Introduction
Thank you for choosing our Premium Decorative Exhaust Tip. Designed specifically for your vehicle's make and model, this exhaust tip provides a seamless fit and an upgraded, aggressive aesthetic to your car's rear profile.
This manual provides detailed instructions for the installation, care, and maintenance of your new exhaust tip. Please read it thoroughly before proceeding with installation or use.
Video: Overview of the AK MUFFLERTIP Dual Exhaust Tip components and design.
Safety Warnings
SAFETY WARNING: Always ensure the vehicle is turned off and the exhaust system is completely cool to the touch before attempting any installation. Wearing safety gloves and protective eyewear is highly recommended.
Installation Instructions
Depending on your specific vehicle model and the corresponding exhaust tip design, your installation will fall into one of the three methods below. Please check your specific product package to determine which method applies to your vehicle.
Method 1: Professional Weld-On Installation
Requires cutting and welding.
- Measure and Mark: Align the new exhaust tip with your factory exhaust pipe to determine the precise cutting point. Mark the factory pipe accordingly.
- Cut: Carefully cut off the factory exhaust pipe at the marked location using appropriate metal-cutting tools. Remove any burrs or sharp edges.
- Weld: Position the new decorative exhaust tip over the cut pipe. Weld the tip securely in place, ensuring a full, leak-free seal around the joint.
- Note: Due to the requirement of specialized tools and skills, professional installation at a certified auto shop is highly required for this method.
Method 2: Direct Replacement Installation
No cutting or welding required.
- Remove Original: Loosen the bolts or clamps holding your factory exhaust tip in place and slide it off.
- Clean: Wipe down the exposed factory exhaust pipe to remove dirt, rust, or debris.
- Install: Slide the new custom-fit exhaust tip onto the factory pipe.
- Secure: Tighten the integrated bolts or clamps until the exhaust tip is firmly secured. Do not overtighten.
Method 3: Cut & Clamp-On Installation
Requires cutting, but no welding.
- Measure and Mark: Align the new exhaust tip alongside the factory pipe to determine the correct fitment length. Mark the factory pipe where the cut needs to be made.
- Cut: Cut the factory exhaust pipe at the marked location and file down any rough edges.
- Position: Slide the provided heavy-duty clamp over the new exhaust tip's inlet.
- Install and Clamp: Slide the new exhaust tip onto the newly cut factory pipe. Position it to your desired angle and depth, then securely tighten the clamp to lock it in place.
Operating Instructions
This exhaust tip is a passive component of your vehicle's exhaust system. Once correctly installed, it operates in conjunction with your vehicle's existing exhaust system. No specific operational steps are required beyond normal vehicle use.
Care and Maintenance
To maintain the premium finish of your exhaust tip, clean it regularly using mild soap, water, and a non-abrasive microfiber cloth. Avoid using harsh chemicals or abrasive steel wool, as these may scratch the surface or damage the coating.
Troubleshooting
Common Issues and Solutions:
- Improper Fitment: If the exhaust tip does not fit correctly, double-check the product's compatibility with your specific BMW F20/F21 model (116i, 118i, 120i) and year (2013-2016), as well as whether your vehicle has an 'M Sport' or 'Original' bumper. Some users have reported issues with the exhaust diameter not being right or the end muffler getting in the way, requiring pipe adjustments.
- Loose Installation: Ensure all clamps or welds are securely fastened. A loose tip can vibrate, create noise, or even detach. Re-tighten clamps or consult a professional for welding issues.
- Scratches or Damage to Finish: Refer to the 'Care and Maintenance' section for proper cleaning techniques. Avoid abrasive materials. Minor scratches may be polished out with appropriate metal polish, but deep damage may require professional repair or replacement.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | AK MUFFLERTIP |
| Type | Muffler |
| Material | Stainless Steel |
| Mounting Position | Rear |
| Origin | Mainland China |
| Country/Region of Car Manufacture | CN |
| OEM NO. | None |
| Certification | NONE |
| Package Length | 60 cm |
| Package Width | 33 cm |
| Package Height | 18 cm |
| Package Weight | 4.5 kg |
User Tips
- Verify Fitment Carefully: Before cutting or welding, perform a thorough dry fit to ensure the exhaust tip aligns perfectly with your vehicle's existing exhaust pipe and bumper. Some users have noted that the exhaust diameter might not be universally compatible, or the end muffler could obstruct proper installation, potentially requiring modifications to the pipe bend.
- Professional Installation Recommended for Complex Setups: If your vehicle requires bumper modification or if you are unsure about cutting and welding, consider professional installation to ensure optimal fit and performance.
- Consider Bumper Type: Pay close attention to whether your vehicle has an 'Original' or 'M Sport' bumper, as this dictates the correct product option and potential need for bumper cutting or replacement.
Frequently Asked Questions (FAQ)
- Q: Is this exhaust tip adaptable for a BMW 118d F20 2014?
- A: The product is specified for BMW F20 F21 116i, 118i, 120i models from 2013-2016. While 118d is an F20 model, specific compatibility for diesel variants should be confirmed with the seller or by checking the exhaust pipe diameter against the product's 63mm inlet diameter.
- Q: Can this be used on a BMW 116d 2016?
- A: Similar to the 118d, while the 116d is an F20 model within the specified year range, it's crucial to verify compatibility for diesel engines and ensure the exhaust pipe diameter matches the product's specifications (63mm ID).
- Q: Is the silencer okay for BMW F20 116d M?
- A: This product is an exhaust tip, not a full silencer or muffler. It is designed to enhance the aesthetic of your existing exhaust system. Compatibility for the F20 116d M Sport should be checked as mentioned above, focusing on the exhaust pipe diameter and bumper type.
- Q: Can I change the tips to my own ones?
- A: The exhaust tips are integrated into the design. While it might be possible with custom fabrication, the product is designed as a complete unit. Modifying the tips may void any warranty and could affect fitment or performance.
Warranty and Support
For any questions regarding installation, troubleshooting, or product support, please refer to the official user manual PDF available at User manual (PDF) or contact the manufacturer directly. Specific warranty details are typically provided with your purchase documentation.