1. Product Overview
This product is a high-precision, high-gloss chrome trim piece, manufactured using premium ABS plastic base material combined with advanced vacuum chrome plating technology. It features a mirror-like finish, excellent corrosion resistance, and anti-aging properties. It is widely used for Automotive Interior & Exterior Modification (Dashboards, Door Handles, Grilles).
Key Features:
- Mirror High-Gloss Finish: Instantly upgrades the visual class and luxury feel of your vehicle or device.
- Superior Weather Resistance: Designed to withstand UV exposure, rain, and extreme temperatures without fading or oxidizing.
- Custom Fit & Easy Install: Features precise 3M adhesive backing tailored for specific car models, ensuring a perfect fit without drilling.
- Eco-Friendly Material: Made from non-toxic materials, fully compliant with EU RoHS and REACH standards.
Package Contents:
- High-Gloss Chrome Trim Piece(s) (26 pieces)
- Pre-applied 3M Automotive Adhesive Tape

2. Safety Information & Warnings
Warning: Please read the following safety warnings carefully before installation:
- Driving Safety: NEVER attempt installation while the vehicle is in motion. Install only when the vehicle is stationary and parked in a safe area.
- Visibility Obstruction: After installation, carefully check that the trim does not obstruct the mirror's field of view or interfere with the visibility of turn signals. If any obstruction occurs, discontinue use and remove the trim immediately.
- Surface Preparation: The installation surface must be thoroughly cleaned and completely dry. Oil, dust, or moisture on the surface will prevent proper adhesion, causing the trim to detach while driving, which poses a safety hazard.
- Temperature Limits: Installation is recommended at ambient temperatures above 15°C (59°F). Low temperatures reduce the adhesive strength of the 3M tape. Avoid washing the car or exposing it to rain for 24-48 hours after installation to allow the adhesive to fully cure.
- Non-Structural Component: This product is for aesthetic decoration only. It provides no structural support or safety protection functions.
WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or play pens. This bag is not a toy.
3. Installation Steps
- Clean the Surface:
- Use an alcohol wipe or a dedicated cleaner to thoroughly wipe the area where the trim will be applied.
- Ensure the surface is free of oil, wax, dust, and moisture. Allow it to dry completely.
- Dry Fit (Test Positioning):
- Without peeling off the protective film from the adhesive, place the trim on the mirror to test the fit.
- Once the position is confirmed to be accurate and perfect, lightly mark the position with your finger for quick alignment during final installation.

Figure 2: Various trim pieces for dry fitting and identification. - Peel the Adhesive Backing:
- Carefully peel off the 3M adhesive protective film from the back of the trim.
- Caution: Once the film is removed, do not let the adhesive surface touch any object or your fingers, as this will reduce its stickiness.

Figure 3: View of trim pieces with 3M adhesive backing. - Apply and Secure:
- Align the trim precisely with the marked position on the mirror.
- Press firmly from the center outwards for 30-60 seconds to ensure full contact between the adhesive and the surface, removing any air bubbles.

Figure 4: Example of a trim piece securely installed. - Curing Time:
- After installation, avoid washing the car, exposure to rain, or high-pressure water jets on the area for 24 to 48 hours.
- This allows the 3M adhesive to reach maximum bonding strength.
4. Usage Limits & Maintenance
- Automatic Car Washes: Although the bond is strong, avoid automatic brush car washes for the first week after installation to prevent bristles from lifting the edges.
- Chemical Cleaners: When cleaning the vehicle, avoid using cleaners containing strong solvents, abrasives, or acids directly on the trim surface, as they may damage the chrome finish. Use a neutral pH car wash soap instead.
- Damage Handling: If the trim becomes cracked, broken, or severely faded, replace it promptly to prevent debris from falling off and affecting driving safety.
- Removal Instructions: If removal is necessary, use a hairdryer to heat the adhesive to soften it, then peel slowly. Any remaining adhesive residue can be cleaned with a dedicated adhesive remover.
- Installation Risk: Improper installation (e.g., on a dirty surface) may cause the trim to fall off. We are not responsible for damages caused by incorrect installation.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Trim not adhering properly | Improper surface cleaning (oil, wax, dust, moisture); low installation temperature; insufficient curing time. | Ensure surface is thoroughly clean and dry. Install above 15°C (59°F). Allow 24-48 hours for adhesive to cure before exposure to moisture/washing. |
| Trim obstructs visibility or signals | Incorrect positioning during installation. | Discontinue use and remove the trim immediately. Re-install carefully, ensuring no obstruction. |
| Chrome finish damage (fading, cracking) | Exposure to harsh chemical cleaners; physical damage. | Use only neutral pH car wash soap. Replace damaged trim promptly to maintain safety and aesthetics. |
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Cherk |
| Item Type | Chromium Styling |
| Material | Stainless steel |
| Car Model Compatibility | For Lexus RX330 RX350 RX400H 2004-2009 |
| Model Year | 2004, 2005, 2006, 2007, 2008, 2009 |
| External Testing Certification | CCC |
| Item Weight | 5kg |
| Origin | Mainland China |
| Package Quantity | 26 Pieces |
7. User Tips
- For optimal adhesion, ensure the installation surface is completely dry and free of any residue. A thorough cleaning with rubbing alcohol is highly recommended.
- Perform a dry fit for all pieces before peeling the adhesive to confirm placement and avoid misalignments.
- While the product provides a mirror-like chrome finish, consider if a black color option is available from the seller if you prefer a different aesthetic.
8. Additional Resources & Support
For further details and documentation, you may refer to the official user manual PDF:
For any product-related inquiries or support, please contact the seller directly.