UNI-T Laser Level User Manual

1. Introduction

Thank you for purchasing a UNI-T Laser Level. This manual provides essential information for the safe and correct operation of your device. Please read it thoroughly before use and keep it in an easily accessible place for future reference.

The UNI-T Laser Level is a versatile tool designed for various leveling tasks, offering high precision and multiple line configurations (12 or 16 lines, 3D 360° coverage) with a bright green laser beam. It features self-leveling capabilities, a manual mode for angled projections, and remote control functionality for enhanced convenience.

2. Safety Guidelines

Warning!

• This is a Class 2 laser product.
• Maximum output power: 30mW (for LM576LD/LM585LD/LM573LD-II) or ≤1mW (for LM575LD).
• Wavelength: 520±5nm (for LM576LD/LM585LD/LM573LD-II) or 500nm-540nm (for LM575LD).

Laser Radiation Precautions:

• Do not stare into the laser beam.
• Do not directly expose your eyes to the laser beam.
• Avoid using optical instruments (e.g., binoculars, telescopes) to view the laser beam, as this can intensify the beam and cause eye damage.
• Do not point the laser to eyes.
• Exposure to Class 2 lasers for no more than 2 seconds is generally considered safe due to natural eyelid reflexes (blinking) providing adequate protection. However, direct exposure should always be avoided.

General Cautions:

• Do not disassemble the laser instrument without authorization.
• Do not refit or modify the instrument in any way, as this may cause harmful laser radiation exposure and invalidate the warranty.
• Do not use the laser instrument around children or allow them to use it.
• Some product kits include glasses. These are not safety glasses; they are only intended to help users recognize the laser beam in strong ambient light or when the laser source is distant. They do not protect against direct laser exposure.

3. Package Contents

The package typically includes the following items:

• Laser Level: 1 pc
• 5200mAh Lithium Battery: 1 pc
• User Manual: 1 pc
• LM312 Bracket: 1 pc (with 6 months warranty)
• Charger: 1 pc
• Remote Control: 1 pc
• Toolbox: 1 pc
• Type-C Charging Cable: 1 pc (for models with Type-C interface)
• Tripod Mount: 1 pc (for LM585LD)
• Lifting Platform: 1 pc (for LM585LD)
• Adaptor: 1 pc (for LM585LD)
• Blow-molding box: 1 pc (for LM585LD)

4. Product Overview

Familiarize yourself with the components of your UNI-T Laser Level:

Component Identification (LM576LD/LM575LD):

1. Button
2. LED indicator
3. Horizontal window H1
4. Vertical window V1
5. Battery door
6. Type-C charging interface
7. Pendulum lock
8. Horizontal window H2
9. Vertical window V2

Component Identification (LM585LD):

1. 360° horizontal glass window
2. Vertical glass window (V1)
3. Vertical glass window (V2)
4. Vertical glass window (V3)
5. Vertical glass window (V4)
6. Protection lock
7. ON/OFF button
8. Battery pack
9. Charging port

5. Setup

Battery Installation:

To install the lithium battery pack:

1. Locate the battery compartment, usually at the back or bottom of the device.
2. Open the battery door (item 5 in LM576LD/LM575LD diagram, item 8 in LM585LD diagram).
3. Insert the 5200mAh lithium battery pack, ensuring correct polarity.
4. Close the battery door securely.

The device can be charged via the Type-C charging interface (item 6 in LM576LD/LM575LD diagram, item 9 in LM585LD diagram).

6. Operation

Self-Leveling Mode:

1. Ensure the laser instrument is in the locked state.
2. Toggle the pendulum lock (item 7 in LM576LD/LM575LD diagram, item 6 in LM585LD diagram) to the unlocked position. This initiates self-inspection.
3. After self-inspection, the horizontal laser line will be continuously on, and the instrument will be in self-leveling mode.
4. If the instrument is within its self-leveling range of ±(3±1)°, it will automatically level.
5. If the tilt angle exceeds the self-leveling range, the laser line will flash quickly, and a beeping sound will be emitted.

Line Selection:

• Press the 'H' button to turn on/off the horizontal laser line.
• Press the 'V' button to turn on/off the vertical laser line.
• Horizontal and vertical laser lines can be used independently or simultaneously.
• For LM573LD-II, continuously press the 'V' button to cycle through operating modes: 1# vertical plane, 2# vertical plane, two vertical planes simultaneously. Press 'H' to switch to horizontal plane or generate a horizontal plane.

Manual Mode (Slash Function):

1. In the shutdown state, press and hold the 'V' button for more than 3 seconds to enter manual mode. The instrument will turn on and emit a horizontal laser line.
2. The lock indicator will remain on, and the laser line will flash once every five seconds to indicate manual mode.
3. In manual mode, the laser line can be set at different angles (e.g., 180° slash function with a tripod).
4. To exit manual mode, press and hold the 'V' button again for more than 3 seconds, or toggle the pendulum lock to enter self-leveling mode and then toggle it again to shut down.
5. Note: The laser line in manual mode cannot be used as a horizontal/vertical reference line for precise leveling.

Pulse Mode (Outdoor Mode):

1. In self-leveling mode, long press the 'V' button to enter outdoor pulse mode. The pulse indicator will be on, and the laser line brightness will decrease.
2. In this mode, the instrument can work with a dedicated laser receiver (not included).
3. Long press the 'V' button again to exit pulse mode.
4. For LM585LD, when the instrument is ON, short press the manual/pulse button to enter pulse mode. The brightness of the laser beam will decrease and the pulse indicator light will turn blue. Short press again to exit.

Remote Control Mode:

This product is equipped with a remote control for switching functions.

1. Pairing: For first-time use, turn on the instrument, then press and hold the 'H' button on both the instrument and the remote control simultaneously for more than 3 seconds to pair successfully.
2. Usage: The remote control can only switch functions (e.g., horizontal/vertical lines) and cannot remotely turn on/off the instrument or control pulse mode.
3. Note: The remote control function is only active after the instrument has been turned on.

Power Off:

In the power-on state, toggle the pendulum lock to the locked position again to turn off the instrument.

Note: Always toggle the pendulum lock to the locked position before shutting down the instrument to protect the pendulum mechanism.

Charging and Power Indicators:

• When the instrument is in use, the charging/power indicator is off.
• When battery power is 20% or less, the indicator will flash red, and the instrument will automatically shut down when fully discharged.
• While charging, the indicator will flash red.
• When fully charged, the indicator will switch to a steady green light.
• If charging directly via the instrument's charging interface, the green light will flash during charging and become steady green when fully charged.

7. Maintenance

• When not in use, turn off the instrument and slide the lock switch to the locked position.
• Do not short-circuit the battery contacts or expose batteries to fire.
• Avoid storing batteries in high-temperature environments or direct sunlight.
• Clean the exterior plastic parts with a damp cloth. Do not use solvents.
• Wipe the instrument with a dry and soft cloth before storage.
• Store the instrument in its soft case or plastic box when not in use.
• Do not dispose of the instrument near household waste. Dispose of the lithium battery pack and discarded instruments according to WEEE directives or relevant local regulations.

8. Troubleshooting

This section addresses common issues you might encounter:

• Laser Line Flashing and Beeping: This indicates the instrument is outside its self-leveling range (±(3±1)°). Adjust the instrument's position until it is on a more level surface.
• No Laser Line: Check if the pendulum lock is in the unlocked position for self-leveling mode. Ensure the battery is charged and properly installed. If in manual mode, ensure it was activated correctly.
• Remote Control Not Working: Ensure the instrument is turned on. Re-pair the remote control by pressing and holding the 'H' button on both the instrument and remote for 3 seconds.
• Dim Laser Line in Pulse Mode: This is normal behavior for pulse mode, designed for use with a laser receiver.
• Charging Indicator Flashing Red: The battery is low or currently charging. It will turn steady green when fully charged.

9. Specifications

10. Warranty and Support

Limited Warranty and Liability:

UNI-Trend guarantees that the product is free from any defect in material and workmanship within one year from the purchase date. This warranty does not apply to damages caused by accident, negligence, misuse, modification, contamination, or improper handling. The dealer is not authorized to give any other warranty on behalf of UNI-Trend.

If you require warranty service within the warranty period, please contact your seller directly.

UNI-Trend will not be responsible for any special, indirect, incidental, or subsequent damage or loss caused by using this device.

Manufacturer Information:

11. User Tips

• Versatile Tool: This laser level is suitable for a wide range of tasks, from basic leveling to complex 3D layouts, thanks to its 12 or 16 line configurations and 360° self-leveling capabilities.
• Precision for Professionals: The professional 360 self-leveling feature ensures high accuracy for both vertical and horizontal applications.
• Optimal Visibility: The green laser beam offers excellent visibility, especially in indoor conditions. For outdoor use or very bright environments, consider using the pulse mode with a compatible laser receiver.
• Protect the Pendulum: Always engage the pendulum lock when transporting the device or when it's not in use to prevent damage to the internal leveling mechanism.

12. Frequently Asked Questions (FAQ)

Q: Under which category does this product fall?

A: This product falls under the category of laser levels, specifically for measurement and analysis instruments.

Q: What are its distinctive features?

A: It features a 12 or 16 lines measurement model, professional 360° self-leveling, and supports both vertical and horizontal laser projections.