, gentle pressure around the edges until you hear the clips engage. Avoid pressing directly on the center of the glass.
  • Test All Functions: After installation, always test both the mirror adjustment and heating functions (if applicable) before driving.

9. Compliance Information

This product's quality management system complies with ISO 9001:2015 standards.

10. Support & Contact

If you have any questions about fitment or installation, or require further assistance, please contact the manufacturer or seller before installation. Providing your Vehicle Identification Number (VIN) and clear photos of your original mirror glass (front and back) can help expedite support.

Manufacturer: OEMASSIVE Auto Parts Co., Ltd

Email: customer@oemassive.cn

EU Authorized Representative: Lefeng Technology GmbH

Email: lefeng.tech@outlook.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.