tedeligo Single Fire Light Switch+Rf Wireless Wall Switch

Contents

TEDELIGO 433MHz Wireless Light Switch User Manual

Model: Single Fire Light Switch+Rf Wireless Wall Switch

1. Product Overview

The TEDELIGO 433MHz Wireless Light Switch is designed for convenient control of home electrical lamps. It features a no-neutral wiring requirement for the receiver module and supports both RF wireless and traditional wall switch control methods, including 2-way control configurations.

TEDELIGO 433MHz Wireless Light Switch components

Figure 1: Overview of the Smart Switch Receiver and Wireless Wall Switches.

2. Package Contents

  • Smart Switch Receiver Module
  • Wireless Wall Switch(es) (quantity varies by model)
  • Screws for installation
  • Double-sided tape for wall switch mounting
  • Base for wall switch mounting
Included accessories and dimensions

Figure 2: Included accessories and dimensional information for the receiver and wall switch.

3. Setup and Installation

3.1 Safety Precautions

  • Ensure power is OFF at the circuit breaker before installation.
  • Installation should be performed by a qualified electrician if you are unsure.
  • Do not exceed the maximum load of 100W for the receiver.

3.2 Receiver Wiring (Single Fire Line)

The receiver module is designed for single fire line wiring, meaning it does not require a neutral wire. Connect the Fire line (Live) and Light line to the designated terminals as shown in the diagram below. The maximum load for the receiver is 100W.

Single Fire Line Wiring Diagram

Figure 3: Wiring diagram for the receiver module with a single fire line connection. Connect 'L IN' to the live wire and 'L OUT' to the light bulb.

3.3 Wall Switch Installation

The wireless wall switch can be mounted using the provided screws or double-sided tape. It operates wirelessly and does not require direct electrical wiring.

4. Operating Instructions

4.1 Pairing the Wireless Wall Switch with the Receiver

To establish communication between the wireless wall switch and the receiver module:

  1. Press the learning button on the receiver module twice.
  2. Wait for 3 seconds.
  3. Press any button on the wireless wall switch.
  4. Wait for 3 seconds. The pairing is successful when the light responds.
Pairing instructions for receiver and wall switch

Figure 4: Visual guide for pairing the receiver with the wireless wall switch.

4.2 Clearing Paired Signals

To clear all paired signals from the receiver module:

  1. Press the learning button on the receiver module 8 times.
  2. Wait for 3 seconds. All previously paired data will be cleared.

After clearing, you will need to re-pair any desired wall switches.

4.3 Control Methods

The system supports both RF wireless control via the provided wall switches and traditional wired control if a standard switch is also connected to the circuit.

Two control methods: RF Wireless and Traditional

Figure 5: Illustration of the two control methods available for the light switch system.

4.4 Multi-Way Control

The system supports multi-way control configurations:

  • **Sub Switch Control**: Multiple wireless wall switches can control different receiver modules independently.
  • **Master Switch Control**: A single wireless wall switch can be paired to control multiple receiver modules simultaneously.
Multi-control setup examples

Figure 6: Examples of multi-control setups, including controlling multiple lights with one switch or one light with multiple switches.

5. Maintenance

5.1 Wall Switch Battery Replacement

The wireless wall switch is powered by a CR2032 battery. The design includes a battery bay for easy replacement. When the switch's response becomes inconsistent or stops working, it may be time to replace the battery.

6. Troubleshooting

  • Light not responding to switch: Ensure the receiver is correctly wired and receiving power. Check the battery in the wireless wall switch. Try re-pairing the switch with the receiver (refer to Section 4.1).
  • Intermittent control: Check for potential sources of 433MHz interference in the vicinity. Ensure the wall switch is within the effective range (up to 50m in open areas).
  • Receiver not working: Verify the input voltage (AC 85~250V) and ensure the load does not exceed 100W. Check all wiring connections.

7. Specifications

FeatureSpecification
Brand Nametedeligo
Model NumberSingle Fire Light Switch+Rf Wireless Wall Switch
Item TypeSWITCHES
Switch TypeRemote Control
MaterialPlastic
FeaturesWithout neutral, Multi control, Wireless remote control
Is Smart DeviceNo
OriginMainland China
CertificationRoHS, CQC, CE
Application ScenarioLed Light Lamp Switch, Home Security Alarm System
Receiver Working VoltageAC 85~250 V 50/60 Hz
Max LoadMax 100 W
RF Frequency433MHz
Receiving DistanceUp to 50m (theoretical distance)
Code1527 learning or 2262 fixed
Working Temperature-30~+80 Celsius
Receiver Size46*40*20mm
Receiver ShellYES
Modulation ModeASK superheterodyne wireless reception
Wall Switch Battery1pcs CR2032 battery (not included, but easy to change)
Wall Switch Size3.39*3.39*0.51 in (86*86*13mm)
Wall Switch Button1/2/3 (varies by model)

8. User Tips

  • For optimal wireless performance, try to install the receiver and wall switch without major metal obstructions between them.
  • When installing the receiver in a junction box, ensure there is adequate space for proper ventilation and to avoid overheating.
  • Consider the 'Master Switch Control' feature for areas where you want to turn off multiple lights (e.g., all lights in a living room) with a single press.
  • The 'Sub Switch Control' is useful for adding extra control points to an existing light without running new wires.

9. Warranty and Support

This product comes with a 1-year warranty for the Single Fire Light Switch with RF Wall Switch.

For further detailed instructions and documentation, you may refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.