1. Product Information
Product Name: LED Dynamic Side Marker Turn Signal Light
Batch/Serial Number: Signal Light
Manufacturer & EU Representative Information
Manufacturer: Guangzhou yangchi auto parts co.LTD
Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
E-Mail: ouyan99@dingtalk.com
Telephone: 86-18102513142
EU Authorized Representative: CET PRODUCT SERVICE LTD
Address: Osterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: +4971416432236
Compliance Information
This product is certified with DOT SAE and E Mark standards. For detailed compliance information, refer to the official PDF user manual.
Note: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Specifications
| Attribute | Value |
|---|---|
| Voltage | 12 V |
| Interface Type | T10 (W5W/194) |
| Lumens | 2400LM |
| Item Weight | 0.1kg |
| Item Type | Turn Signal |
| Origin | Mainland China |
| Includes | One pair (right and left) |
| Certifications | DOT SAE, E Mark |
| Dimensions | Length: 6.5cm, Width: 3cm |
For a visual representation of the product dimensions, refer to the image below:

The product is designed for various vehicle models, including:
- For Nissan INTERSTAR Bus (X70)
- For Nissan INTERSTAR Pritsche/Fahrgestell
- For Nissan PRIMASTAR Bus (X83)
- For Nissan PRIMASTAR Kasten (X83)
- For Nissan KUBISTAR(X76)
- For Opel MOVANO Combi (J9)
- For Renault ESPACE III (JE0_)
- For Renault TWINGO I (C06_)
- For mercedes-benz Smart FORTWO Coupe (453)
- For mercedes-benz Smart FORTWO Cabriolet (453)
- For Renault 19 II (B/C53_)
- For Renault MASTER II Bus (JD)
- For Renault MEGANE I (BA0/1_)
- For Renault LAGUNA I (B56_, 556_)
4. Setup & Installation
The LED Dynamic Side Marker Turn Signal Lights are designed for easy installation, replacing your vehicle's original OEM signal lights.
Installation Steps:
- Carefully remove the original car parts to access the internal screws/clips of the existing side marker light.
- Loosen the screws/clips to further remove the cover/cap of the original signal light.
- Disconnect the OEM halogen bulb from its socket.
- Insert the new Malcayang LED Dynamic Side Marker Turn Signal Light connector into the OE socket.
- Ensure the OE socket is properly seated into the new light to prevent water ingress.
- Secure the new LED light in place using the original screws/clips and reattach any removed car parts.

A visual overview of the product and its components can be seen below:

5. Operating Instructions
The Malcayang LED Dynamic Side Marker Turn Signal Lights provide a sequential flashing effect, enhancing visibility and modernizing your vehicle's appearance. When activated, the LEDs illuminate in a dynamic, flowing pattern from one end to the other, clearly indicating your turn.
Dynamic Flashing Demonstration:
The lights are available in different lens finishes, such as clear and smoked, to match your vehicle's aesthetic.



6. Maintenance
To ensure the longevity and optimal performance of your LED Dynamic Side Marker Turn Signal Lights, follow these simple maintenance guidelines:
- Cleaning: Regularly clean the lens with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the lights for any signs of damage, cracks, or loose connections. Ensure the seals are intact to prevent moisture ingress.
- Connection Check: If you experience intermittent flashing or dimming, check the electrical connections to ensure they are secure and free from corrosion.
- Storage: If removing the lights for any reason, store them in a dry, cool place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your LED Dynamic Side Marker Turn Signal Lights, refer to the following troubleshooting tips:
- Lights Not Illuminating:
- Check the electrical connection to ensure it is properly seated and secure.
- Verify that the vehicle's turn signal system is functioning correctly (e.g., check fuses, other signal lights).
- Ensure the vehicle's battery has sufficient charge.
- Incorrect Flashing Pattern or Hyper-flashing:
- This may indicate an issue with the vehicle's flasher relay or a need for load resistors if the vehicle's system expects a higher wattage from traditional bulbs. Consult a professional if unsure.
- Ensure the lights are correctly installed and not loose.
- Moisture Inside the Lens:
- This could indicate a compromised seal. Inspect the light for cracks or gaps. If moisture persists, the light may need to be replaced to prevent electrical damage.
If these steps do not resolve the issue, please contact customer support or a qualified automotive technician.
8. User Tips
- Verify Fitment: Before purchasing, double-check the compatibility list to ensure the lights are suitable for your specific vehicle model and year.
- Easy Installation: Many users find these lights straightforward to install, often requiring only basic tools.
- Quality Check: Although generally of good quality, always inspect the product upon arrival for any manufacturing defects before installation.
9. Frequently Asked Questions (FAQ)
- Q: What is the primary function of this item?
A: The item is designed for sequential flashing, providing a dynamic turn signal effect. - Q: Is this product compatible with Renault Clio 2?
A: Yes, it is suitable for Renault Clio 2. - Q: Is this product sold as a single unit or a pair?
A: The product includes one pair (right and left) of lights.
10. Warranty & Support
For detailed warranty information and customer support, please refer to the official user manual PDF provided by the manufacturer. This document contains comprehensive details regarding product guarantees, return policies, and contact information for technical assistance.
You can access the official user manual PDF here.