1. Introduction and Overview
The LAUNCH X431 PRO3S+ V5.0 is a high-performance bi-directional scan tool designed for comprehensive automotive diagnostics. This device offers advanced features such as OE Topology Mapping, Online ECU Coding, and over 37 service functions, making it an essential tool for professional mechanics and DIY enthusiasts alike. It provides a full level-up from previous models like the X431 Pro3S+/X431 Pro V5.0, with top-notch hardware and expanded vehicle coverage.
This manual provides detailed instructions for using your diagnostic tool effectively and safely.
2. Safety Precautions
DANGER
- When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that slow reaction time and result in death or serious personal injury.
- Please use the included battery and power adaptor. There is a risk of explosion for using batteries that are not authorized or approved by the manufacturer.
- DO NOT attempt to operate the tool while driving the vehicle. Have a second person operate the tool. Any distraction may cause an accident.
WARNING
- Always perform automotive testing in a safe environment.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Before starting the engine, ensure that the gear lever is positioned in Neutral (for manual transmission) or in Park (for automatic transmission) to avoid injury.
- NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Wear an ANSI-approved eye shield when testing or repairing vehicles.
- Chock drive wheels and never leave the vehicle unattended while testing.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltage when the engine is running.
- To avoid damaging the tool or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle Data Link Connector (DLC) is clear and secure.
- Retrieving and using Diagnostic Trouble Codes (DTCs) for troubleshooting vehicle operation is only one part of an overall diagnostic strategy. Never replace a part based only on the DTC definition. Each DTC has a set of testing procedures, instructions and flow charts that must be followed to confirm the location of the problem. This information can be found in the vehicle's service manual.
- Automotive batteries contain sulfuric acid that is harmful to skin. In operation, direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
- Keep the tool dry, clean, and free of oil, water, or grease. Use a mild detergent on a clean cloth to clear the enclosure of the equipment when necessary.
- Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
- Store the tool and accessories in a locked area and out of reach of children.
- Do not use the tool while standing in water.
- Do not expose the tool or power adapter to rain or wet conditions. Water entering the tool or power adaptor increases the risk of electric shock.
- Do not keep using the scan tool when it is being charged.
- This tool is a sealed unit. There are no end-user serviceable parts inside. All internal repairs must be done by an authorized repair facility or qualified technician. If there is any inquiry, please contact the dealer.
- Keep the tool far away from magnetic devices because its radiations can damage the screen and erase the data stored on the tool.
- Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
- Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is on, as this could result in damage to the sensors or the Electronic Control Unit (ECU).
- Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
- Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble Programmable Read Only Memory (PROM). Otherwise, ECU and sensors can be damaged by static electricity.
- When reconnecting the ECU harness connector, be sure it is attached firmly. Otherwise, electronic elements, such as Integrated Circuits (ICs) inside the ECU, can be damaged.
3. Packing List
The following items are included in your LAUNCH X431 PRO3S+ V5.0 package. Please verify all contents upon receipt.
Standard Items:
- Scan tool (main unit) x 1: Indicates test results.
- SmartLink C device x 1: A device for accessing vehicle live data.
- Diagnostic cable x 1: Connects the SmartLink C device to the OBD II vehicle's DLC.
- Password envelope x 1: Contains Product S/N and Activation Code for registration.
- Power adaptor x 1 + switching adaptor x 2: Charges the scan tool.
- Type A to Type C data cable x 1: Connects the scan tool to a PC for data exchange/charging.
- Type A to Type B data cable x 1: Connects the SmartLink C device to a PC for J2534 reprogramming / Connects the SmartLink C device to scan tool for vehicle diagnosis.
- Ethernet cable x 1: Connects the SmartLink C device to the modem.
- Quick start guide x 1: A brief tutorial of product introduction.
Optional Adapter Kit (Non-16 Pin Adaptor Box):
For connecting the diagnostic cable and the diagnostic socket of non-OBD II vehicles. This kit mainly includes non-16 pin adaptors, battery clamps cable, and cigarette lighter cable.
- For Mitsubishi/Hyundai-12+16pin Cable
- For Benz-14pin Cable
- For Benz-38pin Connector
- For BMW-20pin Connector
- For Chrysler-6pin Connector
- For Ford-6+1pin Connector
- For GM/VAZ-12pin Connector
- For Honda-3pin Connector
- For Kia-20pin Connector
- For Nissan-14+16pin Connector
- For Toyota-17pin Connector
- For Toyota-22pin Connector
- Cigarette lighter Cable
- Double Clamp power Cable
- US Power Adapter 5V,2A
- EU * UK Power Adapter 5V,2A
- USB to micro data Cable
4. Components & Controls
The diagnostic system consists of two main components: the Scan Tool (tablet) and the SmartLink C device (VCI).
4.1 Scan Tool
The scan tool acts as the central processing system, receiving and analyzing live vehicle data from the SmartLink C device and outputting test results.
- Microphone
- Type A USB Port
- Connect to the VCI device for vehicle diagnosis via data cable.
- Connect to compatible add-on modules (e.g., Videoscope) or USB storage devices.
- Type C USB Port
- Connect to AC outlet for charging.
- Connect to a PC for data exchange.
- POWER Button: Turns the scan tool on/off. Press and hold for 8 seconds for forced shutdown.
- LCD Screen: Displays test results.
- Speakers
- Rear Camera
- Adjustable Stand: Flips out to any angle for comfortable use or hanging on the steering wheel.
4.2 SmartLink C Device (VCI)
The SmartLink C device offers powerful functions and can be used in several ways:
- As a VCI device: Works with the Diagnose module of the scan tool to obtain vehicle data and send it for analysis wirelessly or via data cable.
- As a SmartLink C (Customer) dongle: Used to issue remote diagnostic requests to a remote SmartLink B (Business) device.
- As a local J2534 PassThru device: Can be used with PC-installed OEM diagnostic software for J2534 reprogramming.
SmartLink C Device Ports:
- DB-15 diagnostic connector
- Touch screen
- LAN/WAN port: Connects to the modem via a crossover cable for SmartLink Super Remote Diagnostics.
- DC-IN port: Obtains power from the vehicle's DLC or an external power supply.
- Data I/O port: Connects to the scan tool for vehicle diagnosis or to a PC for J2534 reprogramming.
5. Specifications
5.1 Scan Tool Technical Parameters
- Operating System: Android 10.0
- CPU: 2.0 GHz 4-core
- Memory: 4GB RAM
- Storage: 64GB ROM
- Screen: 10.1 inch capacitive touch screen, 1280 x 800 FHD IPS
- Camera: Rear-facing 8.0MP
- Connectivity: Wi-Fi (802.11a/b/g/n/ac), Bluetooth, USB
- Working Temperature: 0°C ~ 50°C
- Storage Temperature: -20°C ~ 70°C
- Item Weight: 8.6kg
- Item Height: 37.2cm
- Item Width: 30.5cm
- Item Length: 43.5cm
- Electronic: Yes
- Batteries Included: Yes
- Power (W): 5V 5A (25W)
- External Testing Certification: CC
- Certification: RoHS, CE
5.2 SmartLink C Device Technical Parameters
- Working Voltage: DC 9~36V
- Power Consumption: ≤ 6W
- Communication: Wireless/Wired connection
- Size: 204mm x 110mm x 45mm
- Working Temperature: 0°C ~ 50°C
5.3 Compliance Information
Model: X-431 PRO3S+ SmartLink HD/X-431 V+ SmartLink HD
FCC ID: XUJX431PROV5
IC: 29886-PO1005A
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference received, including interference that may cause undesired operation.
The device for operation in the band 5150-5250MHz is only for indoor use.
The device complies with FCC Radiation exposure limits set forth for uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator and your body.
This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restriction.
6. Setup and Initial Use
6.1 Charging & Powering On
- Use the included power adaptor to charge the scan tool.
- After charging is complete, press the POWER button to turn the scan tool on. The system starts initializing and then enters the home screen.
Note: If the battery remains unused for a long period or is completely discharged, it is normal that the tool will not power on while being charged. Charge the tool for 5 minutes and then turn it on.
To turn off the tool, press and hold the POWER button until an option menu appears. Tap Power Off.
6.2 Screen Layout
There are five on-screen buttons available at the bottom of the screen:
- Home: Navigates to the home screen.
- Recent App: Views currently running or recently used applications.
- VCI Connection: Shows whether the VCI device is properly connected.
- Screenshot: Captures the current screen.
- Back: Returns to the previous screen.
6.3 Language Setting
The tool supports multiple system languages. To change the language:
- On the home screen, tap Settings -> System -> Languages & input -> Languages.
- Tap Add a language, and then choose the desired language from the list.
- Tap and hold the desired language and drag it to the top of the screen; the system will change to the target language.
6.4 Network Setup
The built-in Wi-Fi module facilitates network connection for registration, app downloads, remote diagnosis, and software updates.
- On the home screen, tap Settings -> Network & Internet -> Wi-Fi.
- Slide the Wi-Fi switch to ON; the scan tool will search for available wireless networks.
- Select a wireless network:
- If the selected network is open, the scan tool will connect automatically.
- If the selected network is encrypted, a network password is required.
- When Connected appears, the Wi-Fi connection is complete.
Note: Power consumption increases when Wi-Fi is always on. Turn off Wi-Fi if not required to save power.
6.5 Registration & Update
For new users, registration is required before use.
- Tap the application icon on the home screen, then tap Login on the upper right corner.
- If you have not registered, use Email login and tap New Registration.
- Input your Email address, tap CAPTCHA, enter the verification code, and tap Login-Register.
- If no scan tools are bound to this Email, tap ACTIVATE VCI.
- Input the 12-digit Product Serial Number and 8-digit Activation Code (from the password envelope), then tap ACTIVATE.
- After successful VCI activation, the system will enter the update center. Tap Update to update all available software.
Note: All software is updated periodically. Regularly check for updates for best service and experience.
If scan tools are already bound to your Email, it will enter the job menu directly. You can manage VCI and activate new ones via User Info -> VCI.
7. Operating Instructions
7.1 Job Menu Overview
The Job Menu includes the following function modules:
| Name | Description |
|---|---|
| Intelligent Diagnose | Automatically decode the vehicle VIN and quickly access the vehicle system. |
| Local Diagnose | Diagnose a vehicle manually. |
| Remote Diagnose | Two remote diagnosis platforms available: SmartLink Super remote diagnosis solution and X431 Remote Diagnosis. |
| Special Function | Offers coding, reset, relearn and more service functions. |
| Toolbox | Provides additional add-on tools to extend functions. |
| Software Update | Updates vehicle diagnostic software and APK. |
| X-431 Diagnostic Kit | Includes vehicle coverage, CANBUS pin detection, CANScope, and Fix connector firmware. |
| Feedback | To feed back recent diagnostic logs for issue analysis. |
| Mall | Subscribe to extra software or service functions. |
| LAUNCH Academy | Includes repair cases, operation skills, and training videos. |
| Repair Info | Check repair information and ask for support. |
| User Info | Manage VCI, diagnostic reports, change password, etc. |
| Settings | System settings of diagnostic application. |
| About | Software version, product manual, service agreement, privacy policy. |
7.2 Connections & Communication Setup
Ensure the ignition is off and vehicle battery voltage is within 9-14V or 18-30V. Locate the vehicle's DLC port.
Connecting the VCI to the Vehicle:
- For OBD II vehicles, use the included diagnostic cable (DB15F to HD15F data cable and HD15M to OBD16 adaptor) to connect the VCI to the vehicle's DLC port.
- For non-OBDII vehicles, select the appropriate adaptor from the adaptor kit (sold separately) and connect it to the data cable.
- Turn the vehicle's ignition ON with the engine OFF. The tool is now ready for diagnosis.
Communication Setup:
The scan tool communicates with the VCI device wirelessly (Bluetooth) or wired (USB).
- Wireless Communication: Automatically established after user registration.
- USB Connection: Connect the data cable from the scan tool to the VCI. The VCI navigation button will indicate a successful USB connection. This provides the most stable and fastest communication.
7.3 Vehicle Diagnosis
The tool offers Intelligent Diagnose and Local Diagnose modes.
7.3.1 Intelligent Diagnose
This function obtains vehicle data from the cloud server to perform quick tests via VIN decoding, avoiding manual menu selection.
- Tap Intelligent Diagnose and choose the vehicle type to start pairing.
- If VIN is successfully decoded, the screen will display vehicle information.
- Tap Diagnostic to start a new diagnostic session.
- Tap Scan History to view historical repair records.
- Tap Quick access for direct function selection.
Note: Not all cars support this function due to manufacturer settings.
7.3.2 Local Diagnose
If VIN decoding fails, the tool enters local diagnose mode. You can also perform manual diagnosis.
- Tap Local Diagnose to enter the vehicle selection page.
- Manually select the vehicle's make, model, and year, then follow on-screen instructions.
Diagnostic Toolbar Buttons:
- Home: Return to the home screen.
- Print: Print selected screenshots via an external printer.
- Exit: Exit the diagnostic application.
Key Diagnostic Functions:
- Version Information: Reads VIN, software, and ECU version.
- Read Fault Code: Reads DTCs to identify vehicle breakdown causes.
- Clear Fault Code: Erases DTCs after repairs.
- Read Data Stream: Displays live data from the vehicle's ECU.
- Actuation Test (Bi-directional Control): Outputs commands to the ECU to drive actuators for testing.
- Special Function: Offers coding, reset, relearn, and other service functions.
7.4 Remote Diagnose
The SmartLink system allows remote diagnosis between a SmartLink C (Customer) device and a SmartLink B (Business) device or a PC client technician.
Initiating Remote Diagnosis:
- Tap Remote Diagnose on the scan tool.
- To connect with a partner not in your friend list: Tap Contacts, input the partner's username or serial number, and tap Search. Then tap Remote Diagnose next to their name.
- To connect with a partner in your friend list: Tap Contacts, select the desired partner.
- Tap REQUEST CONTROL REMOTE DEVICE or INVITE REMOTE DIAGNOSE ASSISTANT.
- Choose the diagnostic software (for INVITE REMOTE DIAGNOSE ASSISTANT).
- Wait for the partner's confirmation, then start the connection and diagnosis.
Remote Diagnosis with PC Client Technician:
- Tap Remote.
- Slide the switch to ON to allow the PC technician to control your device.
- Notify the remote technician to log in to http://remote.x431.com/.
- The technician can then input your device's serial number to start remote diagnosis.
Note: Ensure a stable network connection and that the device is properly connected to the vehicle before processing remote diagnosis.
8. Maintenance
8.1 Special (Reset) Functions
This module provides quick access to commonly performed service functions, including coding, reset, and relearn functions to restore vehicle functionality after repair or replacement. Available tests vary by vehicle manufacturer, year, and model.
Examples of 55+ Hot Service Functions:
- Oil Reset
- Brake Reset
- ABS Bleeding
- SAS Calibration
- Battery Matching
- Cylinder Power Balance Test
- Suspension Calibration/Height Calibration
- TPMS Reset (Indirect)
- Injector Coding
- Throttle Adaptation
- EPB Reset
- Crank Position Sensor Adaptive Learn (Gear Learn)
- AFS Headlamp Reset
- AC System Relearn
- Gearbox Relearn
- Air Level Calibration
- Camshaft Position Sensor Adaptive Learning
- Clutch Pedal Position Learn
- Activate compressor
- High Voltage Battery Health Test
- Windows Calibration
- Intelligent Cruise Control System
- Language Change
- Motor Angle Calibration
- Seat Occupancy Calibration
- Stop/Start Reset
- Sunroof Initialization
- Tire Reset
- Transport Mode
- A/F Settings
- Clutch Matching
- EBCM Relearn
- Gateway Module Data Calibration
- Engine Air Filter Life Reset
- Rainfall Light Sensor
- Acceleration Sensor Reset
- CAS Reset
- ALBBF initialization
- Actuator Recalibration
- HVAC Control Module Calibrate
- Adaptive Pressure Control Learn
- Alcohol Content Reset
- Brake Pedal Position Learn
- Hybrid Control Compression Test
- Fuel Injector Balance
- Crankshaft Sensors Relearn
- Idle learn Reset
- Zero Point Calibration
- VIN Relearn
- ABS Initialization
- Coolant Bleeding
- FRM Matching
- Cylinder Injector Flow Identifier
Note: Special Functions vary by vehicle model. Check compatibility before use.
8.2 Toolbox (Extension Modules)
Each module consists of hardware and an app. These modules require specific compatible hardware (sold separately) to function with the scan tool.
- TPMS: Configures the scan tool as a TPMS activation & diagnostic tool. Requires compatible TSGUN device.
- ADAS (Calibration): Calibrates camera-based & radar-based driver assistance systems. Requires specific ADAS calibration tool.
- Oscilloscope: Helps diagnose faults on automotive electronic equipment and wiring. Requires specific Scopebox.
- Sensor Simulator: Diagnoses and simulates vehicle sensor faults. Requires compatible S2-2 Sensorbox.
- Videoscope: Checks unreachable parts of the engine, fuel tank, and braking system. Requires compatible Videoscope (VSP600).
- BST360 (Battery Tester): Fixes battery detection issues. Requires specific Bluetooth battery tester.
- Multimeter: Measures physical parameters like voltage, resistance, frequency. Utilizes EM101N hardware.
- Current Clamp: Performs AC/DC current and DC voltage tests. Requires compatible current clamp.
- Insulation Tester: Measures insulation resistance, voltage, and other parameters.
- Immobilizer Programmer: Performs read-write functions for vehicle keys, EEPROM, MCU, and ECU. Requires specific immobilizer programmer (X-PROG3).
- Key Programmer: Identifies car key chips, generates chip models, reads remote control frequency. Requires compatible key programmer.
- X431 Smartlink C Heavy Duty Module: Turns X431 scan tools into full comprehensive heavy duty truck diagnostic tools, covering 12V & 24V Trucks (1996-2026).
- NEV Detection Expansion Package: For fully functional diagnostics and battery pack detection on NEVs.
- WiFi Printer: Connects to WiFi printers to print diagnostic reports.
- Motorcycle Diagnostic Connector Kit: For diagnosing various motorcycle brands.
8.3 Software Update
This module allows you to update diagnostic software, apps, and frequently used software.
- Go to Upgrade Center on the Job Menu and tap the Downloaded tab.
- The Available tab lists software categories: Common software, Frequently used vehicle software, and Other vehicle software.
- Tap Update to start downloading and installing software packages.
- If your software subscription is due or expires, tap Renewals to enter Mall to renew.
8.4 Settings
You can configure various application settings:
- Units: Configure measurement units (Metric or English).
- Shop Information: Define print information for diagnostic reports.
- Printer Set: Establish wireless connection with a Wi-Fi printer for printing operations.
- Clear Cache: Clears the App cache.
- Diagnostic Software Auto Update: Sets whether automatic update is ON.
- Device Account Management: Manages sub-accounts for multiple users.
- VCI Management: Deactivates pairing with the VCI device via Bluetooth.
- Login/Log out: Logs out the current user or logs back in.
8.5 J2534 Reprogramming
The SmartLink C device can function as a J2534 PassThru device, allowing it to work with a PC installed with OEM diagnostic software for J2534 reprogramming. The necessary LAUNCH J2534 tool can be downloaded from www.cnlaunch.com.
9. Troubleshooting (FAQs)
9.1 How to save power?
- Turn off the screen while the tool is idle.
- Set a shorter standby time.
- Decrease the brightness of the screen.
- If WLAN connection is not required, turn it off.
- Disable GPS function if GPS service is not in use.
9.2 Communication error with vehicle ECU?
Please confirm:
- Whether the VCI device is correctly connected.
- Whether the ignition switch is ON.
- If all checks are normal, send vehicle year, make, model and VIN number to us using the Feedback feature.
9.3 Failed to enter into vehicle ECU system?
Please confirm:
- Whether the vehicle is equipped with this system.
- Whether the VCI device is correctly connected.
- Whether the ignition switch is ON.
- If all checks are normal, send vehicle year, make, model and VIN number to us using the Feedback feature.
9.4 How to download the diagnostic App after resetting the scan tool?
Note: Before registration, ensure the network is properly connected.
If the scan tool has been reset to factory settings or the diagnostic app uninstalled, follow these methods:
Method 1 - Via APP Init
- On the Android home screen, tap the mini program APP Init to run it.
- The program automatically obtains the Serial Number. Confirm it against the Password Envelope, then tap OK to start downloading and installing.
Method 2 - Via official website
- Launch the browser and go to www.x431.com.
- Tap "Login", input username and password, then tap "Log In."
- Confirm the serial number, tap "APP application program" and the Download icon.
- Install the downloaded app.
- Log in with existing credentials and go to the update center to download diagnostic software.
9.5 What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If it still displays in English, it means the software for that language is under development.
9.6 What network condition is required for SmartLink Diagnosis?
The remote SmartLink Diagnosis operation requires a network broadband of 100MB or above.
9.7 What does "Delay" displayed on the SmartLink C screen mean?
"Delay" (network delay) indicates the state of network communication. Different colors represent different delay statuses:
- Green: Shorter network delay, higher success rate of remote communication.
- Yellow: Medium network delay, medium success rate of remote communication.
- Red: Longer network delay, lower success rate of remote communication and remote ECU reprogramming operations are not suggested.
9.8 My network delay is too long.
Possible reasons:
- Greater distance between SmartLink B and SmartLink C dongle.
- Too many network communication nodes.
- Poor network and slow data communication speed.
9.9 Some systems of some old vehicles cannot be tested.
The SmartLink C dongle supports CAN2.0/CANFD/DoIP communication protocols, but some old vehicles use K-Line communication protocol.
9.10 Is it necessary to re-ignite the car after the diagnostic system starts working?
For some vehicle conditions, re-ignition provides a more detailed analysis after OBD diagnosis.
10. User Tips
- Check Compatibility First: Before purchasing or performing advanced functions like ECU Coding, always verify compatibility with your specific vehicle model and year. You can contact the seller with your VIN for confirmation.
- Keep Software Updated: Regularly update your diagnostic software and apps to ensure you have the latest vehicle coverage, enhanced functions, and bug fixes. This is crucial for optimal performance and to avoid compatibility issues with newer car models.
- Utilize Remote Functions: For complex diagnostic challenges, leverage the remote diagnosis features to connect with expert technicians or other LAUNCH users for assistance. This can save significant time and effort.
- Understand Network Delay: Pay attention to the 'Delay' indicator during remote diagnosis. A 'Red' status suggests a poor connection, which might affect the reliability of remote operations, especially ECU reprogramming.
- Explore Special Functions: Don't limit yourself to basic diagnostics. The tool offers a wide array of special functions (resets, adaptations, calibrations) that can address specific vehicle issues and enhance your repair capabilities.
- Backup Data: When performing ECU coding or other critical operations, ensure you have a backup of the original data if possible.
11. Warranty and Support
11.1 Warranty
LAUNCH electronic products are warranted against defects in materials and workmanship for one year from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.
This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.
Final determination of defects is made by LAUNCH. No agent, employee, or representative of LAUNCH has authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
This warranty is in lieu of any other warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.
11.2 Customer Service
If you have any questions during the operation of the unit, please contact the Seller or LAUNCH TECH Service Center.
- Website: https://en.cnlaunch.com
- Phone: +86 755 8455 7891
- Email: overseas.service@cnlaunch.com