XHDATA D-368 Portable AM/FM/SW 12 Bands Stereo Radio Receiver

1. Introduction

Thank you for purchasing the XHDATA D-368 Portable AM/FM/SW 12 Bands Stereo Radio Receiver. This device combines traditional radio reception with modern digital audio playback capabilities, including Bluetooth, USB, and TF card support. Its compact design and versatile features make it ideal for both indoor and outdoor use. Please read this manual carefully to ensure proper operation and to maximize your enjoyment of the product.

2. Safety Information

• Do not expose the device to rain, moisture, or extreme temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Do not disassemble or attempt to repair the device yourself. Refer to qualified service personnel.
• Keep the device away from strong magnetic fields.
• Use only the specified charging cable and power adapter (DC 5V 1000mA) to prevent damage.
• Dispose of batteries according to local regulations.

3. Package Contents

Ensure all items are present in the package:

• XHDATA D-368 Radio Receiver
• Rechargeable Battery (18650 type)
• Charging Cable (USB)
• User Manual (PDF referenced, content incorporated)

4. Product Overview

Familiarize yourself with the various parts and controls of your XHDATA D-368 radio:

1. Mode switch
2. Previous key (◀◀)
3. Play/pause key (►►)
4. Next key (▶▶)
5. DC 5V Input socket
6. Charging LED/Tuning LED
7. TF card socket
8. USB socket
9. Radio tuning button
10. Power/function switch (OFF•MP3/BT•RADIO)
11. Volume button
12. Radio band button (FM1/FM2/AM/SW)
13. Antenna
14. Stereo headphone jack
15. Stereo LED

5. Setup

5.1. Battery Installation

The XHDATA D-368 uses a rechargeable 18650 battery. Open the battery compartment cover on the back of the radio and insert the 18650 battery, ensuring correct polarity. Close the cover securely.

5.2. Charging the Battery

1. Plug the charging cable into the "DC 5V in" (5) charging port on the radio.
2. Connect the other end of the USB charging cable to a mobile phone adapter (DC 5V 1000mA) or a computer USB port.
3. The Charging LED (6) will illuminate during charging.
4. When the battery is fully charged, the Charging LED (6) will turn off.

Note: The radio can be used while charging. If using AC power directly without the battery, it is advisable to remove the battery, though it can function with the battery present.

6. Operating Instructions

6.1. Radio Function Operation

1. Turn the Power/Function Switch (10) to the "RADIO" position.
2. Adjust the Volume Button (11) to your desired listening level.
3. Push the Radio Band Button (12) to select your preferred band (FM1, FM2, AM, or SW).
4. For FM or SW bands, fully extend the Antenna (13) and adjust its angle for the best reception.
5. For AM band, rotate the entire radio body to optimize reception.
6. Slowly turn the Radio Tuning Button (9) to select a radio station. The Tuning LED (6) will indicate when a strong signal is found.

FM Stereo Operation

To enjoy FM stereo sound, plug stereo headphones into the Stereo Headphone Jack (14). When the Stereo LED (15) illuminates, you are receiving a stereo signal.

6.2. USB/TF MP3 Playing Function

1. Turn the Power/Function Switch (10) to the "MP3/BT" position.
2. Adjust the Volume Button (11) to your desired listening level.
3. Insert a USB drive into the USB Socket (8) or a TF card into the TF Card Socket (7). The radio will automatically begin playing MP3 files.
4. **Previous/Next Song:** Short press the Previous Key (2) or Next Key (4).
5. **Fast Reverse/Fast Forward:** Long press the Previous Key (2) or Next Key (4).
6. **Play/Pause:** Short press the Play/Pause Key (3) to pause playback. Press again to resume.
7. **Playback Mode (One/All):** Long press the Play/Pause Key (3) for 3 seconds. "ONE" will be displayed for single song repeat, and "ALL" for playing all songs.

6.3. Wireless Bluetooth Play Function

1. Turn the Power/Function Switch (10) to the "MP3/BT" position. If no USB or TF card is inserted, the radio will default to Bluetooth mode.
2. On your mobile phone or Bluetooth-enabled device, search for and connect to the device named "D-368".
3. Once connected, you can play audio from your device through the radio.
4. **Previous/Next Song:** Short press the Previous Key (2) or Next Key (4).
5. **Disconnect/Reconnect:** Long press the Play/Pause Key (3) for 3 seconds to forcibly disconnect the currently connected device. Press it again to restore the connection.

6.4. Product Demonstration Video

This video provides a visual demonstration of the radio's key features, including radio tuning, Bluetooth connectivity, and MP3 playback.

7. Maintenance

• Clean the radio with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the device dry. If it gets wet, wipe it immediately.
• When not in use for extended periods, remove the battery to prevent leakage.
• Store the radio in a cool, dry place away from direct sunlight.

8. Troubleshooting

9. Specifications

10. User Tips

• For audiobook listeners: To resume MP3 playback from a specific position, switch the Mode Switch (1) to Bluetooth mode and then turn off the receiver. The next time you turn it on, playback should continue from where you left off.
• The sound quality is generally good for its size, with decent bass.
• The battery charge indicator LED turns off when fully charged.
• USB drives should be formatted to FAT32 for optimal compatibility.
• While the radio can be powered via AC with the battery installed, some users prefer to remove the battery when using AC power for extended periods.

11. Warranty and Support

For product support, technical assistance, or warranty inquiries, please contact XHDATA customer service through the following channels:

• Email: xhdatacn@gmail.com
• Skype: radiwow
• Facebook: XHDATA
• Website: https://www.xhdata.com.cn
• Whatsapp: +86 18025193267

Please retain your proof of purchase for any warranty claims.