SHANGDELI Power Window Control Switch

Contents

SHANGDELI Power Window Control Switch User Manual

For Ford Focus Mk2 & S-MAX (2005-2008)

1. Product Overview

This manual provides instructions for the SHANGDELI Power Window Control Switch, designed as a replacement window lifter switch button for compatible Ford Focus Mk2 and S-MAX models.

Product Identification

  • Product Name: Car Switch
  • Batch/Serial Number: Button Switch
  • Manufacturer: Guangzhou Shangdeli Electronic Commerce Co., Ltd
  • Manufacturer Address: Room 401, No. 105, Qixinggang Industrial Road, Luogang, Baiyun District, Guangzhou City, Guangdong Province, China
  • Manufacturer Contact: 1819472786@qq.com
  • EU Authorized Representative: PROCONSEIL FR, 8 bis rue Abel 75012 Paris, France
  • EU Representative Contact: Tel: 33-0780843245, Email: SophieDupont@proconseilfr.com

Compliance Information

  • CE Marking: This product complies with EU safety standards (LVD - Low Voltage Directive, EMC - Electromagnetic Compatibility Directive, RoHS - Restriction of Hazardous Substances Directive).
  • RoHS Compliance: The product is free of lead, mercury, cadmium, hexavalent chromium, and other hazardous substances, meeting environmental protection standards.
Front view of the SHANGDELI Power Window Control Switch
Figure 1: Front view of the Power Window Control Switch.

2. Safety Instructions (WARNING!)

Please read and understand all safety instructions before installation and use to prevent injury or damage to the product.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use (e.g., controlling vehicle windows).
  • Inspect the product before each use; do not use if damaged.
  • Follow all installation and operation guidelines provided in this manual to avoid injury.

3. Setup and Installation

This section outlines the steps for replacing your vehicle's power window control switch.

  1. Prepare for Installation:
    Disconnect the negative battery terminal before working on the switch to prevent short circuits. Use a screwdriver to unclip any surrounding handles or trim pieces if necessary.
  2. Remove the Faulty Switch:
    Carefully lift the faulty switch out of its harness. If you prefer not to remove the entire door casing or door handle, gently slide a flat-head screwdriver under the switch bezel and pry it until it loosens, allowing access to the housing.
  3. Disconnect and Detach:
    Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from its mounting outlet. Remove any existing rocker buttons from the old switch if they are to be reused.
  4. Install the New Switch:
    Before inserting the new switch, ensure it matches the old one, especially the pin configuration. Assemble the rocker buttons (if separate) into the new switch. Insert the new switch into the harness holes, ensuring a secure connection.
  5. Secure the Switch:
    Snap the new switch assembly firmly into the bezel until it clicks into place.
  6. Final Steps:
    Reconnect the negative battery terminal. Test the new window switch to ensure proper operation (up and down movement).
Rear view of the switch showing dimensions and 4-pin connector
Figure 2: Rear view with dimensions and 4-pin connector for installation reference.
Comparison of old and new window switches
Figure 3: Example of comparing an old switch (left) with a new replacement (right) for compatibility.

4. Operating Instructions

The power window control switch operates intuitively:

  • To lower the window: Press the bottom part of the rocker switch (indicated by the downward arrow).
  • To raise the window: Press the top part of the rocker switch (indicated by the upward arrow).

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the switch. Avoid using abrasive cleaners or solvents, as these can damage the plastic.
  • Liquid Exposure: Prevent liquids from entering the switch mechanism, as this can cause electrical malfunction.
  • Inspection: Periodically check the switch for any signs of wear, damage, or loose connections.

6. Troubleshooting

Switch Not Responding

  • Check Battery Connection: Ensure the vehicle's battery terminals are securely connected and the battery is charged.
  • Check Wiring: Verify that the switch is properly connected to the vehicle's wire harness. Ensure all pins are seated correctly.
  • Inspect for Damage: If the switch was recently installed, check for any visible damage to the switch or its wiring.

Compatibility Issues

Some users have reported compatibility issues with specific vehicle variants. If the switch does not fit or function correctly after installation:

  • Verify Part Number: Double-check that the part number or specifications of this switch match your vehicle's original part.
  • Compare Pin Configuration: Ensure the number and arrangement of pins on the new switch exactly match your old switch. Differences in pin slot size or internal regulators can prevent proper fitment or function.
  • Vehicle Specifics: Be aware that regional vehicle models (e.g., Spanish Ford Focus MK2) or specific trim levels might have variations.

7. Specifications

FeatureDetail
Item TypeWindow Control Switch
Product TypeSwitches and accessories
OriginMainland China
Install PositionFront Right, Rear Left, Rear Right (depending on vehicle configuration)
Number of Pins4 pins
Approximate Dimensions (W x H x D)3.5 cm x 1.9 cm x 1.5 cm (connector depth)
Bottom view of the switch showing pin configuration
Figure 4: Bottom view of the switch, illustrating the 4-pin connector.

8. User Tips

  • Verify Compatibility: Before purchasing and installing, always compare your existing switch with the product images and specifications. Pay close attention to the pin configuration, dimensions, and any specific part numbers.
  • Check Vehicle Model and Year: Some users have reported fitment issues with specific Ford Focus MK2 models (e.g., 2006 Spanish version) due to variations in pin slot size or internal regulator types. Ensure this switch is explicitly compatible with your exact vehicle model, year, and region.
  • Pin Comparison: If possible, take a photo of your old switch's connector and compare it directly with the new switch's connector to ensure a perfect match.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or their authorized representative:

  • Manufacturer (Guangzhou Shangdeli Electronic Commerce Co., Ltd):
    Email: 1819472786@qq.com
  • EU Authorized Representative (PROCONSEIL FR):
    Email: SophieDupont@proconseilfr.com
    Tel: 33-0780843245

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.