1. Product Overview
The Uxcell U Shaped Connector Bracket is a versatile fastening component made from 304 stainless steel, designed for various metalworking and DIY applications. It is commonly used as a door closed bar holder or for connecting strut channels.
This package includes 8 pieces of the U shaped connector brackets.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Small parts - keep away from children.
- Do not overload the bracket beyond its intended capacity.
- Keep the brackets dry to maintain their integrity and prevent potential issues, although 304 stainless steel is highly corrosion-resistant.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | UXCELL |
| Material | 304 Stainless Steel |
| DIY Supplies | Metalworking |
| Is Customized | No |
| Origin | Mainland China |
| Certification | NONE |
| Package Quantity | 8 Pieces |
| Package Weight | 0.392 kg |
| Processing Time | 5 days |
Dimensions:
- Overall Length: 95mm / 3.74"
- Length between mounting holes: 78mm / 3.07"
- Height: 48mm / 1.89"
- Width (internal): 52mm / 2.05"
- Top Width: 20mm / 0.79"
- Mounting Hole Diameter: Ø8mm / 0.31"
4. Setup
- Prepare Mounting Surface: Ensure the surface where the bracket will be installed is clean, dry, and structurally sound to support the intended load.
- Align Bracket: Position the U shaped connector bracket at the desired mounting location. Use a marker to mark the positions for drilling if necessary.
- Drill Holes (if required): If the mounting surface does not have pre-existing holes, drill holes appropriate for the Ø8mm mounting holes of the bracket and your chosen fasteners.
- Secure Bracket: Use suitable fasteners (e.g., screws, bolts, nuts, washers - not included) to firmly attach the bracket to the mounting surface.
- Ensure Stable Connection: Double-check that the bracket is securely fastened and does not wobble or move. A stable connection is crucial for safety and performance.
5. Operating Instructions
Once properly installed, the U Shaped Connector Bracket functions as a fixed support or connector. Its operation is passive, providing structural support for the components it holds or connects.
- Ensure that any components placed within or attached to the bracket fit snugly and are also securely fastened to prevent movement.
- Do not exceed the load-bearing capacity of the bracket or the fasteners used.
6. Maintenance
- Keep Dry: While 304 stainless steel is corrosion-resistant, keeping the brackets dry will help maintain their appearance and prevent accumulation of dirt or debris.
- Cleaning: If cleaning is necessary, wipe the brackets with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could scratch the surface or compromise the material.
- Regular Inspection: Periodically inspect the brackets and their fasteners for any signs of loosening, wear, damage, or corrosion. Tighten any loose fasteners immediately.
- Environmental Considerations: If used in harsh environments (e.g., marine, chemical), more frequent inspection and cleaning may be required.
7. Troubleshooting
- Bracket is Loose: This is typically due to improperly tightened fasteners or an unsuitable mounting surface. Re-tighten all fasteners. If the problem persists, consider using larger fasteners or reinforcing the mounting surface.
- Bracket Shows Signs of Wear/Damage: If the bracket is bent, cracked, or severely corroded, it may be overloaded or exposed to conditions beyond its design. Replace the damaged bracket immediately to prevent failure.
- Corrosion/Rust Spots: Although 304 stainless steel is highly resistant, surface rust can occur if exposed to certain chemicals or iron particles. Clean with a stainless steel cleaner and ensure the environment is suitable for the material.
8. User Tips
- Always select fasteners that are appropriate for both the bracket's mounting holes and the material of your mounting surface.
- When installing multiple brackets, use a level and measuring tape to ensure consistent alignment for a professional finish and even load distribution.
- Consider the total weight of the items the bracket will support and choose fasteners and a mounting location that can safely bear that load.
9. Warranty & Support
For product inquiries, technical support, or warranty information, please contact the manufacturer or their authorized representative:
Manufacturer Information:
- Company: Guangzhou Dajiali Network Technology Co., Ltd.
- Address: B395, Room 106, Rulin Street, Tianhe, Guangzhou, China
- Email: udb7910@126.com
EU Authorized Representative:
- Company: SUCCESS COURIER SL
- Address: CALLE RIO TORMESNUM.1, PLANTAI, DERECHAOFICINA 3Fuenlabrada, Madrid, 28947 Spain
- Email: successservice2@hotmail.com
A PDF version of this user manual is also available for download from the product page or by contacting support.