dawupine LED-500

Contents

Portable LED Work Light Instruction Manual

Model: LED-500 | Brand: dawupine

Important Safety Information

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

This device is intended for use by children 8 years of age and older and persons with reduced physical, sensory or mental capabilities, provided they have been supervised or instructed to use the device in a safe manner and understand the hazards involved. Children must not play with this device. Cleaning and user maintenance should not be performed by children without supervision.

General Safety Rules:

  • Do not expose to rain. Store indoors.
  • This device is not a toy. Close attention is required when used by or near children.
  • Use only as described in this manual. Use only accessories recommended by the manufacturer.
  • Do not use damaged batteries. If the device is not working properly due to drops, damage, exposure to elements, or water immersion, seek professional repair.
  • Do not operate this product with wet hands.
  • Do not insert anything into the opening.
  • Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
  • Turn off all controls before removing the battery.
  • Do not use near open flames, hot embers, or in explosive atmospheres (flammable substances, liquids, gases, dust). Cordless fans can create sparks that may ignite dust or fumes.
  • Do not use if there are broken, bent, cracked, or damaged parts. Any device showing damage or malfunction should not be used.
  • Do not leave the device powered on and unattended.

Battery Safety:

  • Always turn off the device before installing or removing the battery.
  • When installing or removing the battery, hold the device and the battery firmly. Failure to do so can cause them to slip out, resulting in damage or injury.
  • Fully install the battery. Otherwise, it could accidentally fall out, causing injury.
  • To remove the battery, slide it out while pressing the release button.
  • To install the battery, align the tabs on the battery with the grooves in the housing and slide it into place until it locks with a click. Do not use force. If it does not slide in easily, it is not inserted correctly.
  • The product does not include batteries.

Setup

Battery Installation and Removal

  1. Ensure the work light is turned off.
  2. To Install: Align the battery (Makita 14.4V/18V Li-ion or Bosch 14.4V/18V Li-ion) with the battery slot on the base of the work light. Slide the battery firmly into place until you hear a click, indicating it is securely locked.
  3. To Remove: Press the battery release button (if present) and slide the battery out of the slot.

Important Battery Compatibility:

  • Compatible with Makita 14.4V/18V Li-ion batteries (e.g., BL1430, BL1830).
  • Compatible with Bosch 14.4V/18V Li-ion batteries (e.g., BAT614, BAT618).
  • NOT compatible with Makita G series lithium batteries (e.g., BL1415G, BL1815G).
  • NOT compatible with Bosch "ALL 18V" series Li-ion batteries.
Incompatible Makita G series batteries

Figure 1: Incompatible Makita G series batteries (BL1415G, BL1815G) marked with a red cross.

Incompatible Bosch ALL 18V series batteries

Figure 2: Incompatible Bosch "ALL 18V" series batteries marked with orange crosses.

Operating Instructions

Powering On/Off and Lighting Modes

  1. To Turn On: Press the red power button once for half-bright mode.
  2. To Cycle Modes: Press the button again for full-bright mode. Press it a third time for alert (flashing) mode.
  3. To Turn Off: Long press the red power button in any mode.

Video 1: Product demonstration showing lighting modes, rotation, and USB charging.

Adjusting the Lamp Head

The LED lamp head can be rotated 90 degrees to freely adjust the illumination angle, providing versatile lighting options.

90 degree rotation of LED lamp head

Figure 3: Diagram illustrating the 90-degree rotation capability of the lamp head.

Adjustable lamp holder

Figure 4: Image showing the lamp holder's adjustable angle.

USB Charging Function

The work light features a USB output port (5V 2.1A) located at the rear. With a compatible Li-ion battery installed, you can use this port to charge your mobile phone or other USB-powered devices.

USB output charging a mobile phone

Figure 5: The work light charging a mobile phone via its USB output port.

Using the Lifting Rope

The tail of the work light is equipped with a lifting rope. This allows the light to be hung, functioning as a pendant light for hands-free illumination.

Maintenance

  • Cleaning: Ensure the device is off and the battery is removed. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Storage: Store the work light indoors in a safe, dry place away from direct sunlight, moisture, and extreme temperatures. Keep this instruction manual in a safe place for future reference.
  • Battery Care: Follow the manufacturer's instructions for battery charging and storage. Remove the battery if the device will not be used for an extended period.

Troubleshooting

  • Light does not turn on:
    • Ensure the battery is fully charged and correctly installed.
    • Check for any visible damage to the battery or the work light's contacts.
  • USB charging not working:
    • Verify the battery is sufficiently charged.
    • Ensure the USB cable is properly connected to both the work light and the device being charged.
    • Try a different USB cable or device to rule out cable/device issues.
  • Device appears damaged or malfunctioning:
    • Do not attempt to repair the device yourself. Discontinue use immediately.
    • Contact customer support for assistance.

Specifications

Branddawupine
Model NumberLED-500
Item TypeSpotlight
Light SourceLED bulbs (Chip/White)
Bulbs IncludedNo
DimmableYes (3 modes)
Power SourceRechargeable battery (14.4V/18V Li-ion, not included)
USB Output5V 2.1A
Brightness280lm
Light Range1000 - 1500 m
LED Power Dissipation3W
FeaturesPortable, 90° rotating head
CertificationCE
OriginMainland China
Dimensions (approx.)20 cm x 12 cm x 7.5 cm
Weight (approx.)0.35 kg (without battery)

User Tips

No specific user tips are available from provided customer reviews or Q&A content for this product.

Warranty and Support

For any questions, technical support, or warranty inquiries, please contact the seller directly through your purchase platform. Please have your order details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.