Yecnecty n0658(a)

Contents

Yecnecty Motorcycle Kickstand Extension Kit User Manual

Model: n0658(a)

1. Introduction

This manual provides essential information for the safe and effective use of your Yecnecty Motorcycle Kickstand Extension Kit, model n0658(a). This kit is designed to make hard-to-reach kickstands easier to operate on compatible Harley-Davidson Sportster models.

Please read all instructions thoroughly before installation and use. Failure to follow these instructions may result in damage to the product or personal injury.

2. Safety & Warnings

  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before use; do not use if damaged.
  • Do not expose to water or moisture.
  • Always ensure the motorcycle is stable and securely parked before attempting to operate the kickstand.
  • Professional installation is recommended for optimal safety and performance.

3. Package Contents

The Yecnecty Motorcycle Kickstand Extension Kit includes:

  • 1x Kickstand Extension Arm (Polish Chrome, Alloy)
  • Mounting Screws and Nut
Kickstand extension kit components: extension arm, screw, and nut
Figure 1: Kickstand extension kit components (extension arm, screw, and nut).
Side view of the kickstand extension arm and mounting screw
Figure 2: Side view of the kickstand extension arm and mounting screw.
Top-down view of the kickstand extension arm and mounting screw
Figure 3: Top-down view of the kickstand extension arm and mounting screw.

4. Compatibility (Fitment)

This product is designed for specific Harley-Davidson Sportster models. It is not a universal item. Please verify your motorcycle's model and year against the list below:

  • For Harley-Davidson Sportster Custom - XL 883C 1999 - 2003
  • For Harley-Davidson XL 1200C Custom 1996 - 2003
  • For Harley-Davidson XL 1200S Sport 1996 - 2003
  • For Harley-Davidson XL 883R 2002 - 2003
  • For Harley-Davidson XLH 1100 1986 - 1987
  • For Harley-Davidson XLH 1200 1988 - 2003
  • For Harley-Davidson XLH 883 1986 - 2003
  • For Harley-Davidson XLH 883 Deluxe 1986 - 1995
  • For Harley-Davidson XLH 883 Hugger 1987 - 2003
  • For Harley-Davidson 1200 Custom EFI XLC 2002 - 2003
  • For Harley-Davidson 1200 Custom XLC 1996 - 2003
  • For Harley-Davidson 1200 Sport XLS 1996 - 2003
  • For Harley-Davidson 1200 XLCP 2002 - 2003
  • For Harley-Davidson 883 Custom EFI XLC 1999 - 2003
  • For Harley-Davidson 883 Custom XLC 1998 - 2003
  • For Harley-Davidson 883 Deluxe XLH 1986 - 1995
  • For Harley-Davidson 883 Hugger XLH 1987 - 2003
  • For Harley-Davidson 883 Roadster EFI XLR 2002 - 2003
  • For Harley-Davidson 883 Roadster XLR 2002 - 2003
  • For Harley-Davidson Sportster 1100 XLH 1986 - 1988
  • For Harley-Davidson Sportster 1200 XLH 1988 - 2003
  • For Harley-Davidson Sportster 883 XLH 1986 - 2003

5. Installation Instructions

Important Note: Installation of this kickstand extension kit requires drilling. If you are not comfortable performing this modification, it is highly recommended to seek professional assistance from a qualified motorcycle mechanic.

Tools Required (Not Included):

  • Drill
  • Appropriate drill bit for metal (matching the diameter of the mounting screw)
  • Wrenches or sockets for tightening the mounting screw and nut
  • Safety glasses
  • Gloves

Installation Steps:

  1. Park your motorcycle on a flat, stable surface using a suitable stand or lift to ensure it is secure and cannot tip over during installation.
  2. Locate the existing kickstand on your motorcycle.
  3. Carefully position the kickstand extension arm against the kickstand to determine the optimal mounting location. The extension should provide easier access and leverage for deploying and retracting the kickstand.
  4. Mark the drilling point(s) on the kickstand where the extension arm will be attached. Ensure the marks are accurate and aligned.
  5. Using the appropriate drill bit, carefully drill the necessary hole(s) through the kickstand at the marked location(s). Take precautions to avoid damaging other motorcycle components.
  6. Align the kickstand extension arm with the drilled hole(s) and secure it using the provided mounting screws and nut.
  7. Tighten the screws firmly, but do not overtighten, to ensure the extension is securely attached without stripping threads or damaging components.
  8. Test the operation of the kickstand with the new extension. Ensure it deploys and retracts smoothly and securely.
  9. Double-check all fasteners after a short ride to ensure they remain tight.
Kickstand extension installed on a motorcycle, showing how it extends the reach of the kickstand
Figure 4: Kickstand extension installed on a motorcycle.

6. Operation

The kickstand extension is designed to simplify the deployment and retraction of your motorcycle's kickstand. Once installed, use the extension arm to easily push the kickstand down to park your motorcycle or pull it back up before riding. Always ensure the kickstand is fully deployed and stable before dismounting, and fully retracted before riding.

7. Maintenance

  • Regularly inspect the kickstand extension for any signs of wear, damage, or loose fasteners.
  • Clean the chrome finish periodically with a soft cloth and appropriate chrome cleaner to maintain its appearance.
  • Ensure the mounting screws remain tight. Re-tighten if necessary, but do not overtighten.
  • Avoid exposing the extension to harsh chemicals or abrasive materials that could damage the finish.

8. Troubleshooting

If you encounter issues with your kickstand extension, consider the following:

  • Extension feels loose: Check and tighten all mounting screws. Ensure the drilling was done accurately and the extension is properly seated.
  • Difficulty operating kickstand: Verify that the extension is not obstructed by other motorcycle parts. Ensure the kickstand mechanism itself is functioning correctly and is not stiff or damaged.
  • Damage to extension: If the extension is bent, cracked, or severely damaged, replace it immediately to ensure safe operation of your kickstand.

9. Specifications

Attribute Detail
Product Name Motorcycle Kickstand Extension Kit
Model Name n0658(a)
Brand Name Yecnecty
Item Type Foot Rests (Product Category)
Material Alloy
Color Polish Chrome
Origin Mainland China
Approx. Package Weight 0.15 kg
Approx. Package Dimensions 1 cm (Length) x 1 cm (Width) x 1 cm (Height)

10. User Tips

No specific user tips are available from customer reviews or Q&A for this product at this time. Always refer to the installation and safety guidelines provided in this manual.

11. Support & Contact Information

For further assistance or inquiries regarding your Yecnecty Motorcycle Kickstand Extension Kit, please contact the manufacturer or their authorized representative:

  • Manufacturer: Guangzhou Yiksen Trading Co., Ltd.
  • EU Authorized Representative: MJCM SARL, 78 avenue des Champs-Élysées Office 326, Paris.

A detailed user manual in PDF format is also available for download. Please refer to the seller's product page for the direct link to the PDF document: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.