Product Introduction
This electric lint remover efficiently removes lint, fuzz, pills, and bobbles from various fabrics including clothing, sweaters, blankets, curtains, socks, and plush items. It features sharp stainless steel blades, strong suction power, low noise operation, and a detachable lint container. Designed for safe, gentle, and easy use, it helps keep your fabrics smooth and looking new.
Package Contents
Please check the package to ensure all items are present:
- Main unit (Electric Lint Remover)
- Cleaning brush
- USB charging cable (for rechargeable version)
- User manual
Setup
1. Charging (Rechargeable Version)
Connect the USB cable to a 5V power source (e.g., a USB wall adapter, computer USB port, or power bank). The indicator light on the device will turn on during charging and turn off once fully charged. A full charge typically takes 1-2 hours and provides approximately 90 minutes of use.
Operating Instructions
1. Preparation
- Ensure the lint remover is fully charged.
- Place the fabric on a flat and smooth surface to ensure even contact and prevent damage.
2. Operation
- Turn on the power switch.
- Gently move the lint remover horizontally over the fabric surface.
- Do not press too hard to avoid damaging clothes.
Safety Warnings
- Keep away from hair, fingers, and loose threads during use to avoid injury.
- Do not use on thin, fragile, knitted, or damaged fabrics.
- Do not use in wet conditions or wash the main unit with water.
- Keep out of reach of children.
- Do not disassemble the device by yourself.
- Stop using if the blade is damaged or the body is broken.
Maintenance
1. Cleaning the Lint Box
- Turn off the device.
- Open the lint container.
- Use the provided cleaning brush to remove collected fuzz and dust.
- Reinstall the container before next use.
2. General Care & Storage
- Clean the blade and container after each use.
- Store in a dry and cool place.
- Fully charge the device before long-term storage.
- Do not expose to high temperature or direct sunlight.
Troubleshooting
- Low power or slow rotation: Charge the battery or replace batteries (if applicable for battery-operated models).
- Poor lint removal: Clean the blade and container; check if blades are dull and consider replacement if necessary.
- No power: Check the power switch and charging connection.
Specifications
| Attribute | Detail |
|---|---|
| Product Name | Electric Lint Remover |
| Model Number | MQXJQ01KL |
| Brand | XIAOMI MIJIA |
| Blade Material | Stainless steel (5 blades cyclone floating head) |
| Power Source | USB rechargeable / Battery operated (optional) |
| Battery Capacity | 1300mAh (rechargeable version) |
| Charging Time | 1-2 Hours |
| Usage Time | Up to 90 minutes |
| Material | ABS + Stainless steel |
| Function | Lint removing, fabric caring, fuzz cleaning |
| Features | High efficiency, safe, detachable, easy to clean, 0.35mm micro-arc steel mesh, negative pressure centrifugal fan blades, anti-backflow air duct design, double protection safety switch, hidden indicator light, visible fuzz bin. |
| Dimensions | 145mm x 62mm x 65mm |
| Net Weight | 213g |
| Input Parameters | 5V==1A |
| Rated Voltage | DC3.7V |
| Rated Power | 2W |
| Certifications | CE, FCC, RoHS |
User Tips
- For best results, move the lint remover gently and steadily over the fabric surface. Avoid moving it too quickly.
- Apply light pressure when dealing with larger lint or pills to ensure effective removal.
- The charging port is Micro-USB, not USB Type-C.
- When purchasing replacement blades, ensure they are compatible with the XIAOMI MIJIA Lint Remover. Some third-party 'five leaves neutral remover heads' are compatible.
- Always ensure the battery is sufficiently charged for optimal performance and consistent rotation speed.
Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the official XIAOMI MIJIA website or contact your local authorized dealer. Keep your purchase receipt as proof of purchase.