KPSUN staircase light

Contents

KPSUN Square Aluminum LED Stair Light User Manual

Model: staircase light

1. Product Overview

The KPSUN Square Aluminum LED Stair Light is designed for indoor use, providing subtle and effective illumination for staircases, corridors, hallways, and other interior spaces. Its recessed design offers a sleek, integrated look.

Video: Demonstrating the KPSUN LED Stair Light, showing its physical appearance, light output, and application in various indoor settings like hallways and staircases.

KPSUN LED Stair Light in Black, Silver, White, and installed in a hallway

Image: KPSUN LED Stair Light available in Black, Silver, and White finishes, shown installed in a modern hallway.

2. Setup and Installation

Important: Installation should be performed by a qualified electrician to ensure safety and proper functionality. Always turn off power at the circuit breaker before beginning any electrical work.

Dimensions diagram for the KPSUN LED Stair Light and its junction box

Image: Dimensions of the KPSUN LED Stair Light. Light fitting: 90mm (W) x 90mm (H). Junction box: 80mm (H) x 70mm (D) x 50mm (W).

Installation Instructions:

  1. Prepare Mounting Holes: Provide mounting holes in the wall that precisely match the product dimensions (refer to the dimensions diagram above).
  2. Wiring: Push the junction box into the prepared opening. Complete the electrical wiring. Connect the Live (L) wire to the Red terminal and the Neutral (N) wire to the Blue terminal. Ensure all connections are secure. The light operates on AC 85-265V.
  3. Secure Light Fitting: Once wiring is complete and secure, gently push the light fitting inwards into the junction box until it sits flush with the wall surface.

WARNING:

Cut-out size must match product specifications exactly. An incorrect opening may lead to installation failure or damage to the product.

Wiring diagram and installation steps for KPSUN LED Stair Light

Image: Diagram showing the parallel wiring for multiple lights (AC85-265V, L-Red, N-Blue) and the three-step installation process.

3. Operating Instructions

Once properly installed and wired, the KPSUN LED Stair Light operates like any standard light fixture. Simply turn on the power supply from your wall switch to illuminate the light. There are no additional controls on the unit itself.

4. Maintenance

  • Cleaning: To clean the light fixture, ensure the power is turned off. Use a soft, dry cloth to wipe away dust. For stubborn marks, a slightly damp cloth can be used, followed by drying immediately. Avoid abrasive cleaners or solvents.
  • No User-Serviceable Parts: The LED module is integrated and not user-replaceable. Do not attempt to open or repair the unit.

5. Troubleshooting

  • Light Does Not Turn On:
    • Check if the power supply to the light is active (e.g., wall switch is on).
    • Verify the circuit breaker has not tripped.
    • Ensure all wiring connections (Live, Neutral) are secure and correctly made. If unsure, consult a qualified electrician.
  • Light Flickers:
    • Check for loose wiring connections.
    • Ensure the voltage supply is stable and within the specified range (AC 85-265V).

6. Specifications

AttributeSpecification
Brand NameKPSUN
Model Numberstaircase light
Power1W Stair Wall Light
VoltageAC 90 - 260 V
Light SourceLED
Luminous Flux60-249 Lumens
Color TemperatureWarm White (3000K), Natural White (4000K), Cold White (6000K)
MaterialAluminum
Installation TypeRecessed In (self-contained)
Lighting Area1-3 square meters
Shade TypeShadeless
Shade DirectionUp & Down
Waterproof RatingIndoor IP20
Dimensions (Light Fitting)90mm (Width) x 90mm (Height)
Dimensions (Junction Box)80mm (Height) x 70mm (Depth) x 50mm (Width)
CertificationCE
Is Smart DeviceNo

7. User Tips

  • No Motion Sensor: This model does not include a motion detector. It operates as a standard on/off light fixture.
  • Optimal Placement: For best lighting effect on stairs, consider installing lights at consistent intervals and heights, typically low on the wall to illuminate the steps directly.
  • Color Temperature Choice: Warm White (3000K) provides a cozy ambiance, Natural White (4000K) offers a neutral, balanced light, and Cold White (6000K) gives a brighter, more modern feel. Choose according to your room's aesthetic.

8. Warranty and Support

This KPSUN LED Stair Light comes with a general product warranty of 3 years from the date of purchase. Additionally, a specific Two-year free replacement commitment is provided for manufacturing defects.

For further details or technical support, please refer to the official user manual PDF available from the seller: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.