WenQia PT2262-433.92mhz rf remote control

Contents

WenQia 433 Mhz Wireless RF Remote Control Switch User Manual

Model: PT2262-433.92mhz RF Remote Control

1. Introduction

This manual provides instructions for the WenQia 433 Mhz Wireless RF Remote Control Switch, an EV1527 learning code transmitter designed for various applications such as garage doors, gates, and lighting systems. Please read this manual carefully before use to ensure proper operation and safety.

This remote control is a common RF transmitter. It is designed to work with compatible 433MHz receivers. If you require a programmable or cloning remote, please ensure you purchase the correct type as this model is a fixed learning code transmitter.

2. Important Safety Information

  • Signal Pairing Required: Before using the remote control, signal pairing with a compatible receiver is essential. The remote will not function without proper pairing.
  • Keep the remote control away from water and extreme temperatures.
  • Do not attempt to disassemble or modify the remote control, as this may void the warranty and cause malfunction.
  • Dispose of batteries responsibly according to local regulations.
Important notice in multiple languages stating that signal pairing is required before using the remote control.

Important notice regarding signal pairing before use.

3. Package Contents

Your package should contain the following items:

  • 1 x Wireless RF Remote Control (2, 3, 4, or 8 buttons, depending on model purchased)
  • 1 x 23A 12V Battery (pre-installed or included separately)
Overview of different models of the 433 Mhz Wireless RF Remote Control Switch, including 2, 3, 4, and 8 button versions, and the required 23A 12V battery.

Various models of the remote control and the included 23A 12V battery.

4. Specifications

Feature Specification
Brand Name WenQia
Model Number PT2262-433.92mhz RF Remote Control
Working Voltage DC 12V
Power Supply One 23A 12V Battery (Included)
Working Current ≤ 10mA
Radiation Power ≤ 10mW
Timing Resistor 4.7M
Modulation Mode ASK (Amplitude Modulation)
Working Frequency 433 MHz
Transmission Distance Up to 500m (in open field)
Encoder Type EV1527 Learning Code
Weight 38g (including battery)
Dimensions 90mm x 40mm x 14mm
Buttons Available 2, 3, 4, or 8 buttons
Shell Material Plastic
Buckle Material Metal
Certifications CE, RoHS
Typical Uses Garage doors, gates, lighting, automated curtains, electric doors, fans, motors, switches, universal control for various devices.
Application Scenarios Family, Farm, Factory, Office, Supermarket
Detailed diagram of the remote control showing dimensions, components like flexible antenna, indicator light, silicone buttons, and a wall-mounted holder. Key specifications like 433MHz frequency, EV1527/2262 code, and 23A 12V battery are also noted.

Diagram illustrating remote control features and specifications.

Diagram illustrating the 500m control distance for the 433MHz RF remote controls, highlighting the 1527 learning code and showing different remote models.

Illustration of the 500m control distance and learning code type.

5. Setup Instructions

5.1 Battery Installation

The remote control uses one 23A 12V battery. If the battery is not pre-installed or needs replacement, follow these steps:

  1. Carefully open the battery compartment cover, usually located on the back or side of the remote. This may involve sliding a cover or gently prying it open.
  2. Insert the 23A 12V battery, ensuring the positive (+) and negative (-) terminals match the indicators inside the compartment.
  3. Close the battery compartment cover securely.
Remote control with the battery compartment open, showing the 23A 12V battery inside.

Battery compartment showing the 23A 12V battery.

Remote control with the battery compartment open, illustrating battery insertion.

Illustration of battery insertion into the remote control.

5.2 Signal Pairing (Learning Code)

This remote control uses an EV1527 learning code. To operate your device, it must be paired with a compatible 433MHz receiver. The pairing process typically involves the receiver entering a 'learning' mode and then receiving a signal from the remote control.

Important: The specific pairing steps are determined by your receiver. Please refer to the instruction manual of your 433MHz receiver for detailed pairing procedures. Generally, the process involves:

  1. Put your receiver into learning mode (e.g., by pressing a 'Learn' button on the receiver).
  2. Press any button on the WenQia remote control.
  3. The receiver should indicate successful pairing (e.g., an LED flashes or turns off).

If you encounter difficulties, consult the receiver's manufacturer or support resources.

6. Operation

Once successfully paired with your receiver, the remote control buttons will activate the corresponding functions on your connected device.

  • Press a button: Each button (A, B, C, D or 1, 2, 3, 4, etc.) corresponds to a specific channel or function on your paired receiver. Press the desired button to send the command.
  • Indicator Light: The remote control has an indicator light that illuminates when a button is pressed, confirming that a signal is being transmitted.
  • Range: The effective transmission distance is up to 500 meters in an open field. Obstacles such as walls, buildings, and other RF interference can reduce this range.

7. Maintenance

7.1 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7.2 Battery Replacement

If the remote control's indicator light becomes dim or fails to light up when a button is pressed, or if the transmission range decreases significantly, it's time to replace the 23A 12V battery. Follow the battery installation steps in Section 5.1.

8. Troubleshooting

Problem Possible Cause Solution
Remote does not work / Device does not respond. Not paired with receiver, low battery, incorrect frequency, receiver malfunction. Ensure the remote is properly paired with your receiver (see Section 5.2). Replace the battery if necessary. Verify your receiver operates on 433MHz. Check the receiver's status.
Indicator light does not flicker or stays on constantly. Faulty battery, internal circuit issue, or incorrect button press. Replace the 23A 12V battery. If the issue persists, the remote may be faulty.
Reduced transmission range. Low battery, environmental interference, physical obstructions. Replace the battery. Minimize obstructions between the remote and receiver. Avoid sources of strong RF interference.

9. User Tips

  • Frequency Confirmation: This remote operates at 433 MHz. Ensure your receiver is compatible with this frequency (e.g., 433.92 MHz).
  • Versatile Use: This remote can be used for various applications beyond just garage doors, including LED spot lights (on/off, dimming if the receiver supports it), automated curtains, and other smart home devices. Always check compatibility with your specific receiver.
  • Color Options: The remote is available in different colors, such as white, yellow, black, and gray, corresponding to different model numbers (e.g., PT22622A, PT22623A, PT22624A, PT22628A).

10. Warranty and Support

For technical support or inquiries, please contact the manufacturer:

  • Manufacturer: Huizhou Wenqiao Electronic Technology Co., Ltd.
  • Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
  • WhatsApp: +86 135 0227 8583 / +86 181 3880 5271
  • Email: dieseelectronic@163.com

A detailed user manual in PDF format may also be available. Please refer to the official product page or contact support for the latest version of the User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.