1. Introduction
Thank you for choosing the Savior Heat Heated Ski Mask. This manual provides essential information for the safe and effective use of your product. Please read it thoroughly before use and keep it for future reference.
What's Included:
- 1 x Heated Ski Mask
- 1 x Pair of 7.4V 2200mAh Li-Polymer rechargeable batteries
- 1 x 8.4V Dual Battery Charger
- 1 x Carry Bag
- 1 x User Manual (this document)
Product Overview:
The Savior Heat Heated Ski Mask is designed to provide warmth and comfort in cold weather conditions, making it ideal for various outdoor activities. It features multiple heating settings, a breathable design, and a plush lining for enhanced insulation.


2. Setup
2.1. Charging the Batteries
Before first use, fully charge the batteries with the provided charger kit.
- Remove batteries from the mask before charging.
- Connect the batteries to the 8.4V dual battery charger.
- Charge at room temperature for 4-6 hours.
- A red light on the charger indicates charging.
- A green light indicates charging is complete.

2.2. Installing Batteries
Once charged, carefully connect the batteries to the power wire located in the mask's battery pocket.

3. Operation
3.1. Powering On and Adjusting Heat Settings
The mask features a power button on the side, which also acts as a controller for the heat settings.
- Turn On: Press and hold the power button for 2 seconds. The mask will start in High heat level (Red LED).
- Adjust Heat: Press the button once to cycle through heat levels:
- High Level: Red LED (100% heat, approx. 2-2.5 hours runtime)
- Medium Level: White LED (66% heat, approx. 3-3.5 hours runtime)
- Low Level: Blue LED (33% heat, approx. 6-6.5 hours runtime)
- Turn Off: Press and hold the button for 2 seconds at any level.

3.2. Battery Power Indicators
Each time the heating level is adjusted, the battery indicator lights will show the remaining power for 5 seconds.
- 4 lights on: 100% power
- 3 lights on: 75% power
- 2 lights on: 50% power
- 1 light on and flashing: 25% power
4. Maintenance
4.1. Washing Instructions
- Always remove the battery from the mask before cleaning or storing.
- Use mild detergent to clean only the soiled spots.
- Hand wash only.
- Air dry flat.
- Do not machine dry or use bleach.
4.2. Battery Care and Safety
- Charging: Always use the original charger. Improper charging can cause severe risks.
- Handling: Do not disassemble, crush, squeeze, or throw the battery into fire.
- Storage: Store the battery in a cool, dry place, away from direct sunlight or heat sources. Do not store it fully charged or discharged for long periods.
- Regular Maintenance: Charge and discharge the batteries at least once every 3 months to maintain usability if the product is not in use.
- Inspection: Regularly inspect the battery for damage, swelling, leaks, or discoloration. If any issues are found, stop using it immediately and replace it.
- Short Circuiting: Keep the battery away from metal objects (paper clips, coins, keys, nails, screws) to prevent short circuits.
5. Specifications
| Feature | Description |
|---|---|
| Brand Name | Savior Heat |
| Material | POLYESTER (Shell Fabric: full polyester sanding cloth, Lining: fleece, Mask: dust sponge) |
| Battery Capacity | 1801mAh-3000mAh (7.4V 2200mAh Li-Polymer) |
| Voltage | 5.1-7.4V |
| Heating Layer | 7.4V*5W |
| Heating Temperature | 35 to 55 degrees Celsius (High: 65°C/149°F, Medium: 50°C/122°F, Low: 40°C/104°F) |
| Heating Time | 2 hours to 6 hours (High: 2-2.5h, Medium: 3-3.5h, Low: 6-6.5h) |
| Gear | 3 (heating levels) |
| Rechargeable | Yes |
| Function | Windproof, Keep Warm |
| Usage Scenarios | Skiing, Hiking, Cycling, Motorcycling, Snowboarding, Outdoor Sports |
| Hat Height (S/L) | 25CM / 28CM |
| Hat Width (S/L) | 42CM / 45CM |

6. Troubleshooting & Safety Warnings
General Warnings:
- Do not use in environments exceeding 50°C/122°F or near open flames.
- Do not use the battery after it has been soaked in water.
- If any area becomes excessively hot during use, there may be a short circuit in the heating wire. Stop using the product immediately.
- Do not use the product while sleeping.
- Do not use the product if your hands or feet have bacterial infections or other medical conditions.
Battery-Specific Warnings:
- Once the battery is fully charged and the green light appears, remove the battery promptly. Do not leave the battery charging unattended.
- Do NOT disassemble, knock, squeeze the battery, or throw it into the fire.
- If the battery swells or becomes malformed, stop using it immediately.
- If the battery leaks liquid, avoid contact. In case of accidental contact, flush the affected area with water. If liquid contacts eyes, seek medical attention.
- For swollen batteries, place in a metal bucket with at least 8 liters of water for 48 hours, then dispose of at a local recycling point.
7. User Tips
- Breathing Comfort: Some users have noted that the breathing holes might feel restricted due to the lining. If you experience discomfort, ensure the mesh area is properly aligned and consider adjusting the mask's fit.
- Helmet Compatibility: The mask's thickness might make it challenging to wear comfortably under some helmets. Test the fit with your helmet before extended use.
- Optimal Warmth: For maximum warmth, ensure the mask is snug but not overly tight, allowing the heating elements to be close to your skin without restricting circulation.
- Battery Life: To prolong battery life, remember to charge and discharge the batteries at least once every three months, even when not in use.
8. Warranty & Support
Warranty Clauses:
Li-Polymer batteries, charger, and the heated mask are covered by a 12-month warranty period from the date of purchase.
Customer Support:
For any questions, concerns, or support needs, please contact us at:
Email: info@saviorheat.com
You can also refer to the full user manual PDF for more detailed information: View User Manual (PDF)