1. Introduction
Thank you for choosing the ZEYEILY L801C LED Night Light. This slim design night light features a built-in dusk-to-dawn sensor and provides a warm white glow, making it ideal for various indoor spaces such as bedrooms, baby rooms, bathrooms, kitchens, corridors, hallways, stairways, basements, living rooms, and dining rooms.

Figure 1: Reliable Night Light Features - Warm white light (gentle & not glare), ABS material (safe & reliable), Photosensitive sensor (switch / adjust brightness).

Figure 2: High Technology Intelligent Sensing Components - Features Acrylic Frosted Diffuse Lighting, Premium Flame Retardant Shell, Phosphor Bronze Contacts, and a High Technology Light Sensor. Designed for Energy Saving, Fireproof, and CE Certification.
2. Setup and Installation
- Unpacking: Carefully remove the night light from its packaging.
- Placement: Plug the night light into a standard wall socket in a dark enough area. The light will turn on automatically when the ambient light is insufficient. The default color is warm white.
Important Precautions:
- Do not install this light in wet locations, high-temperature areas, or near an air vent. Doing so will affect its normal use and performance.
- This light has a built-in dusk-to-dawn sensor. It works best in areas where ambient brightness is less than 12 lux, as this is where the sensor is most sensitive.
- Ensure the socket is easily accessible for plugging and unplugging the device.
Video 1: Product Overview - A short demonstration of the ZEYEILY L801C LED Night Light, showcasing its design and plug type.
3. Operating Instructions
The ZEYEILY L801C LED Night Light operates automatically based on ambient light conditions and features a touch-sensitive switch for manual adjustments.
Automatic Operation:
- The night light will automatically turn on at dusk or when the room becomes dark.
- The night light will automatically turn off at dawn or when the room becomes bright.

Figure 3: Dusk to Dawn Sensor Operation - Illustrates how the light remains off during the day and illuminates at night.

Figure 4: Light Sensor Response Stages - Shows the light is off in daylight, gives out weak light at dusk, and full luminescence in dark night.
Manual Control (Touch Switch):
The night light features a touch-sensitive switch, typically located on the front of the device, for changing modes and setting timers.
- Default Mode: When plugged in, the light defaults to warm white.
- Auto-Cycle RGB Colors: Touch the switch once to change to auto-cycle RGB colors mode. There are 8 different colors in total: Red, Orange, Yellow, Green, Blue, Light Blue, Purple, and White.
- Pause on Favorite Color: Touch the switch again while in auto-cycle mode to pick and pause on your favorite color.
- Return to Warm White: Touch the switch a third time to return to the warm white color mode.
Timer Functions:
The night light also includes timer functions for automatic shut-off.
- 30-Minute Timer: Press and hold the switch (or a designated timer button if present) for the 30-minute timer. The night light will automatically turn off after 30 minutes.
- 60-Minute Timer: Press and hold the switch (or a designated timer button if present) for the 60-minute timer. The night light will automatically turn off after 1 hour.
- Canceling Timer: If a timer was set and you wish to cancel it, unplug the night light from the socket and then plug it back in.
4. Maintenance
- Cleaning: To clean the night light, ensure it is unplugged from the power outlet. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
- Storage: If storing the night light for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight and moisture.
- No User-Serviceable Parts: The night light contains no user-serviceable parts. Do not attempt to open or repair the device, as this will void the warranty and could pose a safety risk.
5. Troubleshooting
- Light does not turn on:
- Check if the night light is securely plugged into a working power outlet.
- Ensure the ambient light is dark enough (below 12 lux) for the sensor to activate. The light will not turn on if the room is already bright.
- Light does not turn off:
- Ensure the ambient light is bright enough for the sensor to deactivate. The light will remain on if the room is still dark.
- Check for any obstructions covering the light sensor.
- Light flickers:
- Flickering can occur if the light sensor detects two different ambient brightness levels simultaneously (e.g., one part of the sensor is covered while another is exposed to light).
- Remove any hand or obstacle covering the sensor. The light should return to normal operation.
6. Specifications

Figure 5: Product Dimensions - Height: 10cm / 3.94inch; Width: 5.5cm / 2.17inch; Depth: 6cm / 2.36inch.
| Feature | Detail |
|---|---|
| Model Number | L801C |
| Material | ABS + PC |
| Light Source | LED bulbs (3 pcs SMD LEDs) |
| Luminous Flux | 30 lm |
| Wattage | 0.7 W |
| Operating Voltage | AC100-240V (90 - 260 V) |
| Color Temperature | 2500-2700K |
| LED Life Time | More than 100,000 hours |
| Sensor Type | Light sensor (Photocell sensor) |
| Size | 2.5 x 5.3 x 10 cm (0.98 x 2.08 x 3.94 in) |
| Weight | 49 g (1.7 oz) |
| Working Temperature | -5°C to 50°C |
| Certifications | ROHS, CE, PSE, FCC, LVD, EMC |

Figure 6: Product Certifications - Displaying various compliance certificates including FCC, RoHS, and CE.
7. User Tips
- Sensor Type: Please note that this night light is equipped with a dusk-to-dawn light sensor, not a motion sensor. It will illuminate based on ambient light levels, staying on continuously when it's dark enough.
- Optimal Placement: For best performance, plug the night light into an outlet that is not obstructed by furniture or curtains, allowing the sensor to accurately detect ambient light.
- Versatile Use: This night light is ideal for various indoor places. Use it in kids' rooms to ease fear of darkness, in hallways or stairways to light your path, in living rooms or studies, kitchens, or even closets for convenience in the dark. It can also guide pets at night.
- Energy Efficiency: With a low power consumption of 0.7W, this LED night light is designed to be energy-efficient, providing illumination without significantly impacting your electricity bill.
8. Warranty and Support
After-sale Service:
Your ZEYEILY L801C LED Night Light comes with comprehensive after-sale support:
- 90-Day Money Back Guarantee: If you are not satisfied with your purchase, you may be eligible for a refund within 90 days.
- 12-Month Replacement Warranty: The product is covered by a 12-month replacement warranty for manufacturing defects.
- Lifetime Support Guarantee: We offer lifetime support for your product.
Warranty Extension:
You can extend your product warranty by an additional half-year by registering on our official website. Visit www.onehous.net and register with your email address.
Contact Support:
If you have any questions or require assistance with your ZEYEILY L801C LED Night Light, please do not hesitate to contact our support team:
- Email: service@onehous.net
We aim to reply to all messages within 24 hours. Thank you for your purchase!