1. Introduction
This manual provides detailed instructions for the Ziqqucu TP4056 Type-C USB Lithium Battery Charger Module. This compact and efficient module is designed for charging single-cell lithium-ion batteries, such as 18650 cells, and includes essential protection features. It features a convenient Type-C USB input for power supply and dedicated terminals for battery and load connections.
2. Safety Information
- Always ensure correct polarity when connecting the battery and load to prevent damage to the module or battery.
- Use a stable 5V power supply for charging. Exceeding the recommended input voltage can damage the module.
- Do not short-circuit the battery or output terminals.
- Handle the module with care to avoid electrostatic discharge.
- Keep out of reach of children.
- If you are unsure about any connection, consult a qualified professional.
3. Product Overview
The Ziqqucu TP4056 module is a versatile charging solution for single-cell lithium batteries. It integrates a TP4056 charging IC and an 8205A dual MOSFET for battery protection, offering overcharge, over-discharge, and overcurrent protection. The module features a Type-C USB port for input power, and clearly marked pads for battery and load connections.


Key components include:
- Type-C USB Port: For input power (5V).
- TP4056 IC (U1): The main charging controller.
- 8205A Dual MOSFET (U2): Provides battery protection functions.
- B+ / B- Pads: Connect to the positive and negative terminals of the lithium battery.
- OUT+ / OUT- Pads: Connect to the positive and negative terminals of the load (e.g., a device powered by the battery).
- Indicator LEDs:
- Red LED: Indicates that the battery is currently charging.
- Green LED: Indicates that the battery is fully charged.
- No light: Indicates no load or no power input.
4. Specifications
The following table details the technical specifications of the TP4056 Type-C USB Lithium Battery Charger Module. For a visual representation of these specifications, please refer to Figure 4.1.

| Feature | Specification |
|---|---|
| Input Voltage | 4.35V - 6V (Recommended 5V) |
| Charge Cut-off Voltage | 4.2V ± 1% |
| Maximum Charging Current | 1000mA (1A) |
| Battery Overcharge Protection Voltage | 4.28V |
| Battery Overcharge Boost | 4.00V |
| Battery Discharge Protection Voltage | 3.0V |
| Battery Discharge Termination Voltage | 3.2V |
| Battery Overcurrent Protection Current | 3A |
| Board Size | Approx. 2.5 cm x 1.65 cm |
| Charging Indicator | Red (Charging), Green (Full), Off (No Load) |
| Interface | Type-C USB |
| Package Type | SMD |
5. Setup and Connection
Follow these steps to correctly set up and connect your TP4056 charging module:
- Connect Battery: Solder the positive terminal of your 18650 (or other single-cell lithium-ion) battery to the B+ pad on the module. Solder the negative terminal of the battery to the B- pad. Ensure correct polarity.
- Connect Load (Optional): If you intend to power a device directly from the battery through the module's protection circuit, solder the positive input of your device to the OUT+ pad and the negative input to the OUT- pad. This ensures the load benefits from the module's over-discharge and overcurrent protection.
- Connect Power Supply: Plug a 5V Type-C USB cable into the module's Type-C port. Connect the other end of the cable to a suitable 5V USB power adapter (e.g., a phone charger).
Important: Always double-check all connections for correct polarity before applying power to avoid damage.
6. Operation
Once the battery and power supply are connected:
- The Red LED will illuminate, indicating that the battery is actively charging.
- When the battery reaches its full charge capacity (4.2V), the Green LED will illuminate, and the Red LED will turn off. This signifies that charging is complete.
- If no battery is connected or the module is not powered, no LEDs will be lit.
- The integrated protection circuit will automatically cut off output if the battery voltage drops below the discharge protection voltage (3.0V) or if the current draw exceeds 3A, protecting the battery from damage.
7. Troubleshooting
- No LED activity when power is connected:
- Check if the 5V Type-C power supply is working correctly.
- Ensure the Type-C cable is fully inserted and functional.
- Verify that the battery is correctly connected to B+ and B- with correct polarity.
- Confirm the battery is not completely dead (below 3.0V), which might prevent the charger from initiating.
- Red LED stays on, Green LED never lights up:
- The battery might be faulty or severely degraded and unable to reach full charge.
- The charging current might be too low for the battery capacity, leading to very long charge times.
- No output from OUT+/OUT- terminals:
- Ensure the battery is charged and connected.
- Check if the battery voltage is above the discharge protection voltage (3.0V).
- Verify that the load is not drawing more than 3A, which would trigger overcurrent protection.
- Confirm the load is correctly connected to OUT+ and OUT-.
8. Maintenance
- Keep the module clean and free from dust and moisture.
- Avoid exposing the module to extreme temperatures or direct sunlight.
- Do not attempt to modify the circuit board, as this may void any implied warranty and could lead to malfunction or safety hazards.
- Regularly inspect solder joints for any signs of corrosion or damage.
9. User Tips
- For optimal performance and safety, always use high-quality lithium-ion batteries.
- Consider adding a heatsink if the module is used for continuous high-current charging, although for 1A charging, it typically runs cool.
- When integrating into a project, ensure proper ventilation around the module.
- If using multiple modules, ensure each has its own dedicated battery and power supply, or that the shared power supply can handle the combined current draw.
10. Further Resources
For a more detailed technical document or additional information, please refer to the official user manual PDF:
11. Warranty and Support
For any questions, technical assistance, or support regarding your Ziqqucu TP4056 Lithium Battery Charger Module, please contact the seller or manufacturer directly. Please retain your purchase records for any warranty claims.