1. Introduction
This manual provides detailed instructions for the safe and efficient use of your Teschev 7KW Portable EV Charger, Model TS-QB05. This device is designed for AC charging mode 2 and connection mode B, offering flexible and adjustable current settings for various electric vehicles. Please read this manual thoroughly before operating the charger.
Image: Teschev 7KW Portable EV Charger with Type 1 connector and control box.
2. Safety Information and Precautions
- Always ensure personal safety and take precautions to prevent electric shock.
- Use only a power cord that meets national and local electrical standards.
- Do not use the charger if it appears damaged or if any part of the cable is frayed.
- Keep the charger away from water, flammable materials, and extreme temperatures.
- Do not attempt to open, disassemble, or repair the charger yourself. Contact qualified personnel for service.
- Ensure the charging environment is well-ventilated.
3. Product Specifications
| Feature | Specification |
|---|---|
| Charger Type | 7KW Portable EV Charger |
| Voltage | 250V / 240V (Rated AC operating voltage: 80-260V AC) |
| Current | 8A/10A/13A/16A/20A/24A/32A Adjustable (Rated AC operating current: 32A MAX) |
| Power (W) | 7kw |
| IP Rating | IP65 |
| Material | ABS |
| Weight | 2.7KG |
| Length | About 5 meters |
| Working Temperature | -30 to 55°C |
| Operating Humidity Range | 3-95% RH |
| Storage Temperature Range | -50 to 85°C |
| Elevation | Less than 2000 m |
| Flame Retardant Rating | UL94V0 |
| Operating Frequency | 50-60HZ |
| Residual Current Rated Operating Current | M22mA |
| Duty Ratio | 26.67%@1KHZ |
Note: Unless otherwise specified, environmental temperature for parameters is 25°C.
4. Setup and Connection
- Unpack the EV charger and ensure all components are present and undamaged.
- Connect the control box's 32A CEE plug into a compatible 16A socket that meets national standards.
- The control box will perform a self-test. During this, the lock indicator will flash constantly. After the self-test, it will enter standby mode (no charging gun inserted).
- Open the charging port cover on your electric vehicle.
- Insert the charging gun into your vehicle's charging port. Ensure it is securely connected.
Video: Demonstration of unpacking, connecting the CEE plug, and plugging the charging gun into an electric vehicle.
Image: Diagram illustrating the CEE Plug and its connection points.
Image: Visual comparison of Type 1, Type 2, and GBT EV charger connectors.
5. Operation
5.1 Current Setting
- Ensure the charger is powered on but NOT yet plugged into the vehicle.
- In standby state, press and hold the touch button on the control box for 2 seconds to enter the current setting mode. The corresponding current indicator will flash.
- Click the touch area to cycle through and select your desired current (8A, 10A, 13A, 16A, 20A, 24A, 32A). The selected current indicator will flash.
- After selecting the desired current, press and hold the touch button for 2 seconds to confirm the setting. The control board will save the current value, initialize, and run with the newly-set current.
- Now, plug the charging gun into your vehicle to begin charging with the selected current.
Image: Control box display showing power and time settings, indicating adjustable current.
Image: Detailed view of the control box display showing real-time data such as temperature, voltage, and current.
5.2 Charging Reservation Process (Off-Peak Charging)
This feature allows you to reserve charging for off-peak hours to save money and effort. Charging can be reserved for 1 to 10 hours.
- Power on the charger first (do not plug it into the vehicle).
- Long press the touch button for 3 seconds to enter the secondary menu and select the charging reservation time.
- Long press the touch button for 3 seconds again to enter the charging reservation setting.
- Press the "charge after 1 hour" button once to set the reservation.
- Long press the touch button for 3 seconds to lock the reservation setting.
- Plug the charging gun into your vehicle and wait for the countdown to conduct automatic charging at the reserved time.
Image: Charger connected to a car, illustrating its portability and the display showing the reservation feature.
6. Display Analysis
The control box display provides real-time information about the charging process:
- 32A: Indicates the selected current level (e.g., 32A).
- 7KWh: Shows the average hourly charging degree.
- 01:05:50: Displays the single cumulative charging time.
- 28°C: Represents the real-time temperature.
- 7KW: Indicates the single cumulative charging degree.
- 226V: Shows the current power supply voltage.
- 6.0V: Displays the signal voltage for the ground line.
- Charger: Indicates the charging current.
7. Protection Box Functions
The charger is equipped with multiple safety features to ensure reliable operation:
- Overvoltage protection
- Undervoltage protection
- Overcurrent protection
- Electricity leakage protection
- Grounding protection: Continuous monitoring of grounding protection
- Protection in case the ground line is not connected
- Lightning protection
- Over-temperature protection
- Power regulation: 8A, 10A, 13A, 16A, 20A, 24A, 32A (touch adjustment)
8. Troubleshooting (Indicator Definition and Action Scheme)
The control board uses a combination of green, blue, and red indicator lights to communicate its status and any potential fault conditions. The flashing frequency during protection is 0.5 seconds on and 0.5 seconds off. After the specified number of flashes, it flashes again at intervals of 2 seconds.
| Status/Fault Code | Green | Blue | Red (Flashes and Stops for 2s) |
|---|---|---|---|
| Standby | On | Off | Off |
| Connecting | Flash | Off | Off |
| Charging | On | Flash | Off |
| End of charging | Off | On | Off |
| Overtemperature (E1) | Off | Off | Flashes once |
| Undervoltage (E2) | Off | Off | Flashes twice |
| Overvoltage (E3) | Off | Off | Flashes three times |
| Grounding (E4) | Off | Off | Flashes four times |
| Temporary overcurrent (E5) | Off | Off | Flashes five times |
| Permanent Overcurrent (E6) | Off | Off | Flashes six times |
| Leakage (E7) | Off | Off | Flashes seven times |
| Relay adhesion (E8) | Off | Off | Flashes eight times |
| CP Anomaly (E9) | Off | Off | Flashes nine times |
| Emergency stop (E10) | Off | Off | Flashes ten times |
| Small current stop (E11) | Off | Off | Flashes eleven times |
| Plug overtemperature (E12) | Off | Off | Flashes twelve times |
9. Maintenance
- Keep the charger clean and dry. Use a soft, dry cloth to wipe the exterior.
- Avoid exposing the charger to extreme temperatures, direct sunlight, or harsh weather conditions for prolonged periods.
- Regularly inspect the charging cable and connectors for any signs of wear, damage, or corrosion. Do not use if damaged.
- Store the charger in a cool, dry place when not in use, preferably in its original carrying bag.
- Do not attempt to open or repair the unit yourself. Unauthorized repairs will void the warranty and may pose safety risks.
10. User Tips
No specific user tips available at this time. Please refer to the operation section for optimal usage.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.