Hongwin MD614735

Contents

Throttle Position Sensor MD614735 User Manual

Model: MD614735 | Brand: Hongwin

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Hongwin MD614735 Throttle Position Sensor.

Safety Warnings

WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.

Always ensure the vehicle's battery is disconnected before performing any installation or maintenance on electrical components to prevent injury or damage.

Product Overview

The Hongwin MD614735 Throttle Position Sensor (TPS) is a piezoelectric sensor designed for precise measurement of the throttle valve opening angle in compatible vehicles. This sensor plays a crucial role in the engine management system by providing data to the Engine Control Unit (ECU) for optimal fuel injection and ignition timing.

Hongwin MD614735 Throttle Position Sensor
Figure 1: Hongwin MD614735 Throttle Position Sensor (Front View)
Throttle Position Sensor Connector Pins
Figure 2: Close-up of the sensor's electrical connector pins.

Specifications

Attribute Value
Brand Name Ribuenyou (Hongwin)
OEM NO. MD614735, TH246, TPS4064
Sensor Type Piezoelectric
Type Linear Expression Type
Repeatability MD614735, TH246, TPS4064
Hysteresis MD614735, TH246, TPS4064
Linear MD614735, TH246, TPS4064
Measuring Range MD614735, TH246, TPS4064
Sensitivity MD614735, TH246, TPS4064
Resolution MD614735, TH246, TPS4064
Origin Mainland China

Compatible Vehicles

  • MITSUBISHI Galant
  • MITSUBISHI Pajero
  • MITSUBISHI FTO
  • MITSUBISHI Montero
  • MITSUBISHI Sigma
  • MITSUBISHI Challenger
  • MITSUBISHI Diamante (1997-2001)
  • MITSUBISHI Montero Sport (1998-2000)

Installation Instructions

  1. Safety First: Ensure the vehicle's ignition is off and the battery's negative terminal is disconnected before beginning installation.
  2. Locate the Old Sensor: Identify the existing Throttle Position Sensor on your vehicle's throttle body. Consult your vehicle's service manual for the exact location if needed.
  3. Disconnect Wiring: Carefully disconnect the electrical connector from the old TPS. Take care not to damage the plug or wiring.
  4. Remove Old Sensor: Unscrew or unclip the old TPS from the throttle body. Note its orientation for correct installation of the new sensor.
  5. Install New Sensor: Position the new Hongwin MD614735 TPS onto the throttle body. Ensure it aligns correctly with the throttle shaft.
  6. Secure Sensor: Fasten the new TPS using the original screws or clips. Do not overtighten.
  7. Connect Wiring: Reconnect the electrical plug to the new TPS. Ensure a secure connection.
  8. Verify Rotation: The sensor is designed for "Anti Clock" rotation. When installing, ensure the internal mechanism rotates counter-clockwise as the throttle opens.
  9. Throttle Position Sensor Anti-Clockwise Rotation
    Figure 3: Internal mechanism showing "Anti Clock" (counter-clockwise) rotation.
  10. Reconnect Battery: Reconnect the vehicle's negative battery terminal.
  11. Perform Calibration (if required): Some vehicles may require a TPS calibration procedure after replacement. Refer to your vehicle's service manual for specific instructions. This may involve turning the ignition on (without starting) for a few seconds, then off, or a more complex procedure using a diagnostic tool.

For detailed vehicle-specific instructions, please refer to your car's official service manual.

Operation

The Throttle Position Sensor (TPS) continuously monitors the position of the throttle plate. As the accelerator pedal is pressed, the throttle plate opens, and the TPS sends a corresponding voltage signal to the ECU. The ECU uses this signal to:

  • Adjust fuel injection quantity.
  • Control ignition timing.
  • Manage automatic transmission shift points.
  • Regulate idle speed control.
  • Activate fuel cut-off during deceleration.

A properly functioning TPS ensures smooth engine operation, optimal fuel efficiency, and correct power delivery across the entire throttle range.

Maintenance

The Hongwin MD614735 Throttle Position Sensor is designed to be a maintenance-free component. However, to ensure its longevity and proper function:

  • Keep Connections Clean: Periodically inspect the electrical connector for corrosion or loose connections. Clean with an appropriate electrical contact cleaner if necessary.
  • Avoid Physical Damage: Protect the sensor from impacts or excessive force during other engine compartment work.
  • Professional Inspection: If you suspect an issue with the TPS, it is recommended to have it diagnosed by a qualified automotive technician.

Troubleshooting

Common symptoms of a faulty Throttle Position Sensor include:

  • Rough idle or stalling.
  • Hesitation or surging during acceleration.
  • Poor fuel economy.
  • Check Engine Light (CEL) illumination with related diagnostic trouble codes (DTCs) such as P0120, P0121, P0122, P0123, P0124.
  • Automatic transmission shifting issues.

If you experience any of these symptoms, it is advisable to:

  1. Check for DTCs: Use an OBD-II scanner to retrieve any stored diagnostic trouble codes.
  2. Inspect Wiring: Visually inspect the sensor's wiring harness and connector for any signs of damage, corrosion, or loose connections.
  3. Test Sensor Output: A multimeter can be used to test the voltage output of the TPS across its operating range. Consult your vehicle's service manual for expected voltage values.
  4. Professional Diagnosis: If basic checks do not resolve the issue, seek professional assistance from a certified mechanic.

User Tips

  • Many users have reported that this sensor works perfectly and is of excellent quality, especially for Mitsubishi vehicles.
  • Ensure to verify compatibility with your specific vehicle model and year before installation.
  • Always handle the sensor and its electrical connector with care during installation to prevent damage.

Frequently Asked Questions

Q: Is this sensor compatible with a 1999 Mitsubishi Carisma 1.6 manual (90 hp, sedan)?
A: The provided compatibility list includes various Mitsubishi models such as Galant, Pajero, FTO, Montero, Sigma, Challenger, Diamante (1997-2001), and Montero Sport (1998-2000). While Carisma is not explicitly listed, it is crucial to cross-reference the OEM part numbers (MD614735, TH246, TPS4064) with your vehicle's original sensor or consult a Mitsubishi parts catalog to confirm compatibility for your specific 1999 Carisma 1.6 manual model.

Warranty and Support

Warranty: This product comes with a one-year guarantee from the date of purchase.

Manufacturer Information

  • Brand: Hongwin
  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Country Origin: Mainland China
  • Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China
  • Customer Service Email: inf@hwautoparts.com
  • Telephone: +86-18005775583

European Representative (EC REP)

  • Representative: MJCM SARL
  • Address: CN-78 avenue des Champs Elysees Office 326
  • Telephone: +33-767213611
  • E-mail: mjcm190928@gmail.com

For additional information and detailed documents, you may refer to the User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.