Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Malcayang LED Dynamic Turn Signal Lights. These lights are designed to enhance vehicle signaling with a modern dynamic sequential amber light, improving visibility and safety. Please read this manual thoroughly before installation and use to ensure proper function and to avoid damage or injury.
Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
Note: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
Package Contents
The package includes:
- One pair of Malcayang LED Dynamic Turn Signal Lights (left and right).
- Integrated wiring with OE connectors.
Image: A pair of dynamic LED turn signal lights, showing the amber sequential illumination and connected wiring.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | Malcayang |
| Item Type | Turn Signal |
| Interface Type | T10 (W5W/194) |
| Voltage | 12 V |
| Lumens | 2400LM |
| Item Weight | 0.12kg |
| Model Name (Part Numbers) | 14805294, 1J5949117, 1J0949117, 1125197, 1108914, 4M5A13K309AA |
| Origin | Mainland China |
| Lens Color | Glossy Black |
| Dimensions (approx.) | 79mm (Length) x 35mm (Width) |
Image: Diagram showing the approximate dimensions of the turn signal light (79mm x 35mm).
Compatible Vehicle Models
These LED Dynamic Turn Signal Lights are compatible with a wide range of vehicles. Please verify your vehicle's specific model and year for compatibility before installation.
For Volkswagen:
- Bora: 1998.10-2005.05
- Golf3: 1995.09-1999.04
- Golf4: 1997.08-2005.06
- Lupo: 1998.09-2005.07
- Passat 3B: 1996.10-2000.11
- Passat 3BG: 2000.10-2003.10
- Polo 6N: 1994.10-199.10
- Polo 6N2: 1999.10-2001.09
- Polo 9N: 2001.10-2005.10
- Vento: 1995.09-1998.09
- Sharan: 1995.09-2000.04
- Also generally compatible with Up, Caddy, T5, Amarok, Fox, and some Beetle models (verify specific years).
For SEAT:
- Ibiza 6L: 2002-2008
- Cordoba: 1993-1999
- Toledo 1M: 1996-2006
- Leon 1M: 1996-2006
For Skoda:
- Octavia 1U: 1996-2010
For Ford:
- C-Max: 2007.02~
- Fiesta: 2001.11~
- Focus MK2: 2004.11~2007.03
- Fusion: 2002.08~
- Galaxy: 1995.03~2000.04
Setup & Installation
Installation is designed to be straightforward, replacing your original signal lights. Follow these steps:
- Remove Original Parts: Carefully remove the original car parts to access the internal screws or clips holding the existing signal light in place.
- Loosen and Remove: Loosen the screws/clips and gently remove the cover/cap and the OEM signal light.
- Disconnect Original Bulb: Take off the OE halogen bulb from its connector.
- Connect New Light: Insert the connector of the new Malcayang LED Dynamic Turn Signal Light into the OE socket.
- Secure New Light: Put the OE socket back into the light housing to prevent water ingress.
- Reassemble: Secure the new LED dynamic turn signal light in place and reassemble any removed car parts.
Image: Installation diagram showing the process of replacing an OE halogen bulb with the new LED dynamic turn signal light.
For a visual demonstration of the dynamic turn signal function, please watch the video below:
Video: Demonstration of the dynamic sequential amber light effect of the turn signal lights.
Operating Instructions
Once installed, the Malcayang LED Dynamic Turn Signal Lights operate automatically with your vehicle's turn signal system. When the turn signal is activated, the LEDs will illuminate in a sequential, dynamic pattern, flowing from the inside out, providing a modern and highly visible indication of your turning intentions.
Maintenance
- Cleaning: Clean the lens with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the lights for any signs of damage, loose connections, or moisture ingress.
- Replacement: LED lights have a long lifespan. If a light fails, the entire unit should be replaced.
Troubleshooting
- Light Not Functioning:
- Check the connection to the OE socket to ensure it is secure.
- Verify that the vehicle's turn signal system is working correctly (check other turn signals).
- Inspect the wiring for any visible damage.
- Poor Fitment:
- Ensure all original mounting points are clear of debris.
- Some vehicle models may require minor adjustments or trimming of plastic lugs for a perfect fit. Proceed with caution if modifications are needed.
- Fragile Components:
- Handle the lights with care during installation, as some components (e.g., pressure hitches) have been reported to be fragile.
- No CAN bus compatibility: These lights do not include CAN bus functionality. If your vehicle requires CAN bus compatible lights to prevent error messages, additional resistors may be needed (not included).
User Tips
- Check Fitment Carefully: While designed for direct replacement, some users have found minor trimming of plastic lugs on the light itself can improve fitment on certain models. Test fit before fully securing.
- Gentle Installation: Be gentle when installing, especially with the mounting clips, as they can be fragile.
- Verify Compatibility: Double-check the compatibility list for your specific vehicle model and year. Note that while the product title mentions 'Beetle', specific model years for Beetle are not detailed in the provided compatibility list, so extra verification is advised.
- Dynamic Effect: The dynamic sequential lighting is a key feature, providing enhanced visibility.
Compliance Information
This product is manufactured in Mainland China by Guangzhou yangchi auto parts co.LTD. It is represented in the EU by CET PRODUCT SERVICE LTD. The product is marked with E8, indicating compliance with certain European regulations.
EU Authorized Representative:
CET PRODUCT SERVICE LTDOsterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: +4971416432236
Manufacturer:
Guangzhou yangchi auto parts co.LTDCN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
E-Mail: ouyan99@dingtalk.com
Telephone: 18102513142
For further details, the official user manual (PDF) is available for download: User Manual (PDF)