Introduction
This manual provides essential information for the safe and efficient use of your LIDESENS PIR LED Light Bulb. This GU10 bulb features an integrated Passive Infrared (PIR) motion sensor for automatic lighting in various indoor and sheltered outdoor applications.
For a comprehensive guide, you may also refer to the official user manual PDF: View User Manual (PDF)
Safety Warnings & Important Notes
WARNING: HIGH TEMPERATURE!
- Do not touch the light when it is working or has just been switched off, as it may be hot.
Important Notes for Operation:
- The PIR LED lights will work both day and night. Whenever a person comes close, it will activate automatically for approximately 30 seconds and then turn off.
- Ensure the IR sensor is directed towards the area where human movement is expected.
- Do not use any cover around the PIR LED lights that might obstruct the sensor.
- Avoid installing the PIR LED lights near heat sources.
- Do not use two PIR LED lights in the same room or too close to each other. They may interfere, causing only one PIR light to function correctly.
Specifications
| Feature | Detail |
|---|---|
| Name | LED Light PIR |
| Model | LDS-GU10PIR-6W |
| Power Consumption | 6W |
| Light Source | LED |
| Optical Flux | 500LM |
| Input Voltage | AC 85-265V |
| Color Temperature (CCT) | Warm White 3000K, White 6000K (Range: 3000~6000K) |
| Installation Base | GU10 |
| Beam Angle | 120° |
| Color Rendering Index (CRI) | >80 |
| Material | ABS |
| Size | Φ50 x 60mm (1.97 x 2.36 inches) |
| Safety Protection | Over-Current Protection, Short-Circuit Protection, Over-Voltage Protection, High Voltage Surges Protection |
| Origin | Mainland China |
Light Color Options

Image: Comparison of Warm White (3000-3500K) and White (6000-6500K) light colors.
Product Dimensions

Image: Front view of the GU10 PIR LED bulb with dimensions (50mm width, 60mm height).
Installation & Setup
Before Installation:
- Always turn off the power supply before installing or replacing the bulb.
- Verify that your electrical system's voltage is within the AC 85-265V range. Using an incorrect voltage may cause the light to be dim or fail.
Installation Reference:

Image: Correct and incorrect installation positions for the PIR sensor bulb.
The bulb is designed for GU10 sockets. Ensure the sensor faces downwards or towards the area where motion detection is desired. Avoid installing in fixtures where the sensor would be covered or pointed upwards, as this can hinder its functionality.
Operating Instructions
Motion Sensor Functionality:

Image: PIR sensor operation and usage guidelines.
- The bulb's PIR sensor detects motion and automatically turns on the light.
- The light will remain on for approximately 30 seconds after motion is detected. If no further motion is detected, it will turn off.
- The sensor operates effectively in both daylight and nighttime conditions.
- Optimal installation height for the sensor is between 3 to 5 meters.
Recommended Applications:

Image: Various suitable application areas for the PIR LED bulb.
This bulb is ideal for areas requiring temporary lighting, such as hallways, stairwells, basements, garages, porches, entryways, balconies, and patios. It helps conserve energy by ensuring lights are only on when needed.
Product Demonstration Video:
Video: A short demonstration of the PIR LED light bulb's motion sensing capabilities.
Maintenance
- Ensure the power is off before cleaning the bulb.
- Wipe the bulb and sensor gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Keep the sensor clear of dust, dirt, or any obstructions to ensure optimal performance.
- This product is not designed for use in wet environments. Avoid exposure to water or high humidity.
Troubleshooting
Common Issues & Solutions:
- Light turns on/off continuously without activation: This can occur if the sensor is obstructed, too close to a heat source, or if another PIR light is interfering. Review the "Important Notes for Operation" section regarding placement and environmental factors.
- Light is dim or does not work: Verify that the input voltage matches the bulb's specifications (AC 85-265V). Incorrect voltage can cause performance issues or damage.
- Light does not detect motion: Ensure the PIR sensor is not covered and is facing the intended detection area. Check for any nearby infrared sources that might interfere.
- Light turns on multiple times after initial turn-off: This is normal behavior for some PIR sensors. The bulb may re-detect residual motion or environmental changes before settling into standby mode.
User Tips
- These bulbs are highly effective in walk-in closets and entrances, providing light only when needed and helping to save energy.
- When installing multiple PIR bulbs, ensure they are spaced adequately (e.g., at least 1 meter apart) to prevent interference.
- The motion detection range is effective from at least 2 meters, making it suitable for various room sizes and pathways.
Frequently Asked Questions (FAQ)
Q: Is this lamp dimmable?
A: Generally, PIR LED bulbs with integrated sensors are not designed to be dimmable. The specifications for this model do not indicate dimmability.
Warranty & Support
LIDESENS provides a quality warranty for one year from the date of purchase. During this period, repairs will be conducted free of charge. Technical support is available for the lifetime of the product.
Contact Information:
- Email: sales@lidesens.com
- Whatsapp: +0086-18033449799
Certifications
This product is compliant with the following certifications:
- CE
- RoHS
- SAA
- FCC

Image: Certificates of Compliance for the product.