Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your IANLOV Nordic Modern Long Chandelier, model IL-G0159. Please read this manual thoroughly before installation and keep it for future reference.
Package Contents
Before beginning installation, ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to assemble the product.

Figure 1: Chandelier Components
- Ceiling canopy and mounting bracket
- Hanging pipes (20cm, 30cm, 30cm - can be joined)
- Main horizontal bar with light holders
- GU10 LED bulbs (included, replaceable)
- Mounting hardware (screws, wire connectors)
- Suspension wire
Setup and Installation
WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation. Installation should be performed by a qualified electrician if you are unsure.

Figure 2: Chandelier Dimensions (Example for multi-head)

Figure 3: Single Head Dimensions and Bulb Type
Refer to the detailed installation diagram below for visual guidance:

Figure 4: Installation Manual Diagram
Installation Steps:
- Prepare Mounting Location: Ensure the ceiling can support the weight of the fixture. Turn off power at the main circuit breaker.
- Assemble Hanging Pipes: The hanging pipes (20cm, 30cm, 30cm) can be spliced together to achieve the desired length. Rotate clockwise after alignment to secure.
- Mount Ceiling Canopy: Attach the mounting bracket to the ceiling junction box. Secure the ceiling canopy to the bracket.
- Wiring Connections:
- Connect the red wire from the fixture to the positive (+) wire (usually black or red from the ceiling).
- Connect the blue wire from the fixture to the negative (-) wire (usually white or blue from the ceiling).
- Connect the yellow ground wire from the fixture to the ground wire from the ceiling (usually green or bare copper).
- Use appropriate wire connectors and ensure all connections are secure.
- If you cut off excess wires, reconnect them in the original way and pay attention to insulation.
- Attach Main Fixture Body: Secure the main horizontal bar assembly to the hanging pipe and ceiling canopy. Adjust the suspension wire for balance if applicable.
- Install Bulbs: Insert the GU10 LED bulbs into the lamp holders.
- Final Check: Ensure all screws are tightened and wires are securely connected.
- Test: Restore power at the circuit breaker and test the light fixture.
Important Installation Remarks:
- Test the fixture before final installation.
- Do not pull the wires excessively during installation.
- All screws must be tightened and wires securely connected.
Operating Instructions
- Power On/Off: The chandelier is operated via a standard wall switch (Knob switch type). Flip the switch to turn the lights on or off.
- Light Source: This fixture uses GU10 LED bulbs. The included bulbs are 5W.
- Dimmability: This fixture is NOT dimmable. Do not connect to a dimmer switch.
Maintenance
- Cleaning: Turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: Ensure power is off. Allow bulbs to cool before touching. Gently twist and pull out the old GU10 bulb. Insert the new GU10 bulb by aligning the pins and twisting to secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power; loose wiring; faulty bulb | Check circuit breaker; ensure all wires are securely connected; replace bulb. |
| Light flickers | Loose wiring; incompatible bulb; faulty bulb | Check wiring connections; ensure bulbs are GU10 LED; replace bulb. |
| Fixture is crooked | Uneven mounting; bent components | Adjust mounting screws; gently straighten any bent parts (refer to User Tips). |
User Tips
- Straightening Wires: Due to long-distance transportation, the suspension wires may not be perfectly straight. To straighten them, gently wrap the wires with a wet towel and rub them back and forth 5 to 10 times. This can help them become much straighter.
- Aesthetic Alignment: If any parts appear slightly crooked after installation, gently adjust them by hand. The fixture is designed to be robust but allows for minor adjustments.
Specifications
| Brand Name | IANLOV |
| Model Number | IL-G0159 |
| Voltage | 90 - 260 V |
| Light Source | LED bulbs (GU10 base) |
| Base Type | GU10 |
| Power (Max) | Rated maximum power 100W (for the fixture) |
| Luminous Flux | 2000-82000 (depending on bulbs) |
| Lighting Area | 10-15 square meters |
| Installation Type | Pipe Erected (Assembly) |
| Material | Aluminum |
| Finish | Brushed Nickel (Technics: Forged) |
| Number of Light Sources | Varies by model (e.g., 1, 3, 4, 5) |
| Lampshade Color | Black |
| Hanging Pipe Length | 20+20+30CM (Joined together) |
| Is Dimmable | No |
| Certification | CCC, CE |
Package Dimensions:
- Length: 90 cm
- Width: 18 cm
- Height: 15 cm
- Weight: 2.2 kg
Warranty and Support
This IANLOV chandelier comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For any questions, technical assistance, or warranty claims, please contact the seller or retailer from whom you purchased the product.
An additional user manual in PDF format may be available for download: View User Manual (PDF)