1. Important Safeguards and Warnings
It is recommended to read these instructions before use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
WARNING!
- Avoid immersing the AC charging connection device in water.
- Do not step on, pull, bend, or knot the charging cable.
- Do not insert foreign objects into any part of the Charging vehicle connector.
- Refrain from dropping the control box or placing heavy objects on its surface.
- Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
- Ensure the operating ambient temperature of the equipment remains within the range of -30°C to +55°C.
- Don't use the charger when you, the vehicle, or the charger is exposed to severe rain.
- Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
- Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
- Do not attempt to open, disassemble, repair, tamper with, or modify the charger.
- This product is exclusively designed for electric vehicle charging purposes.
- Avoid using external wires or adapters.
- This product must be well-grounded when used.
- Never insert your fingers into the charging plug.
- The EV charger is not user serviceable. Contact us at tina@feyree.com for any repairs.
- If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
- Never allow children to play with the charger cable.
- To avoid the risk of fire or electric shock, do not use this device with an extension cord.
- Using a worn or damaged AC outlet may cause burns or start a fire.
- Risk of explosion. This equipment has an arc or sparking parts that should not be exposed to flammable vapors.
- Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION! Please Note Before Start Charging
Precautions 1:
- It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. To avoid serious injury or death; installation must comply with local codes.
- This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
Precautions 2:
- Ensure the power plug and socket are compatible before initiating the charging process.
- Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. In case the socket is dirty or wet, please disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
- Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.
2. Setup
2.1 Unpacking
Carefully unpack the charger and check for any signs of damage. Ensure all components are present: the portable EV charger unit with attached cables (CEE plug and EV connector) and a carrying bag.
2.2 Placement and Environment
Place the charger in a location that is dry, well-ventilated, and within the specified operating temperature range of -30°C to +55°C. Avoid direct sunlight, rain, or extreme humidity. Ensure the control box is not obstructed.
2.3 Electrical Requirements and Grounding
The charger operates on a voltage range of 85V-264V. It is crucial that the electrical outlet used is properly grounded. If you are unsure about your electrical installation, consult a qualified electrician. Do not use the charger with ungrounded outlets or damaged wiring.
2.4 Connecting the Charger
- Ensure the power source (CEE socket) is capable of providing the desired current (up to 32A for 7KW models).
- Plug the CEE plug of the charger firmly into the compatible wall socket.
- Verify that the charger's control box display powers on.
3. Operating Instructions
3.1 Control Box LCD Display Overview
The LCD display provides real-time information about the charging process. Below is a diagram illustrating the various indicators:
Display Indicators:
- Ground Check (PE): Indicates grounding status.
- Charging Status: Shows if charging is active.
- Set Current: The maximum current set for charging (e.g., 32A, 16A).
- Charging Voltage: Real-time voltage (e.g., 220.6V, 380V).
- Real-time Temperature: Internal temperature of the charger (e.g., 31°C).
- Charging Current: Actual current being drawn by the vehicle (e.g., 32.0A, 16.0A).
- Real-time Power: Instantaneous power delivery (e.g., 7.06Kw).
- Power Consumption: Total energy consumed during the current session (e.g., 0.00Kwh).
- Charging Time: Duration of the current charging session (e.g., 00:00:00).
3.2 Adjusting Charging Current
Before connecting to your vehicle, you can adjust the charging current:
- With the charger plugged into the power source but not yet connected to the EV, tap button "A" on the control box.
- Each tap will cycle through available current settings (e.g., 8A-10A-13A-16A-20A-25A-32A).
- Select the desired current. The charging current set shouldn't be higher than the supply current, otherwise there may be a safety hazard.
3.3 Charging Steps
- Adjust Current: As described above, set the desired charging current using button "A".
- Plug in the Charging Connector: Connect the EV charging plug (Type1 or Type2) firmly into your electric vehicle's charging port. The charging process should initiate automatically.
3.4 Ending Charging
There are several ways to end the charging session:
- Plan A (Automatic Stop): The charger will automatically stop charging when the car is fully charged. You can then directly unplug the EV connector.
- Plan B (Power Switch): Turn off the main power switch to the outlet where the charger is connected. Then, unplug the EV connector from your vehicle.
- Plan C (Vehicle Control): Stop charging from your electric vehicle. Most EVs have a stop charging button or function within the car's infotainment system or app. Once charging is stopped by the vehicle, unplug the EV connector.
WARNING: Do not unplug the EV connector from the vehicle during active charging without first stopping the charging process.
4. Maintenance
4.1 Cleaning
Ensure the charger is unplugged from the power source before cleaning. Wipe the charging plug, cable, and control box with a dry and clean cloth. Do not use abrasive cleaners, solvents, or immerse any part of the charger in water.
4.2 Cable Care
Regularly inspect the charging cable for any signs of damage, fraying, cuts, or kinks. Do not step on, pull, bend, or knot the charging cable. Store the cable neatly when not in use to prevent damage.
4.3 Storage
When not in use, store the charger in its provided carrying bag in a dry place, away from direct sunlight and extreme temperatures. The storage temperature range is -40°C to +80°C.
5. Troubleshooting
This section provides solutions to common issues you might encounter. For persistent problems, contact customer support.
| Fault Name | Reason for Failure | Recommendations |
|---|---|---|
| Over Voltage | AC input voltage is too high |
|
| Under Voltage | AC input voltage is too low |
|
| Over Current | AC input current is too high |
|
| Over TEMP | Charger internal temperature greater than 85°C |
|
| Elec leakage | Leakage is greater than specified values (TypeA: (60Hz)AC20mA/(50Hz)AC30mA) |
|
| Leakage self check | The sensor for detecting leakage is abnormal |
|
| PE Fault | Poor grounding or incorrect wiring |
|
| Err:cp | Charging plug CC/CP connection abnormality |
|
6. Specifications
6.1 General
- Brand: feyree
- Model: Portable EV Charger 7KW 32A
- Charger Type: Portable Charger
- Origin: Mainland China
6.2 Electrical
- Power (W): 7KW
- Current: 32A (Adjustable: 8A-10A-13A-16A-20A-25A-32A)
- Voltage: 85V-264V
- Numbers of Phase: Single phase
- Input Frequency: 50Hz/60Hz
- Leakage Protection: AC30mA
6.3 Environmental
- Operating Temperature: -30°C ~ +55°C
- Storage Temperature: -40°C ~ +80°C
- Working Humidity: 5%~95% non-condensation
6.4 Physical
- IP Rating: IP65 (Charger Plug), IP66 (Charger Box)
- Cable Length: 3.5m / 5m
- Material: Copper alloy, silver plating
- Control Box Dimensions (L x W x H): 227mm x 100mm x 56.5mm
- Weight: 2.7kg
Note: The device cannot adjust the current during charging.
6.5 EV Connector Types
This charger is available with different EV connector types:
- Type1 (SAE J1772): Common in North America and Japan.
- Type2 (IEC62196-2): Standard in Europe and many other regions.
7. User Tips
- Grounding is Essential: Always ensure your outlet is properly grounded. The charger requires a grounded connection to operate safely and correctly.
- Adjust Current Before Connecting: Set your desired charging current (e.g., 16A if your car doesn't accept 32A) using button "A" on the control box *before* plugging into your vehicle.
- Check Compatibility: Verify your vehicle's charging port type (Type1/J1772 or Type2/IEC62196-2) to ensure you have the correct charger variant.
- Temperature Monitoring: The charger has built-in temperature control. If the internal temperature exceeds 85°C, it will cut off power within 0.2 seconds. If it exceeds 70°C, it will automatically reduce current. Ensure adequate ventilation around the charger.
- Last Setting Memory: The charger typically remembers the last current setting used, even after being unplugged and re-plugged.
- PDF User Manual: For a detailed PDF version of this manual, you can refer to the official document: Feyree Portable EV Charger User Manual (PDF).
8. Warranty and Support
8.1 Two-Year Warranty
Feyree offers a two-year warranty to customers who purchase original feyree products. This warranty covers defects in materials and workmanship under normal use.
8.2 Lifetime Technical Support
In case of any product-related issues, we encourage you to reach out to us, providing pictures and videos for further assistance. Our team is dedicated to providing lifetime technical support.
8.3 Exclusions
The warranty does not cover:
- Any product damage resulting from failure to follow the recommended guidelines.
- Damage caused by unauthorized disassembly of the machine or seeking maintenance from a non-designated service center.
- Purchases of non-original feyree products.
- Any modifications or do-it-yourself alterations carried out without guidance from a licensed electrician.
8.4 Customer Service Team
For support, inquiries, or warranty claims, please contact us:
E-mail: tina@feyree.com