ZHAOKE TW-002

Contents

ZHAOKE Retro Industrial Pendant Light User Manual

Model: TW-002 | Brand: ZHAOKE

Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ZHAOKE Retro Industrial Pendant Light. Please read these instructions carefully before beginning installation and retain this manual for future reference.

Safety Instructions

Failure to follow these safety instructions may result in fire, electric shock, serious injury, or property damage. Always adhere to local electrical codes and regulations.

  1. You must have a qualified electrician to assist you with installation.
  2. Be extremely cautious when connecting the luminaire to the power supply to avoid electric shock.
  3. Before starting any work, switch off and disconnect the mains power supply (230V, 100V, 110V, etc.).
  4. Check the course of the power lines before drilling to ensure you do not damage any existing power lines.
  5. If the power cable is damaged, the product is unusable. Do not attempt to repair it yourself.
Safety instruction diagram showing 8 steps for installing pendant lights

Figure 1: Overview of installation steps and safety warnings.

Package Contents

Verify that all components are present and undamaged before proceeding with installation. The package typically includes:

  • Pendant lampshade(s)
  • Lamp holder(s) (E27 base)
  • Adjustable cord(s)
  • Ceiling plate(s) (round or linear, depending on model)
  • Mounting hardware (screws, anchors, bracket)

Specifications

Feature Specification
Brand NameZHAOKE
Model NumberTW-002
Item TypePendant Lights
Installation TypeCord Pendant (Assembly Required)
StyleModern Style / Retro Industrial
MaterialMetal (Iron Finish)
TechnicsPainted
Power SourceAC
Voltage90 - 260 V
Base TypeE27
Max Wattage60W
Number of Light Sources1 (per pendant)
Bulbs IncludedNo
DimmableNo
Luminous Flux<60 (lumens, typical for decorative bulbs)
Lighting Area5-15 square meters
Suitable PlaceHotel Room, Parlor, Master Bedroom, Other Bedrooms, Hotel Hall, Study, Dining Room, Kitchen
OriginMainland China
CertificationCE, LVD
High-concerned chemicalNone
Is Include PCBAN

Note: Dimensions may vary slightly by specific model (single vs. multiple pendants, color variations).

Dimensions of a single black pendant light: 10cm ceiling plate, 100cm adjustable cable, 14cm shade height, 18cm shade diameter.

Figure 2: Single Pendant Light Dimensions (Example: Black)

Dimensions of a single orange pendant light: 10cm ceiling plate, 100cm adjustable cable, 16cm shade height, 18cm shade diameter.

Figure 3: Single Pendant Light Dimensions (Example: Orange)

Dimensions of a single black pendant light: 10cm ceiling plate, 100cm adjustable cable, 16cm shade height, 18cm shade diameter.

Figure 4: Single Pendant Light Dimensions (Example: Black, alternative shade height)

Dimensions of a triple pendant light with round ceiling plate: 25cm ceiling plate, 20-140cm adjustable cable, 16cm shade height, 18cm shade diameter.

Figure 5: Triple Pendant Light Dimensions (Round Ceiling Plate)

Dimensions of a single white pendant light: 10cm ceiling plate, 100cm adjustable cable, 16cm shade height, 18cm shade diameter.

Figure 6: Single Pendant Light Dimensions (Example: White)

Installation Guide

Installation should only be performed by a qualified electrician. Ensure power is disconnected at the main circuit breaker before starting.

General Assembly (Refer to Figure 7 for detailed view)

Detailed diagram of a single pendant light assembly, showing ceiling mount, cable, lamp holder, shade, and bulb.

Figure 7: Exploded view of a single pendant light assembly.

  1. Prepare the Ceiling: Secure the mounting bracket to the ceiling using appropriate screws and anchors. Ensure the bracket is firmly attached and can support the weight of the light fixture.
  2. Wire Connection: Connect the fixture's wires to the household electrical wires according to local electrical codes. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Ensure all connections are secure.
  3. Attach Ceiling Plate: Mount the ceiling plate to the mounting bracket, securing it with screws.
  4. Assemble Lamp Holder and Shade: Attach the lamp holder to the pendant cord. Then, secure the lampshade to the lamp holder. Ensure the shade is properly aligned and tightened.
  5. Install Bulb: Screw an E27 base bulb (Max 60W) into the lamp holder.
  6. Adjust Cable Length: Adjust the length of the pendant cord as desired. For single pendants, the cable is adjustable up to 100cm. For multiple pendants, the cable can be adjustable from 20-140cm.

Installation Steps for Multiple Pendants (Refer to Figure 8)

Installation steps for multiple pendant lights, showing mounting the linear ceiling plate, connecting wires, and attaching individual shades.

Figure 8: Installation sequence for multiple pendant lights.

  1. Mount Linear Ceiling Plate (Step 1 in Figure 8): Secure the linear ceiling plate to the ceiling.
  2. Connect Wires (Step 2 in Figure 8): Connect the electrical wires from the ceiling to the fixture's wiring within the ceiling plate.
  3. Assemble Lamp Holders (Step 3 in Figure 8): Attach the lamp holders to the pendant cords.
  4. Attach Shades (Step 4 in Figure 8): Secure the shades to the lamp holders.
  5. Final Mounting (Step 5, 6, 7 in Figure 8): Complete the mounting of the ceiling plate and adjust the pendant lengths as desired.

Operation

Once installed by a qualified electrician, your ZHAOKE Pendant Light operates like any standard light fixture. Simply use the wall switch connected to the circuit to turn the light on or off. This fixture is not dimmable.

Maintenance

  • Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Bulb Replacement: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely. Unscrew the old E27 bulb and screw in a new E27 bulb, ensuring it does not exceed 60W.
  • Regular Checks: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on No power to the fixture; Loose wiring; Faulty bulb Check circuit breaker; Verify wire connections (consult electrician); Replace bulb.
Flickering light Loose bulb; Incorrect bulb type/wattage; Loose wiring Tighten bulb; Ensure E27 Max 60W bulb is used; Consult electrician for wiring check.
Fixture is unstable/wobbly Improperly secured mounting bracket or ceiling plate Ensure all mounting hardware is securely fastened to the ceiling and fixture.

User Tips

  • Inspect Upon Arrival: Always check for all included parts and any cosmetic damage immediately upon receiving your product.
  • Bulb Compatibility: Ensure the bulb wattage does not exceed 60W and that the physical size of the bulb fits comfortably within the lampshade to prevent overheating or damage.
  • Local Standards: When installing, consider and adhere to your local electrical standards and regulations. If unsure, always consult a professional.
  • Cable Length: Note that the adjustable cable length varies by model: single pendants typically offer up to 100cm, while multiple pendant models can offer 20-140cm adjustment.
  • Aesthetic Versatility: These pendant lights are well-suited for a loft-style aesthetic and can be a great basis for custom lighting projects.

Warranty and Support

This ZHAOKE Pendant Light comes with a 3-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your retailer or the ZHAOKE customer service department.

For additional guides and documents, including a PDF user manual, please refer to the product page or contact customer support. The PDF manual can be referenced at: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.