HIHAILE Industrial Plug and Socket Series

Contents

HIHAILE IP67 Industrial Plug and Socket User Manual

Model: Industrial Plug and Socket Series

Brand: HIHAILE

1. Product Overview

This manual provides instructions for the HIHAILE IP67 Waterproof Explosion-proof Industrial Plug and Socket series. These products are designed for industrial applications, offering robust performance and protection against water and dust.

Key Features:

  • Safe & Reliable: Flame-retardant plastic, overload protection (some models), meets IEC/GB standards, color-coded voltage.
  • High Durability: Impact-resistant housing, nickel-plated copper for long life.
  • Multiple Specs: Available in 16A, 32A, 63A, and 125A current ratings, with 3, 4, or 5 pin options.
  • Protection: IP44 (splash-proof) for indoor/outdoor use; IP67 (dust/immersion) for harsh environments.
  • Flexible: Can be combined with plugs, couplers, and surface/panel sockets for extension or conversion.

2. Important Safety Warnings

  • Correct Protection: Always ensure the correct IP44 or IP67 protection level is used for the intended environment.
  • Voltage Matching: Match the plug/socket voltage to the equipment rating precisely.
  • Proper Connection: Align pins carefully and avoid forced plugging or unplugging to prevent damage.
  • Rated Current: Do not exceed the rated current (16A/32A/63A/125A) of the device.
  • Safety warning symbol for children

    Child Safety: Keep away from children; not for child operation.

3. Setup and Installation

Follow these steps for proper installation and connection of your industrial plug and socket:

  1. Select Correct Rating: Choose the appropriate current rating (16A/32A/63A/125A) and pole configuration (3/4/5 pin) based on your equipment's power requirements.
  2. Power Off: Ensure the equipment is completely OFF before attempting any connections.
  3. Insert Plug: Insert the plug fully into the socket. If available, engage any locking mechanism to ensure a secure and good contact.
  4. Unplugging: Always turn off the equipment before unplugging the device.
  5. Assembly: For combination products (plug + coupler + panel), assemble them as per the provided diagrams.

Visual Guide:

IP67 Inward Tilt Sockets with 3P, 4P, 5P configurations and technical diagrams
Figure 1: Various IP67 Inward Tilt Sockets showing 3P, 4P, 5P configurations and technical diagrams.
Multiple views of the IP67 Inward Tilt Socket, highlighting different angles and the back wiring
Figure 2: Different views of the IP67 Inward Tilt Socket, including back wiring details.
Close-up of the IP67 Inward Tilt Socket, showing the internal pin configuration
Figure 3: Internal pin configuration of the IP67 Inward Tilt Socket.
16A Inward Tilt Sockets in blue and red, showing 3P, 4P, 5P options
Figure 4: 16A Inward Tilt Sockets with various pole options.
32A Inward Tilt Sockets in blue and red, showing 3P, 4P, 5P options
Figure 5: 32A Inward Tilt Sockets with various pole options.
IP67 Inward Tilt Socket, Model 4142, 16A 4P 380V-415V, red, with multiple views
Figure 6: Model 4142, 16A 4P 380V-415V Inward Tilt Socket.
IP67 Inward Tilt Socket, Model 4132, 16A 3P 220V-250V, blue, with multiple views
Figure 7: Model 4132, 16A 3P 220V-250V Inward Tilt Socket.

4. Operating Instructions

Once properly installed, operating the industrial plug and socket is straightforward:

  1. Connect: Ensure the plug is fully inserted and secured into the socket.
  2. Power On: Turn on the power to the equipment.
  3. Disconnect: To disconnect, first turn off the equipment, then carefully remove the plug from the socket.

Product Demonstration Video:

Video 1: Product demonstration highlighting waterproof features, material quality, and different types of industrial plugs and sockets.

5. Maintenance and Care

To ensure the longevity and safe operation of your industrial plug and socket, observe the following:

  • Storage: Store the devices away from excessive heat, moisture, and corrosive substances. Keep them clean and dry.
  • Regular Inspection: Periodically inspect the plug and socket for any signs of damage, wear, or corrosion.
  • Discontinue Use: If any damage is found, immediately stop using the device and replace it if necessary.
  • Compatibility: Do not force the plug into incompatible sockets. The grounding pin position is designed to prevent mismating.

6. Troubleshooting (FAQs)

Q: Poor contact when connecting?
A: Check the socket blades for looseness or blockage. Wipe any oxidized pins. If the issue persists, replace the component or contact service.
Q: The plug/socket feels hot during use?
A: Slight warmth is normal. However, excessive heat indicates an overload or poor contact. Stop use immediately and investigate the cause. Ensure the current rating is not exceeded.
Q: How to identify the correct voltage?
A: Check the markings on the device, including the housing color and the grounding pin position (clock orientation), which indicate the voltage rating.

7. Specifications

Attribute Value
Brand Name HIHAILE
Application Industrial
Rated Current 16A, 32A, 63A, 125A
Rated Voltage 220V, 380V, 415V (220-250V, 380-415V)
Poles 3P, 4P, 5P
Waterproof Level IP67 (also IP44 for splash-proof applications)
Material Flame retardant, explosion-proof nylon
Shape Round
Certification CE, RoHS
EU LVD Voltage Below 50Vac or 75Vdc

Dimensional Diagrams:

Detailed technical diagram and dimensions for XM-4332/XM-4432 (63A, 125A, 3P+N+E, 220-250V/380-415V, IP67) and XM-4342/XM-4442 (63A, 125A, 3P+N+E, 380-415V, IP67)
Figure 8: Technical diagrams and dimensions for 63A and 125A models (XM-4332/XM-4432, XM-4342/XM-4442).
Detailed technical diagram and dimensions for XM-4142/XM-4242 (16A, 32A, 3P+N+E, 380-415V, IP67)
Figure 9: Technical diagrams and dimensions for 16A and 32A models (XM-4142/XM-4242).

For a detailed user manual with additional diagrams and information, please refer to the official PDF document: User Manual (PDF).

8. User Tips

  • Ensure Compatibility: Always double-check that the specific plug and socket models you are using are compatible, even if they share the same current rating (e.g., 32A). Variations in pin configuration or design can lead to mismatches.
  • Grounding Pin Orientation: Pay attention to the grounding pin's orientation (clock position) as it is a key indicator for voltage and compatibility.

9. Warranty and Support

For any quality issues or technical support, please contact HIHAILE official customer service or an authorized service center. Keep your purchase records for warranty claims.

Certifications:

Verification of LVD Compliance certificate for industrial plugs
Figure 10: Verification of LVD Compliance certificate, indicating adherence to safety standards.

© 2024 HIHAILE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.