1. Product Overview
The Aqara Smart Door Lock A100 Pro is an advanced smart door lock offering multiple unlocking methods and smart home integration. It supports fingerprint, password, temporary password, NFC card, APP control, Apple Home Key, and mechanical key unlocking. This lock enhances home security and convenience with features like low-battery reminders, lock pry warnings, repeated verification failure warnings, and door unclosed/unlatched warnings.
It integrates seamlessly with the Aqara ecosystem and Apple HomeKit, utilizing Zigbee and Bluetooth 5.0 for connectivity. A hub is required for automations and other advanced functions.

Aqara Smart Door Lock A100 Pro with key features highlighted.
Key Features:
- Multiple Unlocking Methods: Fingerprint, Password, Temporary Password, NFC Card, APP Control, Apple Home Key, Mechanical Key.
- Advanced Security: Financial-grade fingerprint recognition (98.6% recognition rate), anti-trailing design, electromagnetic protection, tamper sensors.
- Smart Home Integration: Works with Aqara Home APP and Apple HomeKit.
- Connectivity: Zigbee and Bluetooth 5.0.
- Alerts & Warnings: Low-battery reminder, lock pry warning, repeated verification failure warning, door unclosed/unlatched warning.

The 7 available methods to unlock your Aqara Smart Door Lock.

Internal security mechanisms including anti-trailing and electromagnetic protection.
2. Setup Instructions
2.1. Preparation for Use
- Install Batteries: Open the battery cover (located on the back panel) and install 8 AA dry batteries. It is recommended to use original batteries to prevent leakage and damage.
- Reset the Lock: Press and hold the 'Reset' button for 5 seconds. Release it after hearing the voice prompt. Resetting clears all saved user data.
2.2. Lock Installation
The installation process involves professional tools and can be complex. It is highly recommended to hire qualified professionals for installation to ensure proper function and safety. Please refer to the detailed installation guide available in the PDF user manual for specific steps and templates.
For a comprehensive installation guide, please refer to the official user manual PDF: Aqara Smart Door Lock A100 Pro User Manual (PDF).
2.3. Quick Setup (App Integration)
- Add Device to Aqara Home App:
- Download 'Aqara Home' from your app store (Apple App Store, Google Play, etc.).
- Open the app, tap '+' in the upper right corner of the 'Add Accessories' page.
- Choose 'Smart Door Lock A100' and follow the in-app instructions to add the device.
- Note: The effective Bluetooth communication range is 10 meters, but it may be affected by obstacles.
- Add Users: Enter the device page in the Aqara Home app and follow instructions to add the first user (owner/administrator). The door lock cannot be locked normally without users added.
- Add Device to HomeKit (for iOS users):
- Via Apple Home App: Open Apple's Home app, click '+' in the upper right corner, and select 'Add Accessory'.
- Via Aqara Home App: In the smart lock page, go to 'General Settings', click 'Bind with HomeKit', then scan/input the HomeKit setting code (found after opening the battery compartment cover).
- HomeKit supports lock/unlock, automation setups, and door unclosed/unlatched warnings.
- Add Apple Home Key (for iOS users): After connecting with HomeKit, a key will be automatically generated in your Apple Wallet app. Use your iPhone/Watch near the lock to unlock.
2.4. Local Settings Mode
In case the Aqara Home app is inconvenient, you can briefly press the 'Setting' button under the battery cover and verify the administrator's fingerprint/password to set up the following:
- Add/remove normal users.
- Set the door lock volume.
- Reset and bind to HomeKit.
Note: Initial door lock and user setup should be completed via the Aqara Home app before using local settings mode.
3. Operating Instructions
Authentication Feedback:
- Successful: Interactive indicator flashes white, with an audible prompt (if silent mode is off).
- Failed: Interactive indicator flashes red, with an audible prompt (if silent mode is off).
3.1. Unlock by Fingerprint
- Attach your registered finger to the fingerprint identification area.
- After successful authentication, pull down the handle to open the door.
3.2. Unlock by Password
- Enter your password on the keypad and press the 'Enter' button.
- After successful authentication, pull down the handle to open the door.
3.3. Unlock by Emergency Key
- Press down to open the cover plate of the emergency keyhole.
- Insert the mechanical key and turn it to unlock.
Important: Do not keep the emergency key inside the house. Store it in a safe, accessible place outside for emergencies.
3.4. Unlock by NFC Card
- Hold the added NFC card to the recognition area.
- After successful authentication, pull down the handle to open the door.
3.5. Lift and Lock (Indoor/Outdoor)
To lock the door, simply lift up the handle after closing the door. This action engages the deadbolt for maximum security.
3.6. Double Lock (Night Latch)
From the inside, turn the 'Night Latch' knob 90° clockwise or counterclockwise to the horizontal position to engage the double lock. To disable, turn the knob 90° to the vertical position.
Note: When double-locked, regular users (fingerprints, passwords, NFC cards, mechanical key) cannot unlock the door. Only admin users (fingerprints, passwords, NFC cards), app controls, and Apple Home Key can unlock it. Pulling down the handle from inside will also unlock the door.

Status detection features including abnormal unlock, tamper, and false door warnings.
4. Maintenance
4.1. Battery Replacement
When the battery level is low, the lock will provide a low-battery warning. Replace the 8 AA batteries promptly. Failure to do so may result in the lock being unable to authenticate and open. In such cases, use the Type-C emergency power supply or the mechanical key.
4.2. General Care
- Keep the lock dry and avoid exposure to moisture or direct water contact.
- Do not place the lock near heat sources.
- Ensure proper ventilation; do not enclose the lock in a sealed casing.
- Do not attempt to repair the device yourself. All repair work should be performed by authorized professionals.
- Clean the exterior with a soft, dry cloth. Avoid abrasive cleaners.
5. Troubleshooting
- Lock Not Opening Due to Low Battery: If the batteries are completely drained, the lock will not respond to authentication. Use a Type-C power bank connected to the emergency power supply port or the mechanical emergency key to open the door.
- Lock Not Locking: Ensure that at least one user has been added to the lock via the Aqara Home app. The lock cannot be locked normally without registered users.
- Bluetooth Communication Issues: The effective Bluetooth range is 10 meters. Walls and other obstacles can interfere with the signal. Try moving closer to the lock or removing obstructions.
- General Malfunction: If the device is not functioning as expected, first remove and reinsert the batteries. If the issue persists, perform a factory reset (see Setup Instructions) and reconfigure the lock. If problems continue, contact customer support.
- Fingerprint Recognition Issues: Ensure your finger is clean and dry. Try re-registering your fingerprint if recognition is consistently poor.
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | Aqara Smart Door Lock A100 Pro |
| Model Number | ZNMS02ES |
| Dimensions | 375 × 77 × 23.6 mm |
| Net Weight | 3.6 kg |
| Operating Temperature | -25°C to 55°C |
| Operating Humidity | 0-93% RH, no condensation |
| Power Supply | 8 AA dry batteries (6V), Type-C Emergency Power Supply (5V) |
| Wireless Protocol | Bluetooth 5.0, Zigbee, NFC |
| Suitable for Mortise | 6068 |
| Fit Door Thickness | 40-120mm |
| Suitable Door Type | Steel Door, Wooden Door, Brass Door, Stainless Steel Door |
| Ways To Unlock | App, Bluetooth, Mechanical Keys, Card, Password, Fingerprint |
| Material | Stainless Steel |
| Handle Direction | Direction Reversible |
| Protection Level | No Waterproof (Indoor Use Only) |
| Certification | CE |
| Smart Home Platform | Apple HomeKit |
7. Warranty & Support
7.1. Warranty Information
The Aqara Smart Door Lock A100 Pro comes with a 1-year warranty for the main body (front panel, back panel, lock body, and lock cylinder) from the date of receipt. This warranty covers performance failures listed in the product performance failure table, as determined by the after-sales service center.
Non-Warranty Conditions:
- Unauthorized repairs, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, or incorrect use of non-product accessories.
- Torn or altered labels/anti-counterfeit marks.
- Exceeding the warranty period.
- Damage caused by force majeure.
- Failure to meet the conditions specified in the product performance failure table.
- Product or accessory failures caused by human factors.
7.2. Customer Support
- Online Customer Service: www.aqara.com/support
- E-mail: support@aqara.com
- Manufacturer: Lumi United Technology Co., Ltd.
- Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China
8. User Tips
- Door Measurement: Before installation, carefully measure your door thickness and mortise dimensions to ensure compatibility (40-120mm thickness, 6068 mortise).
- Professional Installation: While the manual provides instructions, professional installation is highly recommended for optimal performance and security.
- Language: The lock supports English voice prompts, and the manual is available in multiple languages, including English.
- Package Contents: Verify all components are included in the package upon arrival. Stencils for installation are typically provided.
9. Frequently Asked Questions (FAQ)
- Q: Will this work with US doors?
- A: The lock is designed for door thicknesses between 40-120mm and uses a 6068 mortise. Please verify these specifications against your specific door type.
- Q: Is there a difference between the Global and China Model?
- A: This manual is for the international version, which supports English and integrates with global smart home platforms like Apple HomeKit. The product title specifies 'Pro Zigbee', indicating its capabilities.
- Q: Is this the Zigbee version or the Pro version?
- A: This is the Aqara Smart Door Lock A100 Pro, which includes Zigbee connectivity.
- Q: Is it possible to manage the lock through the Zigbee protocol? Is a Zigbee hub required?
- A: Yes, it supports Zigbee. A compatible Zigbee hub (e.g., Aqara Hub) is required for full Zigbee functionality, remote access, and integration with systems like Home Assistant.
- Q: Does it work with Apple Wallet?
- A: Yes, it supports Apple Home Key, allowing you to unlock the door using your iPhone or Apple Watch via Apple Wallet.
- Q: Does this product work with Alexa?
- A: The lock primarily integrates with Apple HomeKit. Direct Alexa integration is not specified. It may be possible through a compatible hub that bridges to Alexa, but not directly.
- Q: Can I add a fingerprint without using the Aqara app?
- A: While the primary setup and management are done through the Aqara Home app, the local settings mode allows for adding/removing normal users (including fingerprints) after initial setup.
- Q: Can the equipment be put outdoors?
- A: No, the lock has 'No Waterproof' protection level and is designed for indoor use only. Do not install it in humid environments or outdoors.
- Q: What is the difference between 40-80mm and 80-120mm options?
- A: These refer to the compatible door thickness ranges. You should select the option that matches your door's thickness.