SinoTrack ST-915

Contents

SinoTrack ST-915 GPS Tracker User Manual

Model: ST-915

1. Introduction

Thank you for purchasing the SinoTrack GPS tracker. This manual provides detailed instructions on how to operate the device smoothly. Please read it carefully before use. Updates to this manual may occur without prior notice, with the latest version released alongside product sales. The manufacturer is not responsible for any errors or omissions in this manual.

The SinoTrack GPS tracker operates on existing GSM/GPRS networks and GPS satellites. It enables location tracking and monitoring of remote targets via SMS, mobile application, and the internet. The device utilizes advanced GPS and AGPS dual positioning technology.

SinoTrack ST-915 GPS Tracker with smartphone showing tracking interface
SinoTrack ST-915 GPS Tracker shown alongside a smartphone displaying its real-time tracking interface.
Features of 4G GPS Tracker
Key features of the 4G GPS Tracker: Real-time Tracking, History Route Playback, Waterproof, Geo-fence, Overspeed Alarm, Shocking Alarm, Sleep Mode, Built-in 10000mAh Battery, Free APP, Built-in Powerful Magnet.
Notice regarding 2G network shutdown and 4G upgrade
Important notice: 2G networks are being phased out. 4G offers faster, stronger, and better performance. Consider upgrading to a 4G model.

2. Hardware Description

The ST-915 model features a compact design with essential ports and indicators.

ST-915 Hardware Description
Close-up view of the ST-915 hardware, highlighting the Card Slot, Charge port, and OFF/ON button.

Indicator Light Status

Indicator Light StatusMeaning
Yellow light - SolidGPRS connection
Yellow light - FlashNo GPRS signal
Blue light - SolidGPS connection
Blue light - FlashNo GPS signal

3. Setup

SIM Card Installation Guide

Only GSM SIM cards are compatible with this model. If using a 3G or 4G card, ensure it supports GSM functionality. The SIM card must not have a PIN code enabled.

SIM Card Types Compatibility
Illustrations of Normal SIM, Micro SIM, and Nano SIM cards, indicating compatibility. Ensure your SIM card is compatible and does not have a PIN code.

Turning On the Device

  1. Open the rubber cover and insert the SIM card (chip facing up) into the slot.
  2. The indicator light will illuminate when the SIM card is inserted.
  3. The device will acquire a GPS location if a GPS signal is available, or an LBS location if there is no GPS signal.
  4. The device automatically powers off when the SIM card is removed.

Admin Number Setting

To set an admin number, send an SMS command to the tracker's SIM card number. This number will receive alerts for over-speed, shake sensor, or low battery alarms.

  • Command: phone number+password 1 (Your mobile phone number, not the tracker's SIM card number).
  • Example: 132657901800000 1
  • Reply: SET OK!
  • To Cancel Admin Number: D101#
  • Reply: SET OK!

APN (Access Point Name) Configuration

Each SIM card carrier has its own APN settings. You can find your APN content by checking your SIM card carrier's website or by inserting the SIM card into a mobile phone.

  • To set APN: Send SMS 8030000 APN (Replace APN with your carrier's Access Point Name).
  • Example (MTN SIM card, South Africa): APN name: internet. Send SMS: 8030000 internet
  • If APN requires Username and Password: Send SMS 8030000 APN APNuser APNpassword
  • Example (Tesco Mobile SIM card, UK): APN name: prepay.tesco-mobile.com, Username: tescowap, Password: password. Send SMS: 8030000 prepay.tesco-mobile.com tescowap password

Server IP and Port Setting

To set the tracker to the SinoTrack server:

  • Command: 8040000 IP PORT
  • Example: 8040000 45.112.204.246 8090

Website and Application Setup

You can track your device via the SinoTrack website or mobile application.

  • Website: Pro.SinoTrack.com
  • User Name: The ID number on your tracker.
  • Password: 123456 (default)

For mobile tracking, search for "SinoTrack PRO" on the App Store (iOS) or Google Play (Android), or scan the QR code below:

QR Code for SinoTrack PRO App
Scan this QR code to download the SinoTrack PRO application for Android or iOS.

If you have multiple SinoTrack GPS trackers and wish to manage them under a single account, please contact SinoTrack support to set up a multi-device monitoring account.

4. Operating Instructions

SMS Tracking

To get the device's location via SMS:

  • Call the SIM card phone number in the tracker, and you will receive a Google Maps link of its position.
  • Alternatively, send the message 6690000 to the SIM card phone number in the tracker.

Example SMS Reply:
http://maps.google.com/maps?q=+22.64212,+114.1814 Date: 2017-12-6 Time:1:45 ID: 6170999999 Fix:V Speed:0.0KM/H Bat:80%

Device Working Modes

The tracker has three working modes, affecting battery life and tracking behavior. (Note: 4G models may have 20% less battery life compared to 2G estimates.)

SinoTrack GPS Tracker Working Modes
Diagram illustrating the three working modes: WORK (continuous), MOVE (motion-activated), and STANDBY (SMS/Call activated), with estimated battery life.
  1. WORK - Keep Working Mode: The tracker continuously works and sends data at set time intervals.
    • Battery Life: Approximately 7 days per 10000mAh.
    • Command: WORK0000
    • Reply: SET OK!
  2. MOVE - Work When Moving Mode (Factory Default): The tracker only works when it is moving. When stationary, it enters sleep mode, GPS shuts off, and GSM operates in low consumption mode. Vibration, SMS commands, or calling the tracker can wake it up for 5 minutes.
    • Battery Life: Approximately 30 days per 10000mAh.
    • Command: MOVE0000
    • Reply: SET OK!
  3. STANDBY - SMS or Call to Tracker Mode: The tracker remains in a deep sleep state. SMS or calls will activate it for 5 minutes.
    • Battery Life: Approximately 120 days per 10000mAh.
    • Command: STANDBY0000
    • Reply: SET OK!

Alarm Settings

  • Over-speed Alarm Setting:
    • Command: 1220000 070 (Sets alarm at 70 km/h).
    • Reply: SET OK!
    • If the unit speed exceeds the set limit, it will send "speed alarm!" to the admin number every 5 minutes.
    • To Cancel Over-speed Alarm: 12200000
    • Reply: SET OK!
  • Shake Alarm Setting:
    • Keep the tracker stationary for 5 minutes for this function to work. The tracker will send "Shock alarm!" to the admin number when it detects a shock.
    • Command: 1810000T10
    • Reply: SET OK!
    • To Cancel Shake Alarm: 1800000
    • Reply: SET OK!
  • Take Off Alarm Setting (Factory default is ON):
    • The device has an anti-removal induction sensor on its back. If this sensor is uncovered, it will send "Take off Alarms!" to the admin and SOS numbers via SMS.
    • Command: TAKEOFF0000 1 (To enable)
    • Reply: SET OK!
    • To Cancel Take Off Alarm: TAKEOFF0000 0
    • Reply: SET OK!

Terminal (Local) Time Setting

The factory default time setting is GMT 0.

  • Command: 8960000E00 (Sets GMT 0)
  • Reply: SET OK!
  • Example for other time zones: 8960000E01 (GMT +1), 8960000W01 (GMT -1)

Reset Hardware

  • Command: RESET
  • Reply: SET OK!

Read Configuration Data

To read the current configuration data of the tracker:

  • Command: RCONF
  • Reply: The tracker will reply with its ID, work mode, IP and Port, and APN settings.

Explanation of Parameters in SMS Message:

  • ST-915: Model of the tracker.
  • ID:6180127780: The unique ID of the GPS Tracker.
  • UP:0000: The password for SMS commands.
  • U1:,U2:,U3:: Control numbers.
  • MODE: GPRS-MOVE: GPS work mode (e.g., MOVE mode).
  • DAILY:OFF, GEO FENCE:OFF, OVER SPEED:OFF, VOICE:ON, SHAKE ALARM:OFF, SLEEP:ON: Status of various tracker features.
  • APN: internet: APN of the SIM Card.
  • IP:45.112.204.246:8090: The IP address and Port of the tracker server.
  • GPRS UPLOAD TIME:30: The GPS time interval for data upload (in seconds).
  • TIME ZONE:0.0: Time zone of the tracker.

5. Specifications

ContentSpecifications
Model NameST-915
Dimensions (ST-915)80*68*40mm
Weight300g
NetworkGSM/GPRS (Supports 2G/4G SIM cards with GSM function)
Band850/900/1800/1900Mhz
GPS Sensitivity-159dBm
GPS Accuracy5m
Charging InputDC 5V==1.0A
Battery (ST-915)3.7V 10,000mAh Li-ion battery
Standby Time (ST-915)120 days (in STANDBY mode)
Storage Temperature-40°C to +85°C
Operation Temperature-20°C to +55°C
Humidity5%--95% non-condensing
Special FeaturesInternet Connected, Waterproof, Built-in Powerful Magnet
CertificationCE, FCC
ST-915 Optional Accessories Table
Table detailing optional accessories for the ST-915, including network type, car charger availability, voice monitoring, built-in battery capacity, and packaging options.
ST-915 with Built-in Magnets
Image illustrating the ST-915 tracker's built-in 5-piece strong powerful magnetic base, allowing for easy installation without additional tools.

6. Maintenance

Battery Information

The ST-915 is equipped with a built-in 3.7V 10,000mAh Li-ion battery. Battery life varies significantly depending on the selected working mode:

  • WORK mode: Approximately 7 days.
  • MOVE mode: Approximately 30 days.
  • STANDBY mode: Approximately 120 days.

Ensure the device is charged using a DC 5V==1.0A input.

ST-915 Battery Information
Image highlighting the ST-915's built-in 3.7V 10000mAh Li-ion battery, capable of up to 30 days standby.

General Notices

  • GPS tracking functions best outdoors.
  • Ensure the GSM SIM card supports making calls, sending messages, and GPRS network access.
  • Verify the SIM card has sufficient balance.
  • Confirm the GSM card has call display enabled and call forwarding turned off.
  • Insert the GSM phone card correctly.
  • Do not attempt to assemble or disassemble the device.

7. Troubleshooting (FAQ)

FAQInstructions/Solutions
Fail to turn it onPlease check if the battery is charged.
Please check if the SIM card is installed correctly.
Please check if the SIM card is a GSM network card.
No GSM signalDo not turn on the PIN code.
Ensure no calls are diverted.
Please check if the voltage of the power is normal.
No GPS signalA more open view of the sky is recommended to ensure the device can receive the GPS signal normally.
No reply to SMSPassword is wrong or the SMS format is wrong.
No reply to calling & No alarm messageAuthorized / admin phone number is incorrect or has not been set up.
SMS position OK, cannot use the APP and web platformPlease check if APN is correctly set. Find the correct APN content for your SIM card (refer to Section 3: APN Configuration).
Platform position is different from the actual position.No upload position time or GPS signal: call the device phone number and receive the position message. If it has no GPS signal, the position is the last GPS positioning location. If it has a GPS signal, it means the device hasn't reached the uploading time.

8. User Tips

  • Initial Setup: The device often comes unconfigured. Carefully follow the setup steps, especially for SIM card installation, APN settings, and admin number setup.
  • Battery Life Optimization: For extended battery life, utilize the 'MOVE' mode (motion-activated) or 'STANDBY' mode (SMS/call activated). Continuous 'WORK' mode will drain the battery faster.
  • SIM Card Requirements: Always ensure your SIM card is a GSM card, has sufficient balance, and does not have a PIN code enabled. GPRS functionality is essential for online tracking.
  • Troubleshooting: If you encounter issues, double-check your SMS commands for correct format and password. For location discrepancies, verify APN settings and ensure the device has a clear view of the sky for GPS signal acquisition.
  • Support: If you face complex configuration challenges, the seller has been noted to be responsive and helpful in resolving questions.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official SinoTrack website or contact the seller directly. If you require assistance with managing multiple SinoTrack devices under a single account, please reach out to SinoTrack customer service.

A comprehensive user manual in PDF format is available for download: SinoTrack GPS Tracker User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.