1. Important Safety Information
- WARNING: BE CAREFUL OF HIGH TEMPERATURE! LED bulbs can become hot during operation.
- Do not touch the light when it is working or has just been switched off. Allow sufficient time for the bulb to cool down before handling.
- Always turn off the power supply at the main switch before installation, removal, or maintenance.
- Ensure the voltage of your electrical system matches the voltage requirements of the bulb. Using an incorrect voltage can damage the bulb or cause it to operate improperly.
- Do not disassemble or modify the bulb.
- Keep out of reach of children.
2. Product Overview
LIDESENS LED Spotlight Bulbs are designed for various indoor lighting applications, offering energy efficiency and long lifespan. They are available in multiple base types to suit different fixtures.

Figure 1: LIDESENS LED Spotlight Bulbs (Example Pack)
2.1 Base Types and Dimensions
These bulbs are available with different bases to fit various light fixtures. Please identify your required base type before installation.

Figure 2: Bulb Base Types and Dimensions (All dimensions in mm)
- E27: 50mm diameter, 57mm height
- GU10: 50mm diameter, 57mm height
- MR16: 50mm diameter, 51mm height
- E14: 50mm diameter, 60mm height
2.2 Light Color Options
LIDESENS LED bulbs are available in different color temperatures to suit your preference and application.

Figure 3: Light Color Comparison
- Warm White (3000-3500K): Provides a cozy and inviting atmosphere.
- White (6000-6500K): Provides a bright, crisp, and modern light.
3. Setup and Installation
- Power Off: Before starting any installation, ensure the power supply to the light fixture is completely turned off at the circuit breaker or main switch.
- Verify Voltage: Check the voltage rating on your new LIDESENS LED bulb and ensure it matches the voltage of your light fixture and electrical system. Available voltage options include AC/DC 12V (typically for MR16), AC 110-130V, and AC 220-240V. Using an incorrect voltage will cause the light to be very dim or fail.
- Insert Bulb: Carefully insert the LED bulb into the compatible light fixture socket. For GU10 bases, align the pins and twist to lock. For MR16, E27, and E14 bases, push or screw in gently until secure.
- Power On: Once the bulb is securely installed, restore power to the light fixture.
- Test: Turn on the light switch to confirm the bulb is working correctly.

Figure 4: Bulb Construction and Base Types
4. Operating Instructions
LIDESENS LED Spotlight Bulbs are designed for simple operation:
- Once installed, operate the bulb using your standard light switch.
- These bulbs are suitable for various indoor lighting environments, including recessed lighting, track lighting, and general accent lighting.

Figure 5: Indoor Lighting Applications
Note: These bulbs are generally not dimmable unless explicitly stated on the product packaging or specifications. Attempting to use them with a dimmer switch may cause flickering or damage.
5. Maintenance
LIDESENS LED bulbs require minimal maintenance due to their long lifespan and durable construction.
- Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the bulb for any visible damage. If damaged, replace the bulb immediately.
6. Troubleshooting
- Bulb does not light up:
- Check if the power supply to the fixture is on.
- Ensure the bulb is correctly seated in the socket.
- Verify that the bulb's voltage matches the fixture's voltage.
- Test the bulb in another working fixture if possible.
- Bulb is dim or flickers:
- Incorrect voltage supply is a common cause. Ensure the voltage matches the bulb's specifications.
- If used with a dimmer, ensure the bulb is explicitly rated as dimmable. Non-dimmable bulbs will flicker or be damaged by dimmer switches.
7. Specifications
Specifications may vary slightly depending on the specific model (base type and voltage). Please refer to the markings on your individual bulb for precise details.
| Feature | Specification |
|---|---|
| Brand | LIDESENS |
| Item Type | Spotlight |
| Power Consumption | 5W |
| Light Source | LED bulbs (2835 LED chips) |
| Optical Flux | 500LM (approx. 35W equivalent) |
| Input Voltage Options | AC/DC 12V, AC 110-130V, AC 220-240V (specific to model) |
| Color Temperature (CCT) | Warm White (3000-3500K), White (6000-6500K) |
| Installation | Embedded |
| Beam Angle | 24° |
| Color Rendering Index (CRI) | >80 |
| Material | Aluminum + PC (Plastic clad aluminum) |
| Safety Protection | Over-Current, Short-Circuit, Over-Voltage, High Voltage Surges Protection (Smart IC Drive) |
| Is Bulbs Included | Yes |
| Is Dimmable | No |
| Certifications | CE, RoHS, SAA, FCC |
| Origin | Mainland China |
7.1 Original User Manual (GU10 Specific)
For specific details on the LDS-GU10P-5W model, please refer to the original user manual content below. A PDF version of the user manual may also be available from the seller.
User Manual (LDS-GU10P-5W)
- Warning: BE CAREFUL OF HIGH TEMPERATURE!
- Brand Name: LIDESENS
- Specifications:
- Name: LED Light
- Model: LDS-GU10P-5W
- CCT: White 6000K
- Power: 5W
- Size: Φ50*60mm
- Lumen: 500LM
- Voltage: AC 85-265V
- MADE IN CHINA
- CEFC PS E SAA12287
- Notes - MUST READ:
- Turn off the power before installation.
- Check and make sure your volt is AC 100-240V. Wrong volt will make the light very dim or die.
- Don't touch the light when it is working or is switched off just now.
8. Warranty and Support
8.1 Warranty Information
LIDESENS LED Spotlight Bulbs typically come with a warranty period ranging from 6 months to 1 year from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For specific warranty terms and conditions, please refer to the seller's policy at the time of purchase.
8.2 After-Sale Service and Support
If you have any questions, encounter issues, or require technical assistance, please contact LIDESENS customer support:
- Email: sales@lidesens.com
- WhatsApp: +0086-18033449799
9. User Tips
- Check Your Pack: These bulbs are often sold in multi-packs (e.g., 4 pieces per lot). Ensure you have received the correct quantity.
- Match Base and Voltage: Double-check the base type (MR16, GU10, E27, E14) and voltage (12V, 110-130V, 220-240V) of your existing fixtures before purchasing and installing to ensure compatibility.
- Consider Light Color: Choose Warm White for a cozy ambiance in living rooms and bedrooms, and White for brighter, more functional lighting in kitchens, offices, or commercial spaces.