GIRIER Tuya ZigBee 3.0 Smart Switch Module

Contents

GIRIER Tuya ZigBee 3.0 Smart Switch Module User Manual

Model: Tuya ZigBee 3.0 Smart Switch Module

1. Product Overview

The GIRIER Tuya ZigBee 3.0 Smart Switch Module is a compact device designed to convert traditional light switches into smart switches, enabling remote control via app, voice commands, and scheduling. It supports ZigBee 3.0 protocol and works with Tuya ZigBee hubs, Amazon Alexa, and Google Home. This module is specifically designed for installations where no neutral wire is available.

GIRIER ZigBee Smart Switch Modules (1CH, 2CH, 3CH, 4CH) with No Neutral Wire Required

Figure 1: Overview of 1CH, 2CH, 3CH, and 4CH GIRIER ZigBee Smart Switch Modules, highlighting 'No Neutral Wire Required' and compatibility with Tuya, ZigBee 3.0, Smart Life, Google Assistant, and Amazon Alexa.

GIRIER ZigBee Smart Switch Module Features

Figure 2: Key features of the module including Mini Body, Easy Install, Voice Control, Family Sharing, App Control, and Timing Function.

Video 1: Product demonstration and app pairing guide for the GIRIER Tuya ZigBee 3.0 Smart Switch Module.

2. Safety Warnings and Installation

2.1. Safety Warnings

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water, damp, or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
  • Do NOT attempt to disassemble, repair, or modify the device.
  • Important: Do not connect the neutral line. Otherwise, it will be permanently damaged.

2.2. System Requirements

  • WIFI Router: 2.4GHz network
  • ZigBee Gateway: Tuya ZigBee hub required
  • Mobile Device: iPhone, iPad (iOS 7.0 or higher) or Android 4.0 or higher

2.3. Wiring Instructions

Before starting, ensure the power supply is turned off at the circuit breaker to prevent electric shock.

  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the specific wiring diagram for your module type (1CH, 2CH, 3CH, or 4CH).
  3. Insert the module into the junction box behind your existing switch.
  4. Turn on the power supply and follow the switch module configuration instructions.
  5. If the light flickers after turning off, please install the provided capacitor close to the L1 bulb. Normally, if the L1 is connected to an LED bulb over 10W, there is no need to install the capacitor.
1CH ZigBee Switch Module Wiring Diagram

Figure 3: Wiring Diagram for 1CH ZigBee Switch Module-L, showing connections for Single Control and Double Switch configurations.

2CH ZigBee Switch Module Wiring Diagram

Figure 4: Wiring Diagram for 2CH ZigBee Switch Module-L, showing connections for Single Control and Double Switch configurations.

3CH ZigBee Switch Module Wiring Diagram

Figure 5: Wiring Diagram for 3CH ZigBee Switch Module-L, showing connections for Single Control and Double Switch configurations.

4CH ZigBee Switch Module Wiring Diagram

Figure 6: Wiring Diagram for 4CH ZigBee Switch Module-L, showing connections for rocker type and push switch configurations. Note: There is no 'Switch Type' option in the app; follow the wiring diagram to change the switch type.

3. Operating Instructions

3.1. App Installation and Pairing

  1. Download App: Scan the QR code on the product packaging or search for

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.