RIDEN DPS5015

Contents

RIDEN DPS5015 Digital Control Power Supply User Manual

Model: DPS5015

Constant Voltage/Current DC Step-down Power Supply

1. Introduction

The RIDEN DPS5015 is a compact and powerful digital control power supply that combines analog adjustment with digital control. It is designed for enthusiasts and laboratory workers, offering non-volatile parameter storage and 10 programmable preset memory data groups. The unit features an LCD display for monitoring set voltage, set current, output voltage, output current, output power, and input voltage. It supports various modes of operation, abnormal condition warnings, and protection settings.

The DPS5015 is available in three versions: Non-communication, USB communication, and USB + Bluetooth communication. Communication versions can connect to a PC or an Android mobile phone.

2. Safety Precautions

  • This module is a DC-DC step-down converter. Ensure the input voltage is at least 1.1 times higher than the output voltage.
  • The input voltage range is DC 6.00-60.00V. NEVER connect AC power or AC Mains supply (e.g., 220V) to this unit.
  • Do not reverse the battery when charging, as this will cause damage to the product.
  • Exceeding the input voltage limit, using AC as input, wiring errors, or battery charging in reverse will cause irreversible damage.
  • If using a power supply with an output capacity higher than 20A, ensure the power switch is placed at the input of the input power supply.
  • Under natural heat dissipation conditions, the unit can output at full load. For sustained high-power operation, it is recommended to install a fan in the casing.
  • Ensure all display module cables are connected correctly; improper connection will prevent the display from working.

3. Package Contents

Upon opening the package, verify that all components are present and undamaged:

  • Display/Control Part
  • Power Part (Main Board)
  • USB Communication Module (for USB/USB+BT versions)
  • Bluetooth Communication Module (for USB+BT version)
  • Connecting Cables (for display, key, and communication modules)
  • Menu Card / User Manual (PDF available online)
DPS5015 components in packaging

Figure 3.1: DPS5015 power supply components (display and power board) packaged in anti-shock foam within a retail box.

DPS5015 components

Figure 3.2: Components of the DPS5015 power supply: display unit, main power board, USB module, Bluetooth module, and connecting wires.

4. Product Overview

The DPS5015 consists of a display/control unit and a separate power conversion board. The display unit features a 1.44-inch full-color LCD screen, a rotary encoder for adjustments, and control buttons.

RIDEN DPS5015-USB-BT Digital Control Power Supply

Figure 4.1: Digital Control Power Supply DPS5015-USB-BT with display unit, power board, USB board, Bluetooth board, and PC/mobile application interfaces.

DPS5015 power board close-up

Figure 4.2: Close-up view of the DPS5015 power board, showing components like the fan, inductor, capacitors, and connectors.

4.1 Panel Description

The display panel includes:

  • V/+ (A): Voltage setting / Up Arrow / Shortcut to recall M1 Data Group.
  • SET (B): Data entry / Extract data from specified Data Group.
  • A/- (C): Current setting / Down Arrow / Shortcut to recall M2 Data Group.
  • LCD Screen (D): 1.44 inch full color display.
  • Rotary Control (E): Data adjustment / Keypad lock.
  • ON/OFF (F): Output On / Off button.

5. Setup

5.1 Connection Description

Carefully connect the display unit, power board, and communication modules using the provided cables. Ensure correct polarity for input and output connections.

DPS5015 connection diagram

Figure 5.1: Dimensional drawing of the DPS5015 display module (79x43x39mm) and power module (93x71x41mm), along with the 200mm connecting cable. This image also implicitly shows the connection points.

Power Part Connection Instruction:

  • IN+: Input positive
  • IN-: Input negative
  • OUT+: Output positive
  • OUT-: Output negative
  • LCD: Screen Cable, connect to the display panel LCD
  • KEY: Button Cable, connect to the display panel KEY

5.2 PC Software Installation and Use (for USB/USB+BT versions)

System Requirement: Windows 7 or above (genuine system recommended).

5.2.1 Driver Installation

  1. Open the package and double-click CH341SER.EXE to install the communication board driver.
  2. After driver installation, connect the digital power supply and communication module with cables, then connect to your computer via a Micro USB cable.
  3. Right-click

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.