1. Important Safety Information
Please read all safety warnings and instructions carefully before installation and use.
- ATTENTION: Not suitable for children under three years.
- ATTENTION: Do not swallow small parts, to prevent choking.
- ATTENTION: Do not disassemble the product to prevent electric shock or damage to the vehicle.
- Ensure the vehicle's ignition is off and the battery is disconnected before performing any electrical work.
2. Product Overview
This manual provides instructions for the XINTUSHENG LED Side Marker Light assembly, designed as a direct replacement for the front bumper side marker lights on Ford F-150 SVT Raptor models manufactured between 2010 and 2014.
Figure 1: XINTUSHENG LED Side Marker Light and compatible vehicle.
Package Contents:
- 2 x LED Side Marker Light Assemblies (Available in Clear or Smoked Lens)
- 1 x Installation Tool (Plastic Pry Tool)
3. Installation Guide
This product features a plug-and-play design for easy installation. No computer reprogramming is required.
Tools Required:
- Included plastic pry tool
- Basic hand tools (optional, depending on vehicle access)
Figure 2: Included installation tool.
Installation Steps (T10 Connection Method):
- Locate the original side marker light assembly on your vehicle's front bumper.
- Carefully use the provided pry tool to remove the existing side marker light.
- Disconnect the OE connector from the original halogen bulb.
- Remove the OE halogen bulb from its socket.
- Insert the connector from the new LED side marker light into the OE socket.
- Securely place the OE socket back into the new LED light assembly to ensure a watertight seal and prevent water ingress.
- Carefully snap the new LED side marker light assembly into its housing on the bumper until it is securely seated.
- Repeat the process for the other side.
- Test the lights by turning on your vehicle's parking lights or headlights.
Figure 3: T10 Connection Method Diagram.
4. Operating Instructions
These LED side marker lights function as running position lights and will illuminate automatically when your vehicle's parking lights or headlights are activated. They are designed to provide enhanced visibility and a modern aesthetic.
Figure 4: Illuminated LED side marker light on a Ford F-150.
5. Maintenance
The LED side marker lights are designed for durability and minimal maintenance. They are 100% waterproof with an IP67 rating, making them resistant to rain, fog, and wet weather conditions.
Figure 5: IP67 Waterproof rating.
- Cleaning: Clean the lens with a soft cloth and mild soap and water as needed. Avoid abrasive cleaners or solvents that could damage the lens material.
- Inspection: Periodically check the lights for any signs of damage or loose connections.
6. Troubleshooting
- Lights Not Working:
- Ensure all connections are secure and properly seated.
- Check the vehicle's fuse box for any blown fuses related to the parking lights or exterior lighting.
- Verify that the vehicle's lights are turned on.
- Error Messages: These lights are designed to be