THINKCAR Thinkscan Max 2

Contents

Thinkcar Thinkscan Max 2 Automotive Diagnostic Tool

Comprehensive User Manual

1. Introduction to the Product

The Thinkcar Thinkscan Max 2 is a high-level OBD product designed for DIY users and professionals. It features an Android operating system, powerful functions, and online update capabilities. It supports full communication protocols, covering a wide range of vehicle models for comprehensive diagnostics.

The device facilitates full car model and full system vehicle trouble diagnosis through simple Bluetooth communication between the diagnostic dongle and the host computer. This includes reading and clearing Diagnostic Trouble Codes (DTCs), reading data streams, performing actuation tests, and utilizing special functions.

1.1 Diagnostic Host Components

The diagnostic host includes:

  1. Power Inlet: For charging or data transmission.
  2. USB Expansion Slot: For connecting external devices.
  3. Power Source/Lock Screen Button: Press for 3 seconds to turn on/off, or to wake/sleep the screen. Long press for over 8 seconds for a forced shutdown.
  4. Loudspeaker: For audio alerts and notifications.
  5. Screen: The primary display for all operations.
  6. Diagnostic Dongle: Pre-installed in the docking slot at the bottom of the host. Press once to eject. Reinsert when not in use to prevent loss.
Thinkscan Max2 OE-Level All System Diagnostic Tool showing various diagnostic functions like SAS, BMS, EPB, Chassic, Transmission, TPMS, DPF, ABS, Headlamp.
Figure 1: Thinkscan Max 2 OE-Level All System Diagnostic Tool Interface

1.2 Technical Specifications

FeatureSpecification
Model NameThinkcar Max2
Operating SystemAndroid 10.0
Screen Size5.99 inches
Running Memory (RAM)2G
Storage Memory (ROM)32G
Battery Capacity3150mAh/7.6V
Resolution720*1440 pixel
Working Voltage5V
Working Current≤2.5A
Working Environment14 °F ~122 °F (-10°C~50°C)
Storage Environment-4 °F ~140 °F (-20°C~60°C)
Special FeaturesBluetooth, CANFD protocol, AutoAuth for FCA SGW
External Testing CertificationCE

2. Setup and Initial Use

Follow these steps for initial setup and use of your Thinkscan Max 2 device.

2.1 Charging the Host

To charge the device:

  1. Connect one end of the power cord to the USB socket of the power adapter.
  2. Connect the other end to the charging jack at the bottom of the host.
  3. Plug the charger power plug into a power outlet to start charging.

The battery status icon will indicate charging. Once fully charged, disconnect the host.

2.2 Power On and Off

Power On: Long press the power button until the start interface appears. If the device does not turn on due to low battery, charge it for a while and try again.

Power Off: Long press the power button until a dialog box appears, then follow the prompts to turn off. For a forced shutdown, long press the power button for more than 8 seconds until the screen goes dark.

2.3 Initial Device Configuration

The following settings should be made when you initially use the tool:

  1. Turn on the Machine: After pressing the power button, the Thinkcar logo will appear on the screen.
  2. Language Setting: Select your preferred language from the list displayed on the interface. The device supports 17 languages including English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak, Korean, Swedish, Dutch, Traditional.
  3. Connect WIFI: The system will automatically search for available Wi-Fi networks. Select your network and enter the password if it's encrypted. If no Wi-Fi is available, you can enable "Portable Mobile Hotspot" on another device.
  4. Choose Time Zone: Select the time zone for your current location. The system will automatically configure the time.
  5. User Agreement: Read the terms and conditions carefully. Select "Agree to the above terms" and click "Next" to complete registration.
  6. Create an Account: Register an account using your email address. If you own other THINK series products, you can log in directly with your existing account.
  7. Typing in Business Information: Enter your repair shop information, which will be displayed in diagnostic reports. This step can be skipped.
Thinkscan Max 2 registration steps showing timezone selection, agreement, and account creation.
Figure 2: Easy 3-step Quick Registration Process
Thinkscan Max 2 supporting 17 languages with flags of various countries.
Figure 3: Thinkscan Max 2 supports 17 languages for localized translation.

2.4 Connecting to the Vehicle

The diagnostic dongle is pre-installed in the docking slot. Gently press the dongle once to eject it. Locate the vehicle's Data Link Connector (DLC) port, typically a 16-pin connector located within 12 inches of the center of the instrument panel, under or around the driver's side. For some Asian and European vehicles, it might be behind the ashtray. Insert the diagnostic dongle into the DLC port.

Thinkcar Thinkscan Max 2 showing wireless and wired connection methods to a car's OBDII port.
Figure 4: Wireless and Wired Connection Methods

3. Operating the Diagnostic Tool

The Thinkscan Max 2 offers various functions for vehicle diagnosis and maintenance.

3.1 Diagnosis Functions

The device supports full system diagnosis for over 100 automobile brands. This includes reading and clearing DTCs, reading real-time data streams, special functions, and actuation tests.

  1. Smart Diagnosis: From the main interface, click "Scan". Then, click "AUTOSEARCH" to establish Bluetooth communication with the dongle and automatically read the vehicle's VIN. If VIN reading fails, you may need to enter it manually.
  2. Choose Test Mode: After reading the VIN, the screen will display test mode options:
    • Health Report: Quickly checks the vehicle and displays a health report (available if diagnostic software supports it). Click "Quick Test" to scan DTCs and view results.
    • System Scan: Automatically scans all systems of the vehicle.
    • System Selection: Manually choose a specific automotive electronic control system.
  3. Read Fault Code: This function reads DTCs stored in the ECU memory to help identify vehicle breakdowns. Click "Read Fault Code" to display diagnostic results.
  4. Clear Fault Code: Clears DTCs from the ECU memory. Click "Clear Fault Code" to delete existing DTCs and turn off the Malfunction Indicator Light (MIL).
  5. Read Data Stream: Displays real-time data and parameters from the car's ECU. This helps technicians understand vehicle performance. You can select specific data streams, combine up to 4 data streams for graphical comparison, and record data.
  6. Actuation Test (Optional Subscription): Tests if electronic control system components are working normally. This function requires a subscription ($49.95/year per car brand).
  7. ECU Coding (Optional Subscription): Reflashes vehicle control modules to update software or reprogram adaptive data for components after repairs. This function requires a subscription ($49.95/year per car brand).
Thinkscan Max 2 displaying diagnostic trouble codes and options for DTC help, free lifetime update, 4 in 1 datastream graph, emissions readiness status, online feedback & upgrade.
Figure 5: Diagnostic Trouble Code Display and Options
Thinkscan Max 2 showing full OBD2 functions including real-time data, freeze frame, clear codes, read codes, O2 sensor test, I/M readiness, OBDII vehicle information, and test monitor on board.
Figure 6: Full OBD2 Functions Interface
Thinkscan Max 2 displaying ECU Coding and Bi-directional Test functions with examples like power window, illuminated entry, warning, light control, slide roof, air conditioner.
Figure 7: Actuation Test and ECU Coding Functions

3.2 Maintenance & Reset Functions

The Thinkscan Max 2 supports over 28 commonly used maintenance and reset functions. These functions help reset various systems in your vehicle after repairs or replacements.

Thinkscan Max 2 displaying icons for 28+ maintenance reset services including Seats, Oil, ETS, Brake, IMMO, SAS, Bleed, BMS, Injec, Windows, DPF, TPMS, SUS, Gearbox, Gear, EGR, Airbag, AFS, SCR, Adblue, Sun, Transport, Language, Tyre, Stop/Start, ODO, NOx, Coolant, A/F.
Figure 8: 28+ Maintenance Reset Service Icons

Key functions include:

  • Oil Reset: Resets the oil maintenance light after an oil change.
  • Elec. Throttle Adaption: Initializes the throttle actuator to return the ECU's learning value to its initial state.
  • SAS - Steering Angle Reset: Resets the steering angle to zero after replacing the steering angle position sensor or mechanical parts.
  • Battery Matching: Performs a resetting operation on the vehicle battery's monitoring unit after battery replacement.
  • ABS Bleeding: Bleeds the brake system to restore ABS brake sensitivity when air is present in the ABS.
  • Brake Reset: Resets the brake pad system after replacing brake pads.
  • DPF Regeneration: Clears Particulate Matter (PM) from the DPF filter.
  • Gear Learning: Learns crankshaft gear machining tolerance for accurate misfire diagnosis.
  • IMMO Service (Anti-theft Matching): Matches anti-theft keys to the immobilizer control system.
  • Injector Coding: Writes or rewrites injector codes in the ECU for accurate fuel injection control.
  • TPMS Reset: Resets tire pressure and turns off the TPMS MIL after tire pressure issues or sensor replacement.
  • Suspension Matching: Adjusts vehicle body height after replacing height sensors or control modules.
  • AFS Reset (Adaptive Headlamp System): Initializes the adaptive headlamp system.
  • A/T Learning (Gearbox Matching): Completes gearbox self-learning to improve gear shifting quality.
  • Sunroof Initialization: Sets sunroof lock-off, rain-closing, memory functions, and temperature thresholds.
  • EGR Adaption: Learns the EGR valve after cleaning or replacement.
  • ODO Reset: Copies, writes, or rewrites odometer mileage values.
  • Airbag Reset: Resets airbag data to clear collision fault indicators after airbag deployment.
  • Transport Mode: Deactivates transport mode to restore full vehicle functionality.
  • A/F Reset: Sets or learns Air/Fuel ratio parameters.
  • Stop/Start Reset: Opens or closes the automatic start-stop function.
  • NOx Sensor Reset: Resets the catalytic converter learned value after NOx sensor issues or replacement.
  • AdBlue Reset (Diesel Engine Exhaust Gas Filter): Required after replacing or refilling diesel exhaust treatment fluid.
  • Seat Calibration: Matches seats with memory function after replacement or repair.
  • Coolant Bleeding: Activates the electronic water pump before venting the cooling system.
  • Tyre Reset: Sets tire size parameters after modification or replacement.
  • Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending functions.
  • Language Change: Changes the system language of the vehicle central control panel.

3.3 Other Functions

  • ThinkFile: Records and creates files for diagnosed vehicles based on VIN and check time, including diagnostic reports, data stream records, and screenshots.
  • ThinkStore: Allows downloading diagnostic software and purchasing hardware products.
  • Repair Info: Provides a fault code database, vehicle compatibility table, videos, and learning courses for technicians.
  • Software Update: Updates diagnostic software and the application via Wi-Fi.
  • Settings: Allows modification of account information, customer management, business information, network settings, and firmware upgrades.
ThinkScan Max 2 other functions including Auto VIN Scan, WiFi Upgrade, Screenshot, and Screen Recorder.
Figure 9: Additional Functions: Auto VIN, WiFi Update, Screenshot, and Screen Recorder

3.4 Printing Diagnostic Reports

The Thinkscan Max 2 allows you to easily share diagnostic reports via email, which can then be printed. This is useful for record-keeping and sharing information with clients or other technicians.

Thinkcar Thinkscan Max 2 showing a diagnostic report being generated and options to send to email or print.
Figure 10: Print Diagnosis Report Wirelessly via Share Function

4. Maintenance

4.1 General Care

  • Keep the tool dry, clean, and free from oil, water, or grease.
  • Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.

4.2 Battery Care

  • The battery can be recharged repeatedly. However, as a wearable component, the standby time will shorten over time. Avoid frequent, repeated charging to extend battery life.
  • Charging time varies with temperature and battery status.
  • If the battery power is low, the system will prompt you to connect the charger. The device will turn off if the battery power is too low.

4.3 Software Updates

The device supports free lifetime software updates via Wi-Fi for all system diagnostic functions, OBD2 functions, and 28 reset functions. Ensure a stable internet connection and navigate to "Set up" -> "App Update" to check for and install updates.

Thinkscan Max 2 showing a software update screen with options to download and update various car software.
Figure 11: One-Key Update via Wi-Fi for Lifetime Free Updates

5. Troubleshooting (Q&A)

Here are some common questions and answers related to this tool:

Q: Why does it have no responses when connected to a car computer?
A: Check if the connection with the vehicle diagnostic socket is normal, if the ignition switch is on, and if the tool supports the car model.
Q: Why does the system stop while reading the data stream?
A: This may be caused by loose diagnostic dongles. Please unplug the dongle and reconnect it firmly.
Q: Communication error with vehicle ECU?
A: Please confirm: 1. If the diagnostic dongle is correctly connected. 2. If the ignition switch is ON. 3. If all checks are normal, send vehicle year, make, model, and VIN number to customer support using the Feedback feature.
Q: Why does the host screen flash when the engine ignition starts?
A: It is normal and caused by electromagnetic interference.
Q: How to upgrade the system software?
A: 1. Start the tool and ensure a stable Internet connection. 2. Go to "Set up" -> "App Update", click "OTA" and then click "check version" to enter the system upgrade interface. 3. Complete the process by following the instructions on the screen step by step. This may take a few minutes depending on internet speed. After successful upgrade, the tool will automatically restart and enter the main interface.
Q: How to capture a screenshot?
A: A "Screenshot" icon is always floating on the screen. Tap it to capture the current screen, and the screenshot is saved in the ThinkFile module.
Q: What is the difference between EU Version and Global Version?
A: Both versions support the same functions. The EU Version is designed for European customers (including Russia and UK) and only supports working in that region. The Global Version has no IP restrictions and can be used worldwide.
Q: Does this scanner support light and heavy diesel vehicles?
A: The product description and specifications do not explicitly mention support for heavy diesel vehicles. It is primarily an OBD2 scanner for passenger vehicles. Please contact support with your specific vehicle details for compatibility.

6. User Tips

  • Keep Charged: Some users report the battery runs out quickly. Ensure the device is fully charged before extended use or keep it connected to power during long diagnostic sessions.
  • Check Compatibility: While the device supports a wide range of vehicles, always verify compatibility with your specific car model and year, especially for advanced functions like Actuation Test and ECU Coding.
  • Utilize Remote Tech Support: If you are new to diagnostic tools or encounter complex issues, leverage the one-on-one remote assistance service provided by Thinkcar.

7. Warranty and Support

7.1 Warranty Terms

This warranty applies only to users and distributors who purchase THINKCAR TECH INC products through normal procedures. Within one year from the date of delivery, THINKCAR TECH warrants its electronic products for damages caused by defects in materials or workmanship. Damages to the equipment or components due to abuse, unauthorized modification, use for non-designed purposes, operation in a manner not specified in the instructions, etc. are not covered by this warranty. Compensation for dashboard damage caused by the defect of this equipment is limited to repair or replacement.

THINKCAR TECH does not bear any indirect and incidental losses. THINKCAR TECH will judge the nature of the equipment damage according to its prescribed inspection methods. No agents, employees, or business representatives of THINKCAR TECH are authorized to make any confirmation, notice, or promise related to THINKCAR TECH products.

7.2 Contact Information

  • Service Line: 1-833-692-2766
  • Customer Service Email: support@thinkcarus.com
  • Official Website: www.mythinkcar.com

Product tutorials, videos, FAQs, and coverage lists are available on the official Thinkcar website.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.