1. Product Overview
The AUXITO T10 (W5W/194) LED Car Interior Light Bulb is designed to replace original halogen bulbs, offering high-brightness, energy-saving technology, and a shock-resistant, temperature-tolerant design. These bulbs enhance illumination and warning effects, fitting most vehicle models' corresponding light positions.
Key Features:
- Extraordinary quality, low power consumption, eco-friendly.
- 360° illumination: Equipped with 1pcs 3030SMD + 12pcs 4014 SMD for comprehensive, no dark spot lighting.
- Universal T10/194 Connector: Improved plug designed to sit tightly into original sockets.
- Built-in Intelligent IC Driver: Ensures constant current and Canbus error-free operation for 95%+ vehicles.
- Fast Heat Dissipation: Constructed with aviation aluminum material, featuring a hollow inner body design and a built-in intelligent IC that adjusts temperature automatically.
- Non-polarity design for plug & play easy installation.


2. Safety & Warnings
- CHOKING HAZARD: Small parts. Not for children under 3 years.
- Exclusively for DC12V vehicle electrical systems. Never connect to 24V power sources to prevent LED burnout.
- Handle with bare hands during installation; do not touch LED chips with sharp objects to prevent damage.
- Avoid touching the lamp body after illumination to prevent burns from high temperatures.
- Do not disassemble the lamp body; doing so will void the warranty.
- For turn signal/brake light models, ensure LED power compatibility to prevent flickering or failure.
3. Specifications
| Attribute | Value |
|---|---|
| Rated Voltage | 12 V |
| Interface Type | T10 (W5W/194) |
| Lumens | 240LM |
| Item Weight | 25g |
| Wattage | 2W |
| Emitting Color Options | 6500k white, red, amber yellow |
| Application 1 | Dome Light, Reading Light, Trunk Lamp, Mirror Light, Parking Light |
| Application 2 | Side Marker Light, License Plate Light, Clearance light bulbs |
| For Vehicle Brands/Model | Universal |
| Origin | Mainland China |


4. Installation Steps
Installation is direct plug-in, no modification required.
- Before installation, turn off the vehicle power and remove the key to prevent short circuits.
- Locate the original socket. Pinch the socket and twist to remove the original bulb, or pull it straight out.
- Align the new LED bulb with the socket and insert fully. Gently shake to confirm secure seating.
- Turn on power to test illumination.
- If the light fails to illuminate, remove the bulb, reverse its orientation (swap polarity), and reinsert. Ensure secure seating before replacing the socket cover.

5. Operation
Once installed, the AUXITO T10 LED bulbs operate automatically with your vehicle's electrical system. They are designed for continuous illumination in their designated light positions (e.g., dome light, license plate light) when the vehicle's corresponding lighting function is activated.
The non-polarity design ensures that the bulb will light up regardless of its insertion direction, simplifying the installation process. If the bulb does not light up initially, simply remove it, rotate it 180 degrees, and reinsert it into the socket.
6. Maintenance
AUXITO LED bulbs are designed for long-term, maintenance-free operation. To ensure optimal performance and longevity:
- Keep the bulbs clean and free from dust or debris. Use a soft, dry cloth for cleaning if necessary.
- Avoid exposing the bulbs to excessive moisture or harsh chemicals.
- Do not attempt to disassemble or modify the bulbs, as this will void the warranty and may cause damage.
- Regularly check the light output to ensure consistent brightness and functionality.
7. Troubleshooting
If you encounter issues with your AUXITO T10 LED bulbs, refer to the following common problems and solutions:
7.1. Canbus System Issues (Flickering, Error Warnings)
Some vehicles equipped with a Canbus system may experience issues like flickering or error warnings when installing LED bulbs. This is due to the lower power consumption of LEDs compared to traditional halogen bulbs, which the Canbus system may interpret as a "bulb out" error.
Solution:
- Connect suitable Canbus decoders (load resistors) to resolve these problems. If these decoders do not work, you may be eligible for a full refund under warranty.
7.2. Installation Problems (Bulb Not Fitting)
In some rare cases, certain vehicles may not be able to install the bulbs due to limited installation space.
Solution:
- Double-check your vehicle's bulb size requirements and available space before purchase. If the bulb does not fit, it may be covered under warranty for installation problems.
7.3. Bulb Not Illuminating
If the bulb does not light up after installation:
- Remove the bulb, reverse its orientation (swap polarity), and reinsert. The non-polarity design should allow it to work in either direction, but sometimes a re-insertion helps establish contact.
- Ensure the bulb is securely seated in the socket.
- Verify that the vehicle's power is on and the corresponding light function is activated.
8. User Tips
- Always confirm the correct bulb size and type for your specific vehicle application before purchasing to avoid compatibility issues.
- When replacing multiple bulbs, test each new LED bulb individually after installation to quickly identify any potential issues.
- If you experience hyper-flashing with turn signals, a load resistor (Canbus decoder) is typically required.
9. Warranty & Support
AUXITO offers a 12-month warranty on its products. For any warranty claims or support, please contact us through AliExpress message.
Steps to Get Warranty Honored:
- If you have checked the Questions & Answers (or troubleshooting section) and confirmed the product has failed, please follow these steps:
- Take a photo to show the code on the bottom of the lamp.
- Send the pictures to us. We will arrange replacements for you after checking the pictures.
Conditions Beyond Warranty Scope:
- Canbus Problem: Issues arising from Canbus systems (flickering, error warnings) that cannot be resolved with suitable decoders.
- Installation Problem: Inability to install bulbs due to limited installation space in some vehicles.
- Natural Disaster: Damages due to irresistible natural disasters like earthquake, flood, etc.
For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)
10. Manufacturer & EU Representative Information
Manufacturer:
- SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
- Address: NO.504, BUILDIND 225, BULONG ROAD, MAANTANG COMMUN BANTIAN STREET, LONGGANG SHENZHEN 518028 GUANGDONG, Mainland China
- E-mail/Tel: Tuyao_AF@163.com / +86 15220052490
EU Authorized Representative:
- APEX CE SPECIALISTS LIMITED
- Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
- Contact: Wells Yan
- Email: Info@apex-ce.com
- Tel: +49 21312066043
Compliance: FC CE RoHS
