NB ERGONOMIC NB-F300

Contents

NB F150 Gas Spring Monitor Wall Mount

Model: NB-F300 | Brand: NB ERGONOMIC

Instruction Manual

1. Introduction

This manual provides instructions for the safe and proper installation and operation of your NB F150 Gas Spring Monitor Wall Mount. This full-motion, dual-arm mount is designed to support LCD/TV screens between 24 and 35 inches, with a weight capacity of 3-12 kg (6.6-26.4 lbs). It features a gas spring mechanism for smooth and effortless adjustments, enhancing your viewing experience and ergonomic comfort.

NB F150 Gas Spring Monitor Wall Mount with a monitor attached
Product overview of the NB F150 Gas Spring Monitor Wall Mount, highlighting its 3-12kg weight capacity and compatibility with 24-35 inch screens.

2. Safety Information

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury, property damage, or voiding your warranty.

  • Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
  • Do not exceed the maximum load capacity of 12 kg (26.4 lbs).
  • Use appropriate tools and follow all steps carefully.
  • Keep children and pets away during installation.
  • Periodically check all connections and fasteners to ensure they remain secure.

3. Package Contents

The package includes one (1) NB F150 Gas Spring Monitor Wall Mount and all necessary mounting hardware. A bubble level is included to assist with installation.

4. Specifications

Feature Specification
Model Number NB-F300
Screen Size Compatibility 24 - 35 inches
Weight Capacity 3 - 12 kg (6.6 - 26.4 lbs)
VESA Compatibility 75x75mm, 100x100mm
Adjustment Type Full-Motion, Gas Spring
Installation Type Wall Mounting
Vertical Lift Distance 0 - 195 mm
Profile (Min-Max Distance from Wall) 100 mm - 445 mm
Tilt Angle +85° (up) / -30° (down)
Swivel Angle 180° (left/right)
Screen Rotation 360°
Bubble Level Included Yes

5. Setup and Installation

Refer to the detailed user manual PDF for comprehensive step-by-step installation instructions, including wall mounting procedures and hardware selection. A digital copy of the user manual is available at: User Manual (PDF).

Key Installation Steps:

  1. **Mounting the Wall Plate:** Securely attach the wall plate to your desired wall location using appropriate fasteners for your wall type. Use the included bubble level to ensure it is perfectly horizontal.
  2. **Attaching the Arm:** Connect the gas spring arm to the wall plate.
  3. **Attaching the VESA Plate to Monitor:** Secure the VESA plate to the back of your monitor. Ensure the VESA pattern (75x75mm or 100x100mm) matches your monitor.
  4. **Mounting Monitor to Arm:** Carefully attach the monitor (with VESA plate) to the end of the gas spring arm.
  5. **Initial Arm Adjustment:** After mounting the monitor, you may need to adjust the gas spring tension. The arm might be too rigid or too loose initially.

For Monitors Without VESA Holes:

If your monitor does not have VESA mounting holes, you will need an additional adapter kit (e.g., F80 + FP-1(H1) or similar universal non-VESA adapter). These mounts typically clamp onto the screen, allowing it to be attached to the monitor arm.

6. Operating Instructions

Adjusting Monitor Position:

  • **Vertical Lift:** Gently push or pull the monitor up or down to adjust its height within the 195mm range.
  • Diagram showing 195mm vertical lifting distance of the monitor arm
    The monitor arm allows for 195mm of vertical height adjustment.
  • **Tilt:** Tilt the monitor screen up to +85 degrees or down to -30 degrees to find your optimal viewing angle.
  • Diagram illustrating monitor tilt angles of +85 degrees up and -30 degrees down
    Monitor tilt adjustment range: +85 degrees up and -30 degrees down.
  • **Swivel:** Rotate the monitor arm left or right up to 180 degrees.
  • **Screen Rotation:** The VESA plate allows for a full 360-degree rotation of the screen, enabling easy switching between landscape and portrait orientations without frequent mouse usage.
  • Diagram showing 360 degree screen rotation on the monitor arm
    The monitor can be rotated 360 degrees for flexible viewing.

Torque Adjustment:

The gas spring arm's tension (torque) can be adjusted to match your monitor's weight. This ensures the arm holds the monitor securely in place and allows for smooth movement.

  • **To Increase Torque (if monitor slides down):** Use a hex key to turn the adjustment screw towards the "+" direction.
  • **To Reduce Torque (if monitor goes up automatically):** Use a hex key to turn the adjustment screw towards the "-" direction.
Diagram showing how to adjust torque on the monitor arm with a hex key
Adjusting the torque with a hex key to fine-tune the arm's tension.

7. Maintenance

  • Keep the mount clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners.
  • Periodically check all screws and bolts to ensure they are tight and secure.
  • Do not lubricate the gas spring mechanism.

8. Troubleshooting

Common Issues and Solutions:

Issue 1: The arm is too rigid, I couldn't move or press it.
Solution: For NB gas spring arm mounts, you need to finish the installation first and attach the monitor onto the mount. Then, clamp the screen to press the arm. The gas spring requires the weight of the monitor to activate properly.
Issue 2: The torque adjustment hole is not accessible.
Solution: First, finish the installation and attach the monitor onto the mount. Second, press the arm down. The torque adjustment hole should then become accessible. Do not attempt to adjust torque by hand before installation is complete and the monitor is mounted.
Issue 3: The VESA plate is not in the correct position (e.g., not rotating easily).
Solution: The VESA plate is designed to rotate 360 degrees. To adjust its position, firmly grasp the screen and rotate it. It might be stiff initially but should rotate with applied force.
Issue 4: The arm couldn't stay down; it goes up automatically.
Solution: The cause is that the torque is too much for your monitor's weight. Please reduce the torque by turning the adjustment screw towards the "-" direction (refer to 'Torque Adjustment' in Section 6).
Issue 5: The arm couldn't stay up; it goes down automatically.
Solution: The cause is that the torque is too little for your monitor's weight. Please increase the torque by turning the adjustment screw towards the "+" direction (refer to 'Torque Adjustment' in Section 6).

9. User Tips

  • **Optimal Ergonomics:** Take advantage of the full-motion capabilities to position your monitor at eye level and an arm's length away to reduce neck and eye strain.
  • **Cable Management:** Utilize any integrated cable management features on the arm to keep your workspace tidy and prevent cable damage.
  • **Initial Setup Patience:** The gas spring mechanism might feel stiff or loose before the monitor is fully installed and the torque is properly adjusted. Follow the installation steps completely before making final tension adjustments.
  • **Check VESA Compatibility:** Before purchasing, always verify your monitor's VESA pattern (75x75mm or 100x100mm) to ensure compatibility.

10. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official product documentation or contact the manufacturer directly. The full user manual (PDF) contains additional details and can be accessed via the link provided in Section 5.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.